From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: [PATCH 08/11] ARM: OMAP2/3: GPIO: do not attempt to wake-enable Date: Tue, 14 Apr 2009 14:58:26 -0700 Message-ID: <20090414215826.9878.86819.stgit@localhost> References: <20090414214638.9878.17987.stgit@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from mho-01-ewr.mailhop.org ([204.13.248.71]:63870 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753386AbZDNV6c (ORCPT ); Tue, 14 Apr 2009 17:58:32 -0400 In-Reply-To: <20090414214638.9878.17987.stgit@localhost> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-arm-kernel@lists.arm.linux.org.uk Cc: Kevin Hilman , linux-omap@vger.kernel.org From: Kevin Hilman The GPIO IRQ enable/disable path attempts to also enable IRQ wake support for the parent GPIO bank IRQ as well. However, since there is no 'set_wake' hook for the bank IRQs, these calls will always fail. Also, since the enable will fail on the suspend path, the disable on the resume path will trigger unbalanced enable/disable warnings. This was discovered in the suspend/resume path on OMAP3/Beagle using the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the suspend/resume path. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 14 ++++---------- 1 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e..210a1c0 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -921,13 +921,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +937,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif