public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] OMAP2/3: Add support for flash on SDP boards
@ 2009-06-15 12:56 Tony Lindgren
  0 siblings, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2009-06-15 12:56 UTC (permalink / raw)
  To: linux-omap

[-- Attachment #1: Type: text/plain, Size: 67 bytes --]

Hi,

Here's a minimal patch to add onenand support for SDPs.

Tony

[-- Attachment #2: sdp-flash.patch --]
[-- Type: text/x-diff, Size: 5002 bytes --]

>From b8a6a05466f241454e73966dd5b1446216fed3db Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Jun 2009 15:43:37 +0300
Subject: [PATCH] OMAP2/3: Add support for flash on SDP boards

Add support for flash on SDP boards. Currently only onenand
is supported.

Only tested on 3430SDP, somebody please test on 2430SDP.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1f86f11..a0c2ac1 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
+					   board-sdp-flash.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
@@ -57,6 +58,7 @@ obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
+					   board-sdp-flash.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_NOKIA_N800)		+= board-n800.o \
 					   board-n800-mmc.o \
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9c3fdcd..3aa106f 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -39,6 +39,7 @@
 #include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
+#include "board-sdp.h"
 
 #define SDP2430_CS0_BASE	0x04000000
 #define SECONDARY_LCD_GPIO		147
@@ -211,6 +212,7 @@ static void __init omap_2430sdp_init(void)
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
 	board_smc91x_init();
+	sdp_flash_init();
 
 	/* Turn off secondary LCD backlight */
 	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 21b4a52..6f16803 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -43,6 +43,7 @@
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
+#include "board-sdp.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
@@ -495,6 +496,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	sdp_flash_init();
 	usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61);
 }
 
diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c
new file mode 100644
index 0000000..1496d89
--- /dev/null
+++ b/arch/arm/mach-omap2/board-sdp-flash.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/arm/mach-omap2/board-sdp-flash.c
+ *
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <mach/onenand.h>
+
+/* REVISIT: Add support for other flash memory types */
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition board_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE	 /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE	 /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 2,	/* REVISIT: Is this the same for 2430 SDP? */
+	.parts		= board_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(board_onenand_partitions),
+	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif	/* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+void __init sdp_flash_init(void)
+{
+	board_onenand_init();
+}
diff --git a/arch/arm/mach-omap2/board-sdp.h b/arch/arm/mach-omap2/board-sdp.h
new file mode 100644
index 0000000..ad72189
--- /dev/null
+++ b/arch/arm/mach-omap2/board-sdp.h
@@ -0,0 +1,9 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-sdp.h
+ *
+ *  Information structures for SDP-specific board config data
+ *
+ *  Copyright (C) 2009 Nokia Corporation
+ */
+
+extern void sdp_flash_init(void);

^ permalink raw reply related	[flat|nested] 3+ messages in thread
* [PATCH] OMAP2/3: Add support for flash on SDP boards
@ 2009-08-19  4:44 vimal singh
  2009-08-22  6:57 ` vimal singh
  0 siblings, 1 reply; 3+ messages in thread
From: vimal singh @ 2009-08-19  4:44 UTC (permalink / raw)
  To: linux-omap; +Cc: tony

Add support for flash on SDP boards. NAND, NOR and OneNAND
are supported.

Only tested on 3430SDP (ES2 and ES3.1), somebody please test on
2430SDP and check the chips select for 2430SDP.

Also note that:
For OneNAND: in the earlier 2430SDP code the kernel partition
was set to only 1MB instead of 2MB on 3430SDP. If people want
the old partition sizes back on 2430SDP, please provide a patch.

For NAND: 'U-Boot', 'Boot Env' and 'Kernel' partitions sizes increased
by few blocks to provide few spare blocks for NAND bab block management
in u-boot. If people want old partition sizes, please provide a patch.


Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile           |    2
 arch/arm/mach-omap2/board-2430sdp.c    |    2
 arch/arm/mach-omap2/board-3430sdp.c    |    2
 arch/arm/mach-omap2/board-sdp-flash.c  |  326 +++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/board-sdp.h        |   15 +
 arch/arm/plat-omap/include/mach/gpmc.h |    2
 6 files changed, 349 insertions(+)

Index: linux-omap-2.6/arch/arm/mach-omap2/Makefile
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/Makefile
+++ linux-omap-2.6/arch/arm/mach-omap2/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
+					   board-sdp-flash.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
@@ -61,6 +62,7 @@ obj-$(CONFIG_MACH_OMAP3EVM)		+= board-om
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
+					   board-sdp-flash.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
Index: linux-omap-2.6/arch/arm/mach-omap2/board-2430sdp.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/board-2430sdp.c
+++ linux-omap-2.6/arch/arm/mach-omap2/board-2430sdp.c
@@ -38,6 +38,7 @@
 #include <mach/usb.h>
 #include <mach/gpmc-smc91x.h>

+#include "board-sdp.h"
 #include "mmc-twl4030.h"

 #define SDP2430_CS0_BASE	0x04000000
@@ -210,6 +211,7 @@ static void __init omap_2430sdp_init(voi
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
 	board_smc91x_init();
+	sdp_flash_init();

 	/* Turn off secondary LCD backlight */
 	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
Index: linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- linux-omap-2.6.orig/arch/arm/mach-omap2/board-3430sdp.c
+++ linux-omap-2.6/arch/arm/mach-omap2/board-3430sdp.c
@@ -41,6 +41,7 @@
 #include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>

+#include "board-sdp.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"

@@ -494,6 +495,7 @@ static void __init omap_3430sdp_init(voi
 	omap_serial_init(&sdp3430_uart_config);
 	usb_musb_init();
 	board_smc91x_init();
+	sdp_flash_init();
 	usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61);
 }

Index: linux-omap-2.6/arch/arm/mach-omap2/board-sdp-flash.c
===================================================================
--- /dev/null
+++ linux-omap-2.6/arch/arm/mach-omap2/board-sdp-flash.c
@@ -0,0 +1,326 @@
+/*
+ * arch/arm/mach-omap2/board-sdp-flash.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp-flash.c
+ * Author: Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+#include <mach/onenand.h>
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+
+#define REG_FPGA_REV			0x10
+#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
+#define MAX_SUPPORTED_GPMC_CONFIG	3
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1	SZ_64M
+#define FLASH_SIZE_SDPV2	SZ_128M
+
+#define FLASH_BASE_SDPV1	0x04000000 /* NOR flash (64 Meg aligned) */
+#define FLASH_BASE_SDPV2	0x10000000 /* NOR flash (256 Meg aligned) */
+
+#define DEBUG_BASE		0x08000000 /* debug board */
+
+#define PDC_NOR		1
+#define PDC_NAND	2
+#define PDC_ONENAND	3
+#define DBG_MPDB	4
+
+/* REVISIT: Does for some x, chip_sel_sdp[x] maches for 2430 SDP ? */
+
+/* SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ */
+static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
+/* GPMC CS Indices (ON=0, OFF=1)*/
+/* S8-1 2 3 4 IDX   CS0,       CS1,      CS2 ..                    CS7  */
+/*ON ON ON ON*/{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0},
+/*ON ON ON OFF*/{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0},
+/*ON ON OFF ON */{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0},
+};
+
+static struct mtd_partition sdp_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "Bootloader-NOR",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "Params-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_256K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "Kernel-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "Filesystem-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data sdp_nor_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= sdp_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(sdp_nor_partitions),
+};
+
+static struct resource sdp_nor_resource = {
+	.start		= 0,
+	.end		= 0,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+			.platform_data = &sdp_nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sdp_nor_resource,
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition board_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.parts		= board_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(board_onenand_partitions),
+	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
+};
+
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+static struct mtd_partition sdp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
+		.size		= 6 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 40 * (64 * 2048),
+	},
+	{
+		.name		= "File System - NAND",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
+	},
+};
+
+static struct omap_nand_platform_data sdp_nand_data = {
+	.parts		= sdp_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(sdp_nand_partitions),
+	.nand_setup	= NULL,
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.dev_ready	= NULL,
+};
+
+static struct resource sdp_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nand_device = {
+	.name			= "omap2-nand",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &sdp_nand_data,
+	},
+	.num_resources	= 1,
+	.resource		= &sdp_nand_resource,
+};
+
+/**
+ * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
+ * the various cs values.
+ */
+static u8 get_gpmc0_type(void)
+{
+	u8 cs;
+	void __iomem *fpga_map_addr;
+	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
+	/* if ioremap does not return a valid pointer, exit */
+	if (!fpga_map_addr)
+		return -ENOMEM;
+
+	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV))) {
+		/* we dont have an DEBUG FPGA??? */
+		/* Depend on #defines!! default to strata boot return param */
+		return 0x0;
+	}
+	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
+	cs = (u8) (__raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2)
+			& 0xF);
+	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
+	if (omap_rev() >= OMAP3430_REV_ES1_0)
+		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
+		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
+			((cs & 2) << 1) | ((cs & 1) << 3);
+	else
+		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
+		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
+	iounmap(fpga_map_addr);
+	return cs;
+}
+
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp_flash_init(void)
+{
+	u8		cs = 0;
+	u8		nandcs = GPMC_CS_NUM + 1;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+	u8		idx;
+	unsigned char	*config_sel = NULL;
+
+	/* REVISIT: Is this return correct idx for 2430 SDP?
+	 * for which cs configuration matches for 2430 SDP?
+	 */
+	idx = get_gpmc0_type();
+	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
+		printk(KERN_ERR "Invalid Chip select Selection..\
+				sdp3430_flash_init returned with error\n");
+		return;
+	}
+	config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+
+	/* Configure start address and size of NOR device */
+	if (omap_rev() >= OMAP3430_REV_ES1_0) {
+		sdp_nor_resource.start	= FLASH_BASE_SDPV2;
+		sdp_nor_resource.end	= FLASH_BASE_SDPV2
+						+ FLASH_SIZE_SDPV2 - 1;
+	} else {
+		sdp_nor_resource.start	= FLASH_BASE_SDPV1;
+		sdp_nor_resource.end	= FLASH_BASE_SDPV1
+						+ FLASH_SIZE_SDPV1 - 1;
+	}
+
+	if (platform_device_register(&sdp_nor_device) < 0)
+		printk(KERN_ERR "Unable to register NOR device\n");
+
+	while (cs < GPMC_CS_NUM) {
+		switch (config_sel[cs]) {
+		case PDC_NAND:
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+			break;
+		case PDC_ONENAND:
+			if (onenandcs > GPMC_CS_NUM)
+				onenandcs = cs;
+			break;
+		};
+		cs++;
+	}
+
+	if (onenandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "OneNAND: Unable to find configuration "
+				" in GPMC\n ");
+	} else {
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+		board_onenand_data.cs = onenandcs;
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+		board_onenand_init();
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				" in GPMC\n ");
+	} else {
+		sdp_nand_data.cs = nandcs;
+		sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT +
+					GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT);
+
+		if (platform_device_register(&sdp_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+
+	}
+}
Index: linux-omap-2.6/arch/arm/mach-omap2/board-sdp.h
===================================================================
--- /dev/null
+++ linux-omap-2.6/arch/arm/mach-omap2/board-sdp.h
@@ -0,0 +1,15 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-sdp.h
+ *
+ *  Information structures for SDP-specific board config data
+ *
+ *  Copyright (C) 2009 Nokia Corporation
+ *  Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+extern void sdp_flash_init(void);
+
Index: linux-omap-2.6/arch/arm/plat-omap/include/mach/gpmc.h
===================================================================
--- linux-omap-2.6.orig/arch/arm/plat-omap/include/mach/gpmc.h
+++ linux-omap-2.6/arch/arm/plat-omap/include/mach/gpmc.h
@@ -27,6 +27,8 @@

 #define GPMC_CONFIG		0x50
 #define GPMC_STATUS		0x54
+#define GPMC_CS0_BASE		0x60
+#define GPMC_CS_SIZE		0x30

 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)



^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-08-22  6:57 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-06-15 12:56 [PATCH] OMAP2/3: Add support for flash on SDP boards Tony Lindgren
  -- strict thread matches above, loose matches on Subject: below --
2009-08-19  4:44 vimal singh
2009-08-22  6:57 ` vimal singh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox