From: Paul Walmsley <paul@pwsan.com>
To: linux-arm-kernel@lists.arm.linux.org.uk, linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH A 00/10] OMAP clock, A of F: preliminaries
Date: Tue, 27 Jan 2009 19:12:43 -0700 [thread overview]
Message-ID: <20090128020447.7244.80496.stgit@localhost.localdomain> (raw)
This series A is the first of six to bring the mainline kernel OMAP
clock code up-to-date with the linux-omap tree.
Major changes in this series:
. Clean up sparse, checkpatch issues in PM code
. Synchronize clock tree with what is on the hardware
. Add DPLL programming code
. Use PRCM rates for CPUfreq
Some patches have been "compressed" together, as requested by rmk -
original commit IDs are in the patch descriptions.
Compile-tested on OSK5912 (OMAP1), H4 and 2430SDP (OMAP2), and
BeagleBoard (OMAP3). Boot-tested on 2430SDP and BeagleBoard.
Applies on 5ee810072175042775e39bdd3eaaa68884c27805.
- Paul
---
Daniel Stone (1):
OMAP2: Fix definition of SGX clock register bits
Kevin Hilman (1):
OMAP2: Implement CPUfreq frequency table based on PRCM table
Paul Walmsley (6):
OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
OMAP3 clock: fix 96MHz clocks
OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer
OMAP24xx clock: add missing SSI L4 interface clock
OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code
OMAP2/3: Add non-CORE DPLL rate set code and M,N programming
Sergio Aguirre (1):
OMAP: Add CSI2 clock struct for handling it with clock API.
Tony Lindgren (1):
OMAP2/3: Remove OMAP_PRM_REGADDR, OMAP_CM_REGADDR
arch/arm/mach-omap2/clock.c | 83 ++--
arch/arm/mach-omap2/clock.h | 2
arch/arm/mach-omap2/clock24xx.c | 145 +++++--
arch/arm/mach-omap2/clock24xx.h | 335 +++++++++-------
arch/arm/mach-omap2/clock34xx.c | 141 +++++++
arch/arm/mach-omap2/clock34xx.h | 516 +++++++++++++------------
arch/arm/mach-omap2/cm-regbits-34xx.h | 25 +
arch/arm/mach-omap2/cm.h | 17 -
arch/arm/mach-omap2/memory.c | 3
arch/arm/mach-omap2/pm.c | 2
arch/arm/mach-omap2/powerdomains34xx.h | 1
arch/arm/mach-omap2/prm-regbits-34xx.h | 9
arch/arm/mach-omap2/prm.h | 166 ++++----
arch/arm/mach-omap2/sram242x.S | 5
arch/arm/mach-omap2/sram243x.S | 5
arch/arm/plat-omap/common.c | 1
arch/arm/plat-omap/cpu-omap.c | 57 +++
arch/arm/plat-omap/include/mach/clock.h | 11 -
arch/arm/plat-omap/include/mach/common.h | 5
arch/arm/plat-omap/include/mach/powerdomain.h | 1
arch/arm/plat-omap/include/mach/prcm.h | 5
arch/arm/plat-omap/include/mach/system.h | 4
22 files changed, 949 insertions(+), 590 deletions(-)
text data bss dec hex filename
3240479 164160 100912 3505551 357d8f vmlinux.beagle.orig
3241423 164192 100912 3506527 35815f vmlinux.beagle
next reply other threads:[~2009-01-28 20:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-28 2:12 Paul Walmsley [this message]
2009-01-28 2:12 ` [PATCH A 01/10] OMAP2/3: Add non-CORE DPLL rate set code and M, N programming Paul Walmsley
2009-01-28 22:10 ` Russell King - ARM Linux
2009-01-28 22:26 ` Russell King - ARM Linux
2009-01-29 7:21 ` Paul Walmsley
2009-01-29 14:23 ` Russell King - ARM Linux
2009-01-30 5:57 ` Paul Walmsley
2009-01-30 8:45 ` Russell King - ARM Linux
2009-01-28 2:12 ` [PATCH A 02/10] OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code Paul Walmsley
2009-01-28 2:12 ` [PATCH A 03/10] OMAP24xx clock: add missing SSI L4 interface clock Paul Walmsley
2009-01-28 2:12 ` [PATCH A 04/10] OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer Paul Walmsley
2009-01-28 2:13 ` [PATCH A 05/10] OMAP3 clock: fix 96MHz clocks Paul Walmsley
2009-01-28 2:13 ` [PATCH A 06/10] OMAP2: Fix definition of SGX clock register bits Paul Walmsley
2009-01-28 2:13 ` [PATCH A 07/10] OMAP: Add CSI2 clock struct for handling it with clock API Paul Walmsley
2009-01-28 2:13 ` [PATCH A 08/10] OMAP: Make dpll4_m4_ck programmable with clk_set_rate() Paul Walmsley
2009-01-28 2:13 ` [PATCH A 09/10] OMAP2/3: Remove OMAP_PRM_REGADDR, OMAP_CM_REGADDR Paul Walmsley
2009-01-28 23:28 ` Russell King - ARM Linux
2009-01-29 7:40 ` Paul Walmsley
2009-03-03 2:34 ` Kevin Hilman
2009-03-03 2:48 ` Paul Walmsley
2009-03-03 8:28 ` Russell King - ARM Linux
2009-03-03 15:09 ` Kevin Hilman
2009-03-03 16:45 ` Russell King - ARM Linux
2009-03-05 10:07 ` Paul Walmsley
2009-03-05 10:14 ` Paul Walmsley
2009-01-28 2:13 ` [PATCH A 10/10] OMAP2: Implement CPUfreq frequency table based on PRCM table Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090128020447.7244.80496.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox