From: Tony Lindgren <tony@atomide.com>
To: Kevin Hilman <khilman@deeprootsystems.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH 2/2] OMAP2/3: PM: remove /sys/power/clocks_off_while_idle
Date: Tue, 19 May 2009 10:16:29 -0700 [thread overview]
Message-ID: <20090519171629.GB19742@atomide.com> (raw)
In-Reply-To: <1242753264-12600-3-git-send-email-khilman@deeprootsystems.com>
* Kevin Hilman <khilman@deeprootsystems.com> [090519 10:15]:
> The sysfs control /sys/power/clocks_off_while_idle only affects
> the UART clocks. And these can now be controlled with a UART
> specific timeout sysfs control. The system default behavior
> is to have the equivalent of clocks_off_while_idle == 1 and
> a UART inactivity timeout of 5 seconds.
>
> Now one can use
>
> /sys/devices/platform/serial8250.<uart>/sleep_timeout
>
> to set the inactivity timer for the UART in seconds. Setting
> this value to zero disables the timout and is the equivalent
> of doing an
>
> echo 0 > /sys/power/clocks_off_while_idle
Sounds like a nice improvment to me!
Tony
>
> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
> ---
> arch/arm/mach-omap2/pm.c | 12 ------------
> arch/arm/mach-omap2/pm.h | 1 -
> arch/arm/mach-omap2/serial.c | 3 ---
> 3 files changed, 0 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
> index 58ed520..8633f86 100644
> --- a/arch/arm/mach-omap2/pm.c
> +++ b/arch/arm/mach-omap2/pm.c
> @@ -39,7 +39,6 @@
> #include "pm.h"
>
> unsigned short enable_dyn_sleep;
> -unsigned short clocks_off_while_idle;
> unsigned short enable_off_mode;
> unsigned short voltage_off_while_idle;
> unsigned short wakeup_timer_seconds;
> @@ -52,9 +51,6 @@ static ssize_t idle_store(struct kobject *k, struct kobj_attribute *,
> static struct kobj_attribute sleep_while_idle_attr =
> __ATTR(sleep_while_idle, 0644, idle_show, idle_store);
>
> -static struct kobj_attribute clocks_off_while_idle_attr =
> - __ATTR(clocks_off_while_idle, 0644, idle_show, idle_store);
> -
> static struct kobj_attribute enable_off_mode_attr =
> __ATTR(enable_off_mode, 0644, idle_show, idle_store);
>
> @@ -85,8 +81,6 @@ static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
> {
> if (attr == &sleep_while_idle_attr)
> return sprintf(buf, "%hu\n", enable_dyn_sleep);
> - else if (attr == &clocks_off_while_idle_attr)
> - return sprintf(buf, "%hu\n", clocks_off_while_idle);
> else if (attr == &enable_off_mode_attr)
> return sprintf(buf, "%hu\n", enable_off_mode);
> else if (attr == &voltage_off_while_idle_attr)
> @@ -109,8 +103,6 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
>
> if (attr == &sleep_while_idle_attr) {
> enable_dyn_sleep = value;
> - } else if (attr == &clocks_off_while_idle_attr) {
> - clocks_off_while_idle = value;
> } else if (attr == &enable_off_mode_attr) {
> enable_off_mode = value;
> omap3_pm_off_mode_enable(enable_off_mode);
> @@ -255,10 +247,6 @@ static int __init omap_pm_init(void)
> if (error)
> printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
> error = sysfs_create_file(power_kobj,
> - &clocks_off_while_idle_attr.attr);
> - if (error)
> - printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
> - error = sysfs_create_file(power_kobj,
> &enable_off_mode_attr.attr);
> if (error) {
> printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index e523d75..2547e1b 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -24,7 +24,6 @@ static inline int omap3_idle_init(void) { return 0; }
> #endif
>
> extern unsigned short enable_dyn_sleep;
> -extern unsigned short clocks_off_while_idle;
> extern unsigned short enable_off_mode;
> extern unsigned short voltage_off_while_idle;
> extern atomic_t sleep_block;
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index c9059fd..8c27700 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -263,9 +263,6 @@ void omap_uart_prepare_idle(int num)
> struct omap_uart_state *uart;
>
> list_for_each_entry(uart, &uart_list, node) {
> - if (!clocks_off_while_idle)
> - continue;
> -
> if (num == uart->num && uart->can_sleep) {
> omap_uart_disable_clocks(uart);
> return;
> --
> 1.6.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-05-19 17:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-19 17:14 [PATCH 0/2] PM: drop clocks_off_while_idle Kevin Hilman
2009-05-19 17:14 ` [PATCH 1/2] OMAP: PM: UART: zero sleep_timeout will disable timeout feature Kevin Hilman
2009-05-19 17:14 ` [PATCH 2/2] OMAP2/3: PM: remove /sys/power/clocks_off_while_idle Kevin Hilman
2009-05-19 17:16 ` Tony Lindgren [this message]
2009-05-19 22:40 ` [PATCH 0/2] PM: drop clocks_off_while_idle Woodruff, Richard
2009-05-19 22:58 ` Kevin Hilman
2009-05-20 16:12 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090519171629.GB19742@atomide.com \
--to=tony@atomide.com \
--cc=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox