Re: [PATCH v2] OMAP3: RX51: Define TWL4030 USB transceiver in board file

[Felipe Balbi <felipe.balbi@nokia.com>]

On Tue, Jul 07, 2009 at 01:15:22PM +0200, Quadros Roger (EXT-Teleca/Helsinki) wrote:
> Add OTG transceiver to RX51 platform data to prevent kernel NULL pointer
> dereference during MUSB initialisation.
> 
> Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>

> ---
>  arch/arm/mach-omap2/board-rx51-peripherals.c |    5 +++++
>  1 files changed, 5 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
> index 9a0bf67..56d931a 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
>  	.setup			= rx51_twlgpio_setup,
>  };
>  
> +static struct twl4030_usb_data rx51_usb_data = {
> +	.usb_mode		= T2_USB_MODE_ULPI,
> +};
> +
>  static struct twl4030_platform_data rx51_twldata = {
>  	.irq_base		= TWL4030_IRQ_BASE,
>  	.irq_end		= TWL4030_IRQ_END,
> @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
>  	.gpio			= &rx51_gpio_data,
>  	.keypad			= &rx51_kp_data,
>  	.madc			= &rx51_madc_data,
> +	.usb			= &rx51_usb_data,
>  
>  	.vaux1			= &rx51_vaux1,
>  	.vaux2			= &rx51_vaux2,
> -- 
> 1.6.0.4

-- 
balbi