From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: [PATCH 04/10] ARM: OMAP: Fix compile for beagle Date: Mon, 12 Jan 2009 16:42:18 +0200 Message-ID: <20090112144218.24205.15215.stgit@localhost> References: <20090112143405.24205.52151.stgit@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from mho-01-bos.mailhop.org ([63.208.196.178]:61046 "EHLO mho-01-bos.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752155AbZALOmW (ORCPT ); Mon, 12 Jan 2009 09:42:22 -0500 In-Reply-To: <20090112143405.24205.52151.stgit@localhost> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-arm-kernel@lists.arm.linux.org.uk Cc: linux-omap@vger.kernel.org Move twl4030 gpio init code to where it should be. Also include twl4030.h. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9e5ada0..38c88fb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,8 @@ #include #include +#include + #include #include #include @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void) omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */