public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Amit Kucheria <amit.kucheria@verdurent.com>
To: linux-omap@vger.kernel.org
Subject: Re: [PATCH] [PATCH] twl4030: Add some error checking to twl4030 init
Date: Wed, 3 Jun 2009 11:49:58 +0300	[thread overview]
Message-ID: <20090603084958.GO16000@everest> (raw)
In-Reply-To: <1241611418-19730-1-git-send-email-amit.kucheria@verdurent.com>

Bump..

This patch was acked by David Brownell earlier in the thread.

Regards,
Amit

On Wed, May 06, 2009 at 03:03:38PM +0300, Amit Kucheria wrote:
> Check for return values of i2c read/write operations and size of scripts being
> uploaded to TWL4030
> 
> (Removed the unrelated string changes based on David Brownell's comment)
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
> ---
>  drivers/mfd/twl4030-power.c |   52 +++++++++++++++++++++++++++++++-----------
>  1 files changed, 38 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> index 9dc493b..8f5d149 100644
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -257,36 +257,40 @@ static int __init config_warmreset_sequence(u8 address)
>  	return err;
>  }
>  
> -void twl4030_configure_resource(struct twl4030_resconfig *rconfig)
> +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
>  {
>  	int rconfig_addr;
> +	int err;
>  	u8 type;
>  
>  	if (rconfig->resource > NUM_OF_RESOURCES) {
>  		printk(KERN_ERR
>  			"TWL4030 Resource %d does not exist\n",
>  			rconfig->resource);
> -		return;
> +		return -EINVAL;
>  	}
>  
>  	rconfig_addr = res_config_addrs[rconfig->resource];
>  
>  	/* Set resource group */
> -
>  	if (rconfig->devgroup >= 0)
> -		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> +		err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
>  					rconfig->devgroup << 5,
>  					rconfig_addr + DEVGROUP_OFFSET);
> +	if (err < 0) {
> +		printk(KERN_ERR
> +		       "TWL4030 failed to program devgroup");
> +		return err;
> +	}
>  
>  	/* Set resource types */
> -
> -	if (twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
> -					&type,
> -					rconfig_addr + TYPE_OFFSET) < 0) {
> +	err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type,
> +				  rconfig_addr + TYPE_OFFSET);
> +	if (err < 0) {
>  		printk(KERN_ERR
> -			"TWL4030 Resource %d type could not read\n",
> -			rconfig->resource);
> -		return;
> +		       "TWL4030 Resource %d type could not be read\n",
> +		       rconfig->resource);
> +		return err;
>  	}
>  
>  	if (rconfig->type >= 0) {
> @@ -299,8 +303,15 @@ void twl4030_configure_resource(struct twl4030_resconfig *rconfig)
>  		type |= rconfig->type2 << 3;
>  	}
>  
> -	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> +	err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
>  				type, rconfig_addr + TYPE_OFFSET);
> +	if (err < 0) {
> +		printk(KERN_ERR
> +		       "TWL4030 failed to program resource type");
> +		return err;
> +	}
> +
> +	return 0;
>  
>  }
>  
> @@ -309,6 +320,12 @@ static int __init load_triton_script(struct twl4030_script *tscript)
>  	u8 address = triton_next_free_address;
>  	int err;
>  
> +	/* Make sure the script isn't going beyond last valid address */
> +	if ((address + tscript->size) > (END_OF_SCRIPT-1)) {
> +		printk(KERN_ERR "TWL4030 script too big error\n");
> +		return -EINVAL;
> +	}
> +
>  	err = twl4030_write_script(address, tscript->script, tscript->size);
>  	if (err)
>  		return err;
> @@ -346,15 +363,22 @@ void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts)
>  
>  	for (i = 0; i < triton2_scripts->size; i++) {
>  		err = load_triton_script(triton2_scripts->scripts[i]);
> -		if (err)
> +		if (err < 0) {
> +			printk(KERN_ERR "TWL4030 failed to load scripts");
>  			break;
> +		}
>  	}
>  
>  	resconfig = triton2_scripts->resource_config;
>  	if (resconfig) {
>  		while (resconfig->resource) {
> -			twl4030_configure_resource(resconfig);
> +			err = twl4030_configure_resource(resconfig);
>  			resconfig++;
> +			if (err < 0) {
> +				printk(KERN_ERR
> +				       "TWL4030 failed to configure resource");
> +				break;
> +			}
>  		}
>  	}
>  
> -- 
> 1.6.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
-------------------------------------------------------------------------
Amit Kucheria,				 Kernel Developer, Verdurent
-------------------------------------------------------------------------

  reply	other threads:[~2009-06-03  8:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-20 12:49 [PATCH] twl4030: Add some error checking to twl4030 init Amit Kucheria
2009-04-20 20:38 ` Premi, Sanjeev
2009-04-20 21:28   ` Amit Kucheria
2009-04-22 13:11     ` Peter 'p2' De Schrijver
2009-04-23 21:16     ` David Brownell
2009-05-06 12:03       ` [PATCH] " Amit Kucheria
2009-06-03  8:49         ` Amit Kucheria [this message]
2009-06-03 16:53           ` Tony Lindgren
2009-06-03 16:53         ` [APPLIED] " Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090603084958.GO16000@everest \
    --to=amit.kucheria@verdurent.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox