From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.arm.linux.org.uk
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 09/13] ARM: OMAP: No need to include board-h4.h from hardware.h
Date: Thu, 26 Feb 2009 16:03:49 -0800 [thread overview]
Message-ID: <20090227000349.20192.48414.stgit@localhost> (raw)
In-Reply-To: <20090226235042.20192.38338.stgit@localhost>
Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-h4.c | 4 ++-
arch/arm/plat-omap/include/mach/board-h4.h | 38 ----------------------------
arch/arm/plat-omap/include/mach/hardware.h | 4 ---
3 files changed, 3 insertions(+), 43 deletions(-)
delete mode 100644 arch/arm/plat-omap/include/mach/board-h4.h
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5e9b146..7122697 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -47,6 +47,8 @@
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
+#define H4_ETHR_GPIO_IRQ 92
+
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
@@ -341,7 +343,7 @@ static inline void __init h4_init_debug(void)
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);
- if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+ if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
out:
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
deleted file mode 100644
index 7c3fa0f..0000000
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-h4.h
- *
- * Hardware definitions for TI OMAP2420 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* MMC Prototypes */
-extern void h4_mmc_init(void);
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ 92
-#endif /* __ASM_ARCH_OMAP_H4_H */
-
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 26f14f7..85f02b6 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -294,10 +294,6 @@
* ---------------------------------------------------------------------------
*/
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
#ifdef CONFIG_MACH_OMAP3_BEAGLE
#include "board-omap3beagle.h"
#endif
next prev parent reply other threads:[~2009-02-27 0:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-26 23:52 [PATCH 00/13] Omap header clean-up for next merge window Tony Lindgren
2009-02-26 23:53 ` [PATCH 01/13] ARM: OMAP: No need to include board-perseus2.h or board-fsample.h from hardware.h Tony Lindgren
2009-02-26 23:54 ` [PATCH 02/13] ARM: OMAP: No need to include board-h2.h " Tony Lindgren
2009-02-26 23:56 ` [PATCH 03/13] ARM: OMAP: No need to include board-h3.h " Tony Lindgren
2009-02-26 23:57 ` [PATCH 04/13] ARM: OMAP: No need to include board-innovator.h " Tony Lindgren
2009-02-26 23:58 ` [PATCH 05/13] ARM: OMAP: No need to include board-osk.h " Tony Lindgren
2009-02-26 23:59 ` [PATCH 06/13] ARM: OMAP: No need to include board-palm*.h " Tony Lindgren
2009-02-27 0:01 ` [PATCH 07/13] ARM: OMAP: No need to include board-omap2430sdp.h " Tony Lindgren
2009-02-27 0:13 ` Felipe Balbi
2009-02-27 3:11 ` Tony Lindgren
2009-02-27 0:02 ` [PATCH 08/13] ARM: OMAP: No need to include board-apollon.h " Tony Lindgren
2009-02-27 0:03 ` Tony Lindgren [this message]
2009-02-27 0:05 ` [PATCH 10/13] ARM: OMAP: No need to include board-ldp.h " Tony Lindgren
2009-02-27 0:06 ` [PATCH 11/13] ARM: OMAP: No need to include board-overo.h " Tony Lindgren
2009-02-27 0:07 ` [PATCH 12/13] ARM: OMAP: No need to include board-nokia.h " Tony Lindgren
2009-02-27 0:08 ` [PATCH 13/13] ARM: OMAP: Remove remaining board-*.h includes " Tony Lindgren
2009-02-27 20:11 ` [PATCH 00/13] Omap header clean-up for next merge window Russell King - ARM Linux
2009-03-04 17:53 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090227000349.20192.48414.stgit@localhost \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox