[PATCH B 07/10] OMAP3 powerdomains: remove RET from SGX power states list

[Paul Walmsley <paul@pwsan.com>]

The SGX device on OMAP3 does not support retention, so remove RET from the
list of possible SGX power states.  Problem debugged by Richard Woodruff
<r-woodruff2@ti.com>.

Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/powerdomains34xx.h |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 446a1ed..edfad42 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -255,6 +255,11 @@ static struct powerdomain dss_pwrdm = {
 	},
 };
 
+/*
+ * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
+ * possible SGX powerstate, the SGX device itself does not support
+ * retention.
+ */
 static struct powerdomain sgx_pwrdm = {
 	.name		  = "sgx_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
@@ -262,7 +267,7 @@ static struct powerdomain sgx_pwrdm = {
 	.wkdep_srcs	  = gfx_sgx_wkdeps,
 	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	/* XXX This is accurate for 3430 SGX, but what about GFX? */
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {