* [OMAPZOOM][PATCH] ISP: Add default white balance values to board file.
@ 2009-02-27 0:09 Dominic Curran
0 siblings, 0 replies; only message in thread
From: Dominic Curran @ 2009-02-27 0:09 UTC (permalink / raw)
To: linux-omap
From: Dominic Curran <dcurran@ti.com>
Subject: [OMAPZOOM][PATCH] ISP: Add default white balance values to board file.
This patch stores the sensors default white balance coefficient values in the
board file.
This patch keeps the same coef for MT9P012 & OV3640, but changes the coefficients
for the IMX046.
Changing the coefficients for the IMX046 fixes a yellowish tint in the image.
The patch is based on top of the set of patches labeled 'Component Order'.
Signed-off-by: Dominic Curran <dcurran@ti.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 12 ++++++++++++
arch/arm/mach-omap2/board-ldp.c | 4 ++++
arch/arm/mach-omap2/board-zoom2.c | 4 ++++
drivers/media/video/isp/isp.c | 1 +
drivers/media/video/isp/isp.h | 3 +++
drivers/media/video/isp/isppreview.c | 18 ++++++++++++++++++
drivers/media/video/isp/isppreview.h | 2 ++
7 files changed, 44 insertions(+)
Index: omapzoom04/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-3430sdp.c
+++ omapzoom04/arch/arm/mach-omap2/board-3430sdp.c
@@ -660,6 +660,10 @@ static struct isp_interface_config mt9p0
.wenlog = ISPCCDC_CFG_WENLOG_OR,
.dcsub = 42,
.raw_fmt_in = ISPCCDC_INPUT_FMT_GR_BG,
+ .wbal.coef0 = 0x23,
+ .wbal.coef1 = 0x20,
+ .wbal.coef2 = 0x20,
+ .wbal.coef3 = 0x30,
.u.par.par_bridge = 0x0,
.u.par.par_clk_pol = 0x0,
};
@@ -783,6 +787,10 @@ static struct isp_interface_config ov364
.wenlog = ISPCCDC_CFG_WENLOG_AND,
.dcsub = OV3640_BLACK_LEVEL_10BIT,
.raw_fmt_in = ISPCCDC_INPUT_FMT_BG_GR,
+ .wbal.coef0 = 0x23,
+ .wbal.coef1 = 0x20,
+ .wbal.coef2 = 0x20,
+ .wbal.coef3 = 0x30,
.u.csi.crc = 0x0,
.u.csi.mode = 0x0,
.u.csi.edge = 0x0,
@@ -991,6 +999,10 @@ static struct isp_interface_config imx04
.wenlog = ISPCCDC_CFG_WENLOG_OR,
.dcsub = IMX046_BLACK_LEVEL_AVG,
.raw_fmt_in = ISPCCDC_INPUT_FMT_RG_GB,
+ .wbal.coef0 = 0x23,
+ .wbal.coef1 = 0x20,
+ .wbal.coef2 = 0x20,
+ .wbal.coef3 = 0x39,
.u.csi.crc = 0x0,
.u.csi.mode = 0x0,
.u.csi.edge = 0x0,
Index: omapzoom04/arch/arm/mach-omap2/board-ldp.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-ldp.c
+++ omapzoom04/arch/arm/mach-omap2/board-ldp.c
@@ -625,6 +625,10 @@ static struct isp_interface_config ov364
.wenlog = ISPCCDC_CFG_WENLOG_AND,
.dcsub = OV3640_BLACK_LEVEL_10BIT,
.raw_fmt_in = ISPCCDC_INPUT_FMT_BG_GR,
+ .wbal.coef0 = 0x23,
+ .wbal.coef1 = 0x20,
+ .wbal.coef2 = 0x20,
+ .wbal.coef3 = 0x30,
.u.csi.crc = 0x0,
.u.csi.mode = 0x0,
.u.csi.edge = 0x0,
Index: omapzoom04/arch/arm/mach-omap2/board-zoom2.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-zoom2.c
+++ omapzoom04/arch/arm/mach-omap2/board-zoom2.c
@@ -371,6 +371,10 @@ static struct isp_interface_config imx04
.wenlog = ISPCCDC_CFG_WENLOG_OR,
.dcsub = IMX046_BLACK_LEVEL_AVG,
.raw_fmt_in = ISPCCDC_INPUT_FMT_RG_GB,
+ .wbal.coef0 = 0x23,
+ .wbal.coef1 = 0x20,
+ .wbal.coef2 = 0x20,
+ .wbal.coef3 = 0x39,
.u.csi.crc = 0x0,
.u.csi.mode = 0x0,
.u.csi.edge = 0x0,
Index: omapzoom04/drivers/media/video/isp/isp.c
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isp.c
+++ omapzoom04/drivers/media/video/isp/isp.c
@@ -952,6 +952,7 @@ int isp_configure_interface(struct isp_i
ispccdc_set_wenlog(config->wenlog);
ispccdc_set_dcsub(config->dcsub);
ispccdc_set_crop_offset(config->raw_fmt_in);
+ isppreview_set_whitebalance(&config->wbal);
return 0;
}
Index: omapzoom04/drivers/media/video/isp/isp.h
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isp.h
+++ omapzoom04/drivers/media/video/isp/isp.h
@@ -27,6 +27,8 @@
#include <media/videobuf-dma-sg.h>
#include <linux/videodev2.h>
+#include <mach/isp_user.h>
+
#include "ispmmu.h"
#define OMAP_ISP_CCDC (1 << 0)
@@ -205,6 +207,7 @@ struct isp_interface_config {
u32 wenlog;
u32 dcsub;
enum ispccdc_raw_fmt raw_fmt_in;
+ struct ispprev_wbal wbal;
union {
struct par {
unsigned par_bridge:2;
Index: omapzoom04/drivers/media/video/isp/isppreview.c
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isppreview.c
+++ omapzoom04/drivers/media/video/isp/isppreview.c
@@ -1253,6 +1253,24 @@ void isppreview_enable_chroma_suppressio
EXPORT_SYMBOL(isppreview_enable_chroma_suppression);
/**
+ * isppreview_set_whitebalance - Change the White Balance parameters.
+ * @prev_wbal: Pointer to structure containing the digital gain and
+ * white balance coefficient.
+ *
+ * Store and set the Coefficient matrix.
+ **/
+void isppreview_set_whitebalance(struct ispprev_wbal *wbal)
+{
+ params->wbal.coef0 = wbal->coef0;
+ params->wbal.coef1 = wbal->coef1;
+ params->wbal.coef2 = wbal->coef2;
+ params->wbal.coef3 = wbal->coef3;
+
+ isppreview_config_whitebalance(params->wbal);
+}
+EXPORT_SYMBOL(isppreview_set_whitebalance);
+
+/**
* isppreview_config_whitebalance - Configures the White Balance parameters.
* @prev_wbal: Structure containing the digital gain and white balance
* coefficient.
Index: omapzoom04/drivers/media/video/isp/isppreview.h
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isppreview.h
+++ omapzoom04/drivers/media/video/isp/isppreview.h
@@ -359,4 +359,6 @@ int omap34xx_isp_tables_update(struct is
void isppreview_set_skip(u32 h, u32 v);
+void isppreview_set_whitebalance(struct ispprev_wbal *wbal);
+
#endif/* OMAP_ISP_PREVIEW_H */
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-27 0:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-27 0:09 [OMAPZOOM][PATCH] ISP: Add default white balance values to board file Dominic Curran
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox