From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH v2] board-omap3beagle: set i2c-3 to 100kHz Date: Fri, 20 Feb 2009 08:25:00 -0800 Message-ID: <20090220162459.GL7414@atomide.com> References: <1232873177-15531-1-git-send-email-koen@openembedded.org> <200901250404.11059.david-b@pacbell.net> <1DDF6542-7A64-44F0-9B7B-7B841D02A512@beagleboard.org> <0447C4C2-86D0-4FC4-9C33-E09CDE1D2055@student.utwente.nl> <20090206222255.GJ10721@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-01-bos.mailhop.org ([63.208.196.178]:51689 "EHLO mho-01-bos.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752219AbZBTQZD (ORCPT ); Fri, 20 Feb 2009 11:25:03 -0500 Content-Disposition: inline In-Reply-To: <20090206222255.GJ10721@atomide.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Koen Kooi Cc: "linux-omap@vger.kernel.org List" * Tony Lindgren [090206 14:56]: > * Koen Kooi [090206 06:16]: > > > > Op 4 feb 2009, om 20:58 heeft Koen Kooi het volgende geschreven: > > > >> > >> Op 25 jan 2009, om 13:04 heeft David Brownell het volgende geschreven: > >> > >>> On Sunday 25 January 2009, Koen Kooi wrote: > >>>> From: Koen Kooi > >>>> > >>>> Changing it do 100kHz is needed to make more devices works > >>>> properly. Controlling the TI DLP Pico projector[1] doesn't work > >>>> properly at 400kHz, 100kHz and lower work fine. EDID readout is > >>>> unaffected by this change. > >>>> > >>>> [1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234 > >>>> > >>>> Signed-off-by: Koen Kooi > >>> > >>> Acked-by: David Brownell > >> > >> ping > > > > Any more changes needed before this can go in? > > Just few more days, I'll need to get my upstream queues ready.. > Otherwise I'll forget to apply it somewhere :) OK, adding to omap-fixes and pushing to linux-omap. Tony