[PATCH 0/6] Updates for omap3 for merge window after 2.6.30

[PATCH 0/6] Updates for omap3 for merge window after 2.6.30

[Tony Lindgren]

Hi all,

Here are mostly omap3 specific updates for the coming merge window
for review. Still to come few more boards and regulator framework
changes for omap3 in one more series.

Regards,

Tony

---

Imre Deak (1):
      ARM: OMAP3: ZOOM MDK: Add FB support to board file

Paul Walmsley (2):
      ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6
      ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6

Tony Lindgren (2):
      ARM: OMAP3: Initialize more devices for LDP
      ARM: OMAP2/3: Remove L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE

Vikram Pandita (1):
      ARM: OMAP2/3: Serial: Remove arch_initcall dependency


 arch/arm/mach-omap2/board-3430sdp.c                |    3 
 arch/arm/mach-omap2/board-ldp.c                    |  219 ++++++++++++++++++++
 arch/arm/mach-omap2/board-omap3beagle.c            |    4 
 arch/arm/mach-omap2/board-omap3pandora.c           |    3 
 arch/arm/mach-omap2/board-overo.c                  |    3 
 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h  |   69 ++++++
 .../mach-omap2/sdram-qimonda-hyb18m512160af-6.h    |   54 +++++
 arch/arm/mach-omap2/serial.c                       |   22 +-
 arch/arm/plat-omap/include/mach/keypad.h           |    4 
 arch/arm/plat-omap/include/mach/omap34xx.h         |    4 
 10 files changed, 361 insertions(+), 24 deletions(-)
 create mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
 create mode 100644 arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h

-- 
Signature

[PATCH 1/6] ARM: OMAP2/3: Remove L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE

[Tony Lindgren]

These are not being used right now, and the processor specific
defines should be used instead by any code accessing these registers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/omap34xx.h |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index cc25733..f8d186a 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
 
 #define L4_34XX_BASE		0x48000000
 #define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
 #define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
 #define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
 #define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
 
 #define OMAP3430_32KSYNCT_BASE	0x48320000
 #define OMAP3430_CM_BASE	0x48004800

[PATCH 2/6] ARM: OMAP2/3: Serial: Remove arch_initcall dependency

[Tony Lindgren]

From: Vikram Pandita <vikram.pandita@ti.com>

Move platform_device_register() for serial device to
omap_serial_init()

There is no need to have arch_initcall() dependency in serial
as already board files call the function omap_serial_init()

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/serial.c |   22 +++++++++-------------
 1 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c..3c2d325 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -98,6 +98,14 @@ void omap_serial_enable_clocks(int enable)
 	}
 }
 
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
 void __init omap_serial_init(void)
 {
 	int i;
@@ -142,18 +150,6 @@ void __init omap_serial_init(void)
 
 		omap_serial_reset(p);
 	}
-}
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static int __init omap_init(void)
-{
-	return platform_device_register(&serial_device);
+	platform_device_register(&serial_device);
 }
-arch_initcall(omap_init);

[PATCH 3/6] ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6

[Tony Lindgren]

From: Paul Walmsley <paul@pwsan.com>

Add timing data for the Micron MT46H32M32LF-6 SDRAM chip, used on the
OMAP3 Beagle and EVM boards.  Original timing data is from the Micron
datasheet PDF downloaded from:

http://download.micron.com/pdf/datasheets/dram/mobile/1gb_ddr_mobile_sdram_t48m.pdf

Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
the chips used on Beagle & OMAP3EVM.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c           |    4 +
 arch/arm/mach-omap2/board-omap3pandora.c          |    3 +
 arch/arm/mach-omap2/board-overo.c                 |    3 +
 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h |   69 +++++++++++++++++++++
 4 files changed, 76 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d..f25082c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -105,6 +105,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -185,7 +187,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c..3571bb4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -36,6 +36,7 @@
 #include <mach/mcspi.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
@@ -118,7 +119,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23be..c7443ff 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -45,6 +45,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -303,7 +304,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 0000000..b6c1db3
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,69 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 133333333,
+		.actim_ctrla = 0x7a19b485,
+		.actim_ctrlb = 0x00011213,
+		.rfr_ctrl    = 0x0003de01,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[5] = {
+		.rate	     = 66666666,
+		.actim_ctrla = 0x410d2243,
+		.actim_ctrlb = 0x0001120a,
+		.rfr_ctrl    = 0x0001d601,
+		.mr	     = 0x00000032,
+	},
+	[6] = {
+		.rate	     = 0
+	},
+};
+
+#endif

Re: [PATCH 3/6] ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 750 bytes --]

* Tony Lindgren <tony@atomide.com> [090522 15:41]:
> From: Paul Walmsley <paul@pwsan.com>
> 
> Add timing data for the Micron MT46H32M32LF-6 SDRAM chip, used on the
> OMAP3 Beagle and EVM boards.  Original timing data is from the Micron
> datasheet PDF downloaded from:
> 
> http://download.micron.com/pdf/datasheets/dram/mobile/1gb_ddr_mobile_sdram_t48m.pdf
> 
> Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
> the chips used on Beagle & OMAP3EVM.

Here's this one with updated timings from Paul:

Boards that used 133.3MHz maximum rate SDRAM were never released to the
public and presumably used the OMAPZoom kernel; so, drop these unused
rates.  Viz.:

    http://marc.info/?l=linux-omap&m=124232922426311&w=2

Regards,

Tony


[-- Attachment #2: sdram-micron-v2.patch --]
[-- Type: text/x-diff, Size: 4322 bytes --]

>From 91429b625404116b31f7c03700407df11ed61bcb Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 21 May 2009 09:50:27 -0700
Subject: [PATCH] ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2

Add timing data for the Micron MT46H32M32LF-6 SDRAM chip, used on the
OMAP3 Beagle and EVM boards.  Original timing data is from the Micron
datasheet PDF downloaded from:

http://download.micron.com/pdf/datasheets/dram/mobile/1gb_ddr_mobile_sdram_t48m.pdf

Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
the chips used on Beagle & OMAP3EVM.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d..f25082c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -105,6 +105,8 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+#include "sdram-micron-mt46h32m32lf-6.h"
+
 static struct omap_uart_config omap3_beagle_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
@@ -185,7 +187,7 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c..3571bb4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -36,6 +36,7 @@
 #include <mach/mcspi.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
@@ -118,7 +119,7 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23be..c7443ff 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -45,6 +45,7 @@
 #include <mach/nand.h>
 #include <mach/usb.h>
 
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OVERO_GPIO_BT_XGATE	15
@@ -303,7 +304,7 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 0000000..02e1c2d
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x9a9db4c6,
+		.actim_ctrlb = 0x00011217,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x51512283,
+		.actim_ctrlb = 0x0001120c,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000032,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif

[PATCH 4/6] ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6

[Tony Lindgren]

From: Paul Walmsley <paul@pwsan.com>

Add timing data for the Qimonda HYB18M512160AF-6 SDRAM chip, used on
the OMAP3430SDP boards.

Thanks to Rajendra Nayak <rnayak@ti.com> for his help identifying
the chip used on 3430SDP.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-3430sdp.c                |    3 +
 .../mach-omap2/sdram-qimonda-hyb18m512160af-6.h    |   54 ++++++++++++++++++++
 2 files changed, 56 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 439b826..1d0c30a 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -41,6 +41,7 @@
 #include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 
+#include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
@@ -168,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 0000000..3751d29
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+	[0] = {
+		.rate	     = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[1] = {
+		.rate	     = 165941176,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr	     = 0x00000032,
+	},
+	[2] = {
+		.rate	     = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[3] = {
+		.rate	     = 82970588,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr	     = 0x00000022,
+	},
+	[4] = {
+		.rate	     = 0
+	},
+};
+
+#endif

[PATCH 5/6] ARM: OMAP3: ZOOM MDK: Add FB support to board file

[Tony Lindgren]

From: Imre Deak <imre.deak@nokia.com>

Based on an earlier patch by Stanley.Miao <stanley.miao@windriver.com>
with board-*.c changes split to avoid conflicts with other device updates.

Cc: linux-fbdev-devel@lists.sourceforge.net
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-ldp.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0f..59ac8ed 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -77,10 +77,6 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_smsc911x_device,
-};
-
 static inline void __init ldp_init_smsc911x(void)
 {
 	int eth_cs;
@@ -122,8 +118,18 @@ static struct omap_uart_config ldp_uart_config __initdata = {
 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
 };
 
+static struct platform_device ldp_lcd_device = {
+	.name		= "ldp_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
 static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_UART,	&ldp_uart_config },
+	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -168,6 +174,11 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct platform_device *ldp_devices[] __initdata = {
+	&ldp_smsc911x_device,
+	&ldp_lcd_device,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();

[PATCH 6/6] ARM: OMAP3: Initialize more devices for LDP

[Tony Lindgren]

Based on an earlier patches by Stanley.Miao <stanley.miao@windriver.com>
and Nishant Kamat <nskamat@ti.com>.

Note that at the ads7846 support still needs support for vaux_control
for the touchscreen to work.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-ldp.c          |  204 ++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/keypad.h |    4 +
 2 files changed, 207 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 59ac8ed..d8bc0a7 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
@@ -77,6 +80,165 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
+static int ldp_twl4030_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap		= ldp_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
+	.rep		= 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+	[0] = {
+		.code			= KEY_ENTER,
+		.gpio			= 101,
+		.desc			= "enter sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[1] = {
+		.code			= KEY_F1,
+		.gpio			= 102,
+		.desc			= "func 1",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[2] = {
+		.code			= KEY_F2,
+		.gpio			= 103,
+		.desc			= "func 2",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[3] = {
+		.code			= KEY_F3,
+		.gpio			= 104,
+		.desc			= "func 3",
+		.active_low		= 1,
+		.debounce_interval 	= 30,
+	},
+	[4] = {
+		.code			= KEY_F4,
+		.gpio			= 105,
+		.desc			= "func 4",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[5] = {
+		.code			= KEY_LEFT,
+		.gpio			= 106,
+		.desc			= "left sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[6] = {
+		.code			= KEY_RIGHT,
+		.gpio			= 107,
+		.desc			= "right sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[7] = {
+		.code			= KEY_UP,
+		.gpio			= 108,
+		.desc			= "up sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+	[8] = {
+		.code			= KEY_DOWN,
+		.gpio			= 109,
+		.desc			= "down sw",
+		.active_low		= 1,
+		.debounce_interval	= 30,
+	},
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+	.buttons		= ldp_gpio_keys_buttons,
+	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
+	.rep			= 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ldp_gpio_keys,
+	},
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ts_gpio);
+	omap_set_gpio_debounce(ts_gpio, 1);
+	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+	[0] = {
+		/*
+		 * TSC2046 operates at a max freqency of 2MHz, so
+		 * operate slightly below at 1.5MHz
+		 */
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &tsc2046_mcspi_config,
+		.irq			= 0,
+		.platform_data		= &tsc2046_config,
+	},
+};
+
 static inline void __init ldp_init_smsc911x(void)
 {
 	int eth_cs;
@@ -132,18 +294,49 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
+static struct twl4030_usb_data ldp_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
+static struct twl4030_madc_platform_data ldp_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ldp_vmmc1_supply,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.madc		= &ldp_madc_data,
+	.usb		= &ldp_usb_data,
+	.vmmc1		= &ldp_vmmc1,
 	.gpio		= &ldp_gpio_data,
+	.keypad		= &ldp_kp_twl4030_data,
 };
 
 static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -177,6 +370,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_smsc911x_device,
 	&ldp_lcd_device,
+	&ldp_gpio_keys_device,
 };
 
 static void __init omap_ldp_init(void)
@@ -185,9 +379,17 @@ static void __init omap_ldp_init(void)
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	ts_gpio = 54;
+	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+	spi_register_board_info(ldp_spi_board_info,
+				ARRAY_SIZE(ldp_spi_board_info));
+	ads7846_dev_init();
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
+
+	twl4030_mmc_init(mmc);
+	/* link regulators to MMC adapters */
+	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
 static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923a..45ea3ae 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
 #define GROUP_3		(3 << 16)
 #define GROUP_MASK	GROUP_3
 
+#define KEY_PERSISTENT		0x00800000
+#define KEYNUM_MASK		0x00EFFFFF
 #define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 

Re: [PATCH 6/6] ARM: OMAP3: Initialize more devices for LDP

[Russell King - ARM Linux]

On Fri, May 22, 2009 at 03:45:41PM -0700, Tony Lindgren wrote:
> +static struct regulator_consumer_supply ldp_vmmc1_supply = {
> +	.supply			= "vmmc",
> +};
> +
> +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
> +static struct regulator_init_data ldp_vmmc1 = {
> +	.consumer_supplies	= &ldp_vmmc1_supply,
> +};
> +
>  static struct twl4030_platform_data ldp_twldata = {
> +	.vmmc1		= &ldp_vmmc1,
>  };
>  
>  static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {

> @@ -185,9 +379,17 @@ static void __init omap_ldp_init(void)
>  	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
>  	omap_board_config = ldp_config;
>  	omap_board_config_size = ARRAY_SIZE(ldp_config);
> +	ts_gpio = 54;
> +	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
> +	spi_register_board_info(ldp_spi_board_info,
> +				ARRAY_SIZE(ldp_spi_board_info));
> +	ads7846_dev_init();
>  	omap_serial_init();
> -	twl4030_mmc_init(mmc);
>  	usb_musb_init();
> +
> +	twl4030_mmc_init(mmc);
> +	/* link regulators to MMC adapters */
> +	ldp_vmmc1_supply.dev = mmc[0].dev;

This feels wrong - setup after registering devices.  All it takes is to
have to move various device drivers to be earlier in the initialization
ordering and things start breaking in unexpected ways.

If MMC controls the Vmmc1 supply, then why does the Vmmc1 supply need
the struct device pointer for the MMC controller?

Re: [PATCH 6/6] ARM: OMAP3: Initialize more devices for LDP

[Mark Brown]

On Mon, May 25, 2009 at 01:59:20PM +0100, Russell King - ARM Linux wrote:
> On Fri, May 22, 2009 at 03:45:41PM -0700, Tony Lindgren wrote:

> > +	/* link regulators to MMC adapters */
> > +	ldp_vmmc1_supply.dev = mmc[0].dev;

> This feels wrong - setup after registering devices.  All it takes is to
> have to move various device drivers to be earlier in the initialization
> ordering and things start breaking in unexpected ways.

> If MMC controls the Vmmc1 supply, then why does the Vmmc1 supply need
> the struct device pointer for the MMC controller?

Like the clock API the regulator API looks up clients for regulators
based on a combination of the struct device for the client driver and
the name of the supply.  Unfortunately with both the I2C and SPI APIs
the struct device is only available once the driver has probed so this
can't be set up with static data prior to probe, hence this sort of
bodge.

Long term I think we'll want to fix I2C and SPI to let us have static
data for this.

Re: [PATCH 0/6] Updates for omap3 for merge window after 2.6.30

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [090522 15:37]:
> Hi all,
> 
> Here are mostly omap3 specific updates for the coming merge window
> for review. Still to come few more boards and regulator framework
> changes for omap3 in one more series.

I've merged these into omap for-next branch.
 
> Regards,
> 
> Tony
> 
> ---
> 
> Imre Deak (1):
>       ARM: OMAP3: ZOOM MDK: Add FB support to board file
> 
> Paul Walmsley (2):
>       ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6
>       ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6
> 
> Tony Lindgren (2):
>       ARM: OMAP3: Initialize more devices for LDP
>       ARM: OMAP2/3: Remove L4_WK_OMAP_BASE, L4_PER_OMAP_BASE, L4_EMU_BASE, L3_OMAP_BASE
> 
> Vikram Pandita (1):
>       ARM: OMAP2/3: Serial: Remove arch_initcall dependency
> 
> 
>  arch/arm/mach-omap2/board-3430sdp.c                |    3 
>  arch/arm/mach-omap2/board-ldp.c                    |  219 ++++++++++++++++++++
>  arch/arm/mach-omap2/board-omap3beagle.c            |    4 
>  arch/arm/mach-omap2/board-omap3pandora.c           |    3 
>  arch/arm/mach-omap2/board-overo.c                  |    3 
>  arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h  |   69 ++++++
>  .../mach-omap2/sdram-qimonda-hyb18m512160af-6.h    |   54 +++++
>  arch/arm/mach-omap2/serial.c                       |   22 +-
>  arch/arm/plat-omap/include/mach/keypad.h           |    4 
>  arch/arm/plat-omap/include/mach/omap34xx.h         |    4 
>  10 files changed, 361 insertions(+), 24 deletions(-)
>  create mode 100644 arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
>  create mode 100644 arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
> 
> -- 
> Signature
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html