From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Walmsley Subject: [PATCH E 07/14] OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init() Date: Wed, 28 Jan 2009 12:27:48 -0700 Message-ID: <20090128192745.29333.13603.stgit@localhost.localdomain> References: <20090128192551.29333.82943.stgit@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from utopia.booyaka.com ([72.9.107.138]:32916 "EHLO utopia.booyaka.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755374AbZA1U30 (ORCPT ); Wed, 28 Jan 2009 15:29:26 -0500 In-Reply-To: <20090128192551.29333.82943.stgit@localhost.localdomain> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-arm-kernel@lists.arm.linux.org.uk, linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org, Paul Walmsley , Tony Lindgren Use the standard clk_set_rate() function in omap2_clk_arch_init() rather than omap2_select_table_rate() -- this will ensure that clock rates are recalculated and propagated correctly after those operations are consolidated into clk_set_rate(). linux-omap source commit is 03c03330017eeb445b01957608ff5db49a7151b6. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 2 +- arch/arm/mach-omap2/clock34xx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 640a2cb..3727a73 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -502,7 +502,7 @@ static int __init omap2_clk_arch_init(void) if (!mpurate) return -EINVAL; - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + if (clk_set_rate(&virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); recalculate_root_clocks(); diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 2c655be..738a029 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -665,7 +665,7 @@ static int __init omap2_clk_arch_init(void) /* REVISIT: not yet ready for 343x */ #if 0 - if (omap2_select_table_rate(&virt_prcm_set, mpurate)) + if (clk_set_rate(&virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); #endif