From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org
Cc: Paul Walmsley <paul@pwsan.com>
Subject: [PATCH 1/2] I2C: OMAP: use consolidated flags field rather than bitfields
Date: Sat, 25 Apr 2009 22:28:10 -0600 [thread overview]
Message-ID: <20090426042805.31316.29817.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090426042504.31316.68357.stgit@localhost.localdomain>
Convert existing flag usage in the i2c-omap.c driver to use a 'flags' u8
rather than bitfields. Define static inline functions to set and clear
these flags.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
drivers/i2c/busses/i2c-omap.c | 51 +++++++++++++++++++++++++++--------------
1 files changed, 33 insertions(+), 18 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 9919c08..387a2d3 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -26,6 +26,9 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * To do:
+ * - Add DMA support for large reads/writes
*/
#include <linux/module.h>
@@ -157,6 +160,10 @@
#define SYSC_CLOCKACTIVITY_FCLK 0x2
+/* omap_i2c_dev.flags */
+#define OMAP_I2C_BAD_HW (1 << 0) /* bad hardware */
+#define OMAP_I2C_IDLE (1 << 1) /* device clocks off */
+
struct omap_i2c_dev {
struct device *dev;
void __iomem *base; /* virtual */
@@ -166,18 +173,17 @@ struct omap_i2c_dev {
struct completion cmd_complete;
struct resource *ioarea;
u32 speed; /* Speed of bus in Khz */
- u16 cmd_err;
u8 *buf;
size_t buf_len;
struct i2c_adapter adapter;
+ u16 cmd_err;
+ u16 iestate; /* Saved interrupt register */
u8 fifo_size; /* use as flag and value
* fifo_size==0 implies no fifo
* if set, should be trsh+1
*/
u8 rev;
- unsigned b_hw:1; /* bad h/w fixes */
- unsigned idle:1;
- u16 iestate; /* Saved interrupt register */
+ u8 flags;
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -191,6 +197,17 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
return __raw_readw(i2c_dev->base + reg);
}
+static inline void omap_i2c_set_flag(struct omap_i2c_dev *i2c_dev, u8 flag_mask)
+{
+ i2c_dev->flags |= flag_mask;
+}
+
+static inline void omap_i2c_clear_flag(struct omap_i2c_dev *i2c_dev,
+ u8 flag_mask)
+{
+ i2c_dev->flags &= ~flag_mask;
+}
+
static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
{
int ret;
@@ -226,32 +243,30 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
- WARN_ON(!dev->idle);
+ WARN_ON(!(dev->flags & OMAP_I2C_IDLE));
clk_enable(dev->iclk);
clk_enable(dev->fclk);
- dev->idle = 0;
+ omap_i2c_clear_flag(dev, OMAP_I2C_IDLE);
if (dev->iestate)
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
}
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
- u16 iv;
-
- WARN_ON(dev->idle);
+ WARN_ON(dev->flags & OMAP_I2C_IDLE);
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
if (dev->rev < OMAP_I2C_REV_2) {
- iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+ omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
- /* Flush posted write before the dev->idle store occurs */
+ /* Flush posted write before setting the idle flag */
omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
}
- dev->idle = 1;
+ omap_i2c_set_flag(dev, OMAP_I2C_IDLE);
clk_disable(dev->fclk);
clk_disable(dev->iclk);
}
@@ -455,7 +470,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
if (!(msg->flags & I2C_M_RD))
w |= OMAP_I2C_CON_TRX;
- if (!dev->b_hw && stop)
+ if (!(dev->flags & OMAP_I2C_BAD_HW) && stop)
w |= OMAP_I2C_CON_STP;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
@@ -463,7 +478,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
/*
* Don't write stt and stp together on some hardware.
*/
- if (dev->b_hw && stop) {
+ if ((dev->flags & OMAP_I2C_BAD_HW) && stop) {
unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
while (con & OMAP_I2C_CON_STT) {
@@ -580,7 +595,7 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
- if (dev->idle)
+ if (dev->flags & OMAP_I2C_IDLE)
return IRQ_NONE;
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
@@ -640,7 +655,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 stat, w;
int err, count = 0;
- if (dev->idle)
+ if (dev->flags & OMAP_I2C_IDLE)
return IRQ_NONE;
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -806,7 +821,7 @@ omap_i2c_probe(struct platform_device *pdev)
speed = 100; /* Defualt speed */
dev->speed = speed;
- dev->idle = 1;
+ omap_i2c_set_flag(dev, OMAP_I2C_IDLE);
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, mem->end - mem->start + 1);
@@ -837,7 +852,7 @@ omap_i2c_probe(struct platform_device *pdev)
* call back latencies.
*/
dev->fifo_size = (dev->fifo_size / 2);
- dev->b_hw = 1; /* Enable hardware fixes */
+ omap_i2c_set_flag(dev, OMAP_I2C_BAD_HW); /* Enable hw fixes */
}
/* reset ASAP, clearing any IRQs */
next prev parent reply other threads:[~2009-04-26 4:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-26 4:28 [PATCH 0/2] I2C: OMAP: spurious IRQ fixes Paul Walmsley
2009-04-26 4:28 ` Paul Walmsley [this message]
2009-04-26 4:28 ` [PATCH 2/2] I2C: OMAP: overhaul the rev2+ interrupt service routine and omap_i2c_xfer_msg() Paul Walmsley
2009-04-27 11:56 ` [PATCH 0/2] I2C: OMAP: spurious IRQ fixes Aaro Koskinen
2009-05-11 7:29 ` Paul Walmsley
2009-05-12 17:14 ` Woodruff, Richard
2009-05-12 18:33 ` Paul Walmsley
2009-05-12 18:41 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090426042805.31316.29817.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox