From: David Brownell <david-b@pacbell.net>
To: OMAP <linux-omap@vger.kernel.org>
Subject: [patch 2.6.29-rc7-omap 3/5] regulator: twl4030 voltage enumeration cleanup
Date: Wed, 11 Mar 2009 04:22:26 -0800 [thread overview]
Message-ID: <200903110522.26844.david-b@pacbell.net> (raw)
In-Reply-To: <200903110518.34945.david-b@pacbell.net>
From: David Brownell <dbrownell@users.sourceforge.net>
Subject: regulator: twl4030 voltage enumeration (v2) cleanups
Minor cleanups to the twl403 regulator driver, mostly enabled
by other recent changes: comments, shrink memory usage, add
definition for one bit.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
drivers/regulator/twl4030-regulator.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/regulator/twl4030-regulator.c
+++ b/drivers/regulator/twl4030-regulator.c
@@ -36,13 +36,13 @@ struct twlreg_info {
/* twl4030 resource ID, for resource control state machine */
u8 id;
+ /* FIXED_LDO voltage */
+ u8 deciV;
+
/* voltage in mV = table[VSEL]; table_len must be a power-of-two */
u8 table_len;
const u16 *table;
- /* chip constraints on regulator behavior */
- u16 min_mV;
-
/* used by regulator core */
struct regulator_desc desc;
};
@@ -97,6 +97,7 @@ static int twl4030reg_grp(struct regulat
#define P3_GRP BIT(7) /* "peripherals" */
#define P2_GRP BIT(6) /* secondary processor, modem, etc */
#define P1_GRP BIT(5) /* CPU/Linux */
+#define WARM_CFG BIT(4)
static int twl4030reg_is_enabled(struct regulator_dev *rdev)
{
@@ -329,14 +330,14 @@ static int twl4030fixed_list_voltage(str
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
- return info->min_mV * 1000;
+ return info->deciV * 100 * 1000;
}
static int twl4030fixed_get_voltage(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
- return info->min_mV * 1000;
+ return info->deciV * 100 * 1000;
}
static struct regulator_ops twl4030fixed_ops = {
@@ -373,7 +374,7 @@ static struct regulator_ops twl4030fixed
#define TWL_FIXED_LDO(label, offset, mVolts, num) { \
.base = offset, \
.id = num, \
- .min_mV = mVolts, \
+ .deciV = mVolts / 100 , \
.desc = { \
.name = #label, \
.id = TWL4030_REG_##label, \
@@ -385,7 +386,7 @@ static struct regulator_ops twl4030fixed
}
/*
- * We list regulators here if systems need some level of
+ * We expose regulators here if systems need some level of
* software control over them after boot.
*/
static struct twlreg_info twl4030_regs[] = {
@@ -439,6 +440,7 @@ static int twl4030reg_probe(struct platf
/* Constrain board-specific capabilities according to what
* this driver and the chip itself can actually do.
+ * (Regulator core now does this for voltage constraints.)
*/
c = &initdata->constraints;
c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
next prev parent reply other threads:[~2009-03-11 12:32 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-11 12:18 [patch 2.6.29-rc7-omap 0/5] mmc-twl4030 loses twl4030-dependency David Brownell
2009-03-11 12:20 ` [patch 2.6.29-rc7-omap 1/5] regulator: enumerate voltages David Brownell
2009-03-11 16:09 ` [APPLIED] regulator: enumerate voltages (v2) Tony Lindgren
2009-03-11 12:21 ` [patch 2.6.29-rc7-omap 2/5] regulator: twl4030 voltage enumeration David Brownell
2009-03-11 16:09 ` [APPLIED] regulator: twl4030 voltage enumeration (v2) Tony Lindgren
2009-03-11 12:22 ` David Brownell [this message]
2009-03-11 16:09 ` [APPLIED] regulator: twl4030 voltage enumeration (v2) cleanups Tony Lindgren
2009-03-11 12:23 ` [patch 2.6.29-rc7-omap 4/5] MMC: regulator utilities David Brownell
2009-03-11 16:09 ` [APPLIED] " Tony Lindgren
2009-03-11 12:24 ` [patch 2.6.29-rc7-omap 5/5] mmc-twl4030 uses regulator framework David Brownell
2009-03-11 16:09 ` [APPLIED] " Tony Lindgren
2009-03-12 8:57 ` [patch 2.6.29-rc7-omap 5/5] " Adrian Hunter
2009-03-12 9:22 ` David Brownell
2009-03-16 14:44 ` Adrian Hunter
2009-03-16 19:33 ` David Brownell
2009-03-17 6:38 ` Adrian Hunter
2009-03-17 7:07 ` David Brownell
2009-03-17 7:12 ` Adrian Hunter
2009-03-17 10:25 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903110522.26844.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox