Re: L-O master branch broken ?

Kevin Hilman
2009-06-18T15:31:53Z

"Hemanth V" <hemanthv@ti.com> writes:

> ----- Original Message -----
> From: "Tony Lindgren" <tony@atomide.com>
> To: "Hemanth V" <hemanthv@ti.com>
> Cc: "Kevin Hilman" <khilman@deeprootsystems.com>;
> <linux-omap@vger.kernel.org>
> Sent: Thursday, June 18, 2009 3:52 PM
> Subject: Re: L-O master branch broken ?
>
>
>>* Hemanth V <hemanthv@ti.com> [090618 13:39]:
>>> ----- Original Message ----- From: "Tony Lindgren" <tony@atomide.com>
>>>
>>>
>>>>> I get the below error while compiling 3430SDP. I see below commit
>>>>> as the
>>>>> latest one.
>>>
>>>>
>>>> Thanks, pushing a fix right now with the missing brace missing from
>>>> Kevin's
>>>> sram.c patch. Also moved around the defines so sram.c build for omap1.
>>>>
>>>
>>> Booting still seems to have problems. Its hung after start kernel
>>>
>>>
>>> Bytes transferred = 2480664 (25da18 hex)
>>> ## Booting image at 80000000 ...
>>> Image Name: Linux-2.6.30-omap1-06022-g6f4712
>>> Image Type: ARM Linux Kernel Image (uncompressed)
>>> Data Size: 2480600 Bytes = 2.4 MB
>>> Load Address: 80008000
>>> Entry Point: 80008000
>>> Verifying Checksum ... OK
>>> OK
>>>
>>> Starting kernel ...
>>>
>>
>> Can you see what happens with DEBUG_LL enabled?
>
> Doesn't seem to show any additional messages even with
> DEBUG_LL enabled

Since you don't even see 'Uncompressing Linux....', I'm guessing you
have CONFIG_OMAP_LL_DEBUG_UART3=y in your .config

Try setting this to UART1.

Kevin