From: Tony Lindgren <tony@atomide.com>
To: dedekind@infradead.org, linux-omap@vger.kernel.org,
adrian.hunter@nokia.com
Subject: [PATCH 3/4] onenand init: Rename n800_* functions to gpmc_onenand_* functions
Date: Wed, 29 Apr 2009 14:50:25 -0700 [thread overview]
Message-ID: <20090429215025.13138.70543.stgit@localhost> (raw)
In-Reply-To: <20090429214900.13138.54584.stgit@localhost>
Rename n800_* functions to gpmc_onenand_* functions
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/board-n800.c | 2 +-
arch/arm/mach-omap2/board-rx51-flash.c | 21 -------------------
arch/arm/mach-omap2/board-rx51.c | 4 ++--
arch/arm/mach-omap2/gpmc-onenand.c | 32 +++++++++++++++--------------
arch/arm/plat-omap/include/mach/onenand.h | 12 +++++++++++
6 files changed, 31 insertions(+), 41 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-rx51-flash.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 9cb2662..d35996d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -62,7 +62,6 @@ obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o \
board-n800-camera.o
obj-$(CONFIG_MACH_NOKIA_N810) += board-n810.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
- board-rx51-flash.o \
board-rx51-sdram.o \
board-rx51-video.o \
board-rx51-peripherals.o \
diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
index f1552f0..3d0a83b 100644
--- a/arch/arm/mach-omap2/board-n800.c
+++ b/arch/arm/mach-omap2/board-n800.c
@@ -689,7 +689,7 @@ void __init nokia_n800_common_init(void)
{
platform_add_devices(n800_devices, ARRAY_SIZE(n800_devices));
- n800_flash_init();
+ gpmc_onenand_init();
n800_mmc_init();
n800_bt_init();
n800_dsp_init();
diff --git a/arch/arm/mach-omap2/board-rx51-flash.c b/arch/arm/mach-omap2/board-rx51-flash.c
deleted file mode 100644
index f3b7eaf..0000000
--- a/arch/arm/mach-omap2/board-rx51-flash.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
- *
- * Copyright (C) 2008 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <mach/board-rx51.h>
-
-extern void __init n800_flash_init(void);
-
-void __init rx51_flash_init(void)
-{
- n800_flash_init();
-}
-
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index c800b24..20a2470 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -30,6 +30,7 @@
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
+#include <mach/onenand.h>
#include <mach/board-rx51.h>
static struct omap_uart_config rx51_uart_config = {
@@ -67,7 +68,6 @@ static void __init rx51_init_irq(void)
omap_gpio_init();
}
-extern void __init rx51_flash_init(void);
extern void __init rx51_peripherals_init(void);
extern void __init rx51_video_init(void);
@@ -77,7 +77,7 @@ static void __init rx51_init(void)
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap_serial_init();
usb_musb_init();
- rx51_flash_init();
+ gpmc_onenand_init();
rx51_peripherals_init();
rx51_video_init();
}
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 52aaf76..96f9358 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -19,22 +19,22 @@
#include <mach/board.h>
#include <mach/gpmc.h>
-struct mtd_partition n800_partitions[ONENAND_MAX_PARTITIONS];
+struct mtd_partition gpmc_onenand_partitions[ONENAND_MAX_PARTITIONS];
-int n800_onenand_setup(void __iomem *, int freq);
+int gpmc_onenand_setup(void __iomem *, int freq);
-static struct omap_onenand_platform_data n800_onenand_data = {
+static struct omap_onenand_platform_data gpmc_onenand_data = {
.cs = 0,
- .parts = n800_partitions,
+ .parts = gpmc_onenand_partitions,
.nr_parts = 0, /* filled later */
- .onenand_setup = n800_onenand_setup,
+ .onenand_setup = gpmc_onenand_setup,
};
-static struct platform_device n800_onenand_device = {
+static struct platform_device gpmc_onenand_device = {
.name = "omap2-onenand",
.id = -1,
.dev = {
- .platform_data = &n800_onenand_data,
+ .platform_data = &gpmc_onenand_data,
},
};
@@ -305,10 +305,10 @@ static int omap2_onenand_set_sync_mode(int cs, void __iomem *onenand_base,
return 0;
}
-int n800_onenand_setup(void __iomem *onenand_base, int freq)
+int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
{
- struct omap_onenand_platform_data *datap = &n800_onenand_data;
- struct device *dev = &n800_onenand_device.dev;
+ struct omap_onenand_platform_data *datap = &gpmc_onenand_data;
+ struct device *dev = &gpmc_onenand_device.dev;
/* Set sync timings in GPMC */
if (omap2_onenand_set_sync_mode(datap->cs, onenand_base, freq) < 0) {
@@ -319,30 +319,30 @@ int n800_onenand_setup(void __iomem *onenand_base, int freq)
return 0;
}
-void __init n800_flash_init(void)
+void __init gpmc_flash_init(void)
{
const struct omap_partition_config *part;
int i = 0;
- n800_onenand_data.gpio_irq = cpu_is_omap34xx() ? 65 : 26;
+ gpmc_onenand_data.gpio_irq = cpu_is_omap34xx() ? 65 : 26;
while ((part = omap_get_nr_config(OMAP_TAG_PARTITION,
struct omap_partition_config, i)) != NULL) {
struct mtd_partition *mpart;
- mpart = n800_partitions + i;
+ mpart = gpmc_onenand_partitions + i;
mpart->name = (char *) part->name;
mpart->size = part->size;
mpart->offset = part->offset;
mpart->mask_flags = part->mask_flags;
i++;
- if (i == ARRAY_SIZE(n800_partitions)) {
+ if (i == ARRAY_SIZE(gpmc_onenand_partitions)) {
printk(KERN_ERR "Too many partitions supplied\n");
return;
}
}
- n800_onenand_data.nr_parts = i;
- if (platform_device_register(&n800_onenand_device) < 0) {
+ gpmc_onenand_data.nr_parts = i;
+ if (platform_device_register(&gpmc_onenand_device) < 0) {
printk(KERN_ERR "Unable to register OneNAND device\n");
return;
}
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d30..f97cf55 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -23,3 +23,15 @@ struct omap_onenand_platform_data {
int omap2_onenand_rephase(void);
#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+
+extern void gpmc_onenand_init(void);
+
+#else
+
+static inline void gpmc_onenand_init(void)
+{
+}
+
+#endif
next prev parent reply other threads:[~2009-04-29 21:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-29 21:49 [PATCH 0/4] Generic gpmc-onenand initialization, v2 Tony Lindgren
2009-04-29 21:50 ` [PATCH 1/4] onenand init: Rename board-n800-flash.c to gpmc-onenand.c Tony Lindgren
2009-04-29 21:50 ` [PATCH 2/4] onenand init: Build gpmc-onenand.o based on CONFIG_MTD_ONENAND_OMAP2 Tony Lindgren
2009-04-29 21:50 ` Tony Lindgren [this message]
2009-04-29 21:50 ` [PATCH 4/4] onenand init: Pass configuration data from board-*.c files Tony Lindgren
2009-04-29 21:54 ` [PATCH 5/4] onenand init: Debug patch to print out the onenand partitions from bootloader Tony Lindgren
2009-04-30 5:53 ` [PATCH 4/4] onenand init: Pass configuration data from board-*.c files Adrian Hunter
2009-04-30 14:01 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090429215025.13138.70543.stgit@localhost \
--to=tony@atomide.com \
--cc=adrian.hunter@nokia.com \
--cc=dedekind@infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox