From: Adrian Hunter <adrian.hunter@nokia.com>
To: Pierre Ossman <pierre@ossman.eu>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>,
Denis Karpov <ext-denis.2.karpov@nokia.com>,
Adrian Hunter <adrian.hunter@nokia.com>,
linux-omap Mailing List <linux-omap@vger.kernel.org>,
lkml <linux-kernel@vger.kernel.org>
Subject: [PATCH 9/32] omap_hsmmc: add debugfs entry (host registers)
Date: Fri, 10 Jul 2009 15:41:08 +0300 [thread overview]
Message-ID: <20090710124108.1262.91177.sendpatchset@ahunter-tower> (raw)
In-Reply-To: <20090710124004.1262.10422.sendpatchset@ahunter-tower>
>From 4951591bffd4c215e4d74e13fc46f0a625264288 Mon Sep 17 00:00:00 2001
From: Denis Karpov <ext-denis.2.karpov@nokia.com>
Date: Wed, 22 Apr 2009 14:21:34 +0200
Subject: [PATCH] omap_hsmmc: add debugfs entry (host registers)
Adds <debugfs_root>/kernel/debug/mmc<N>/regs entry,
contents show registers' state and some driver internal
state variables.
Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 57 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 57 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 1cf9cfb..cbd8376 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -17,6 +17,8 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -967,6 +969,59 @@ static struct mmc_host_ops mmc_omap_ops = {
/* NYET -- enable_sdio_irq */
};
+#ifdef CONFIG_DEBUG_FS
+
+static int mmc_regs_show(struct seq_file *s, void *data)
+{
+ struct mmc_host *mmc = s->private;
+ struct mmc_omap_host *host = mmc_priv(mmc);
+
+ seq_printf(s, "mmc%d regs:\n", mmc->index);
+
+ seq_printf(s, "SYSCONFIG:\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, SYSCONFIG));
+ seq_printf(s, "CON:\t\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, CON));
+ seq_printf(s, "HCTL:\t\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, HCTL));
+ seq_printf(s, "SYSCTL:\t\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, SYSCTL));
+ seq_printf(s, "IE:\t\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, IE));
+ seq_printf(s, "ISE:\t\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, ISE));
+ seq_printf(s, "CAPA:\t\t0x%08x\n",
+ OMAP_HSMMC_READ(host->base, CAPA));
+ return 0;
+}
+
+static int mmc_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mmc_regs_show, inode->i_private);
+}
+
+static const struct file_operations mmc_regs_fops = {
+ .open = mmc_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void omap_mmc_debugfs(struct mmc_host *mmc)
+{
+ if (mmc->debugfs_root)
+ debugfs_create_file("regs", S_IRUSR, mmc->debugfs_root,
+ mmc, &mmc_regs_fops);
+}
+
+#else
+
+static void omap_mmc_debugfs(struct mmc_host *mmc)
+{
+}
+
+#endif
+
static int __init omap_mmc_probe(struct platform_device *pdev)
{
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
@@ -1150,6 +1205,8 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
goto err_cover_switch;
}
+ omap_mmc_debugfs(mmc);
+
return 0;
err_cover_switch:
--
1.5.6.3
next prev parent reply other threads:[~2009-07-10 12:37 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-10 12:40 [PATCH 0/32] mmc and omap_hsmmc patches Adrian Hunter
2009-07-10 12:40 ` [PATCH 1/32] mmc: add 'enable' and 'disable' methods to mmc host Adrian Hunter
2009-07-10 17:15 ` Madhusudhan
2009-07-10 19:12 ` Adrian Hunter
2009-07-23 20:37 ` Linus Walleij
2009-07-10 12:40 ` [PATCH 2/32] mmc: allow host claim / release nesting Adrian Hunter
2009-07-10 12:40 ` [PATCH 3/32] mmc: add MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-10 12:40 ` [PATCH 4/32] mmc: add ability to save power by powering off cards Adrian Hunter
2009-07-10 12:40 ` [PATCH 5/32] mmc: add mmc card sleep and awake support Adrian Hunter
2009-07-10 12:40 ` [PATCH 6/32] mmc: power off once at removal Adrian Hunter
2009-07-10 12:40 ` [PATCH 7/32] mmc: add host capabilities for SD only and MMC only Adrian Hunter
2009-07-25 15:53 ` Matt Fleming
2009-07-25 16:17 ` Adrian Hunter
2009-07-25 18:40 ` Matt Fleming
2009-07-25 19:45 ` Adrian Hunter
2009-07-25 23:51 ` Matt Fleming
2009-07-26 6:14 ` Adrian Hunter
2009-07-10 12:41 ` [PATCH 8/32] mmc: check status after MMC SWITCH command Adrian Hunter
2009-07-10 12:41 ` Adrian Hunter [this message]
2009-07-10 12:41 ` [PATCH 10/32] omap_hsmmc: make use of new enable/disable interface Adrian Hunter
2009-07-10 12:41 ` [PATCH 11/32] ARM: OMAP: mmc-twl4030: add context loss counter support Adrian Hunter
2009-07-10 12:41 ` [PATCH 12/32] omap_hsmmc: keep track of power mode Adrian Hunter
2009-07-10 12:41 ` [PATCH 13/32] omap_hsmmc: context save/restore support Adrian Hunter
2009-07-10 12:41 ` [PATCH 14/32] omap_hsmmc: set open drain bit correctly Adrian Hunter
2009-07-10 12:41 ` [PATCH 15/32] omap_hsmmc: ensure workqueues are empty before suspend Adrian Hunter
2009-07-10 12:41 ` [PATCH 16/32] omap_hsmmc: fix scatter-gather list sanity checking Adrian Hunter
2009-07-10 12:42 ` [PATCH 17/32] omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-10 12:42 ` [PATCH 18/32] omap_hsmmc: support for deeper power saving states Adrian Hunter
2009-07-10 12:42 ` [PATCH 19/32] ARM: OMAP: mmc-twl4030: add regulator sleep / wake function Adrian Hunter
2009-07-10 12:42 ` [PATCH 20/32] omap_hsmmc: put MMC regulator to sleep Adrian Hunter
2009-07-24 22:51 ` Andrew Morton
2009-07-26 6:34 ` Adrian Hunter
2009-07-10 12:42 ` [PATCH 21/32] omap_hsmmc: add mmc card sleep and awake support Adrian Hunter
2009-07-10 12:42 ` [PATCH 22/32] omap_hsmmc: fix NULL pointer dereference Adrian Hunter
2009-07-10 12:42 ` [PATCH 23/32] omap_hsmmc: cleanup macro usage Adrian Hunter
2009-07-10 12:42 ` [PATCH 24/32] omap_hsmmc: clear interrupt status after init sequence Adrian Hunter
2009-07-10 12:43 ` [PATCH 25/32] omap_hsmmc: cater for weird CMD6 behaviour Adrian Hunter
2009-07-10 12:43 ` [PATCH 26/32] omap_hsmmc: prevent races with irq handler Adrian Hunter
2009-07-24 22:53 ` Andrew Morton
2009-07-27 9:06 ` Adrian Hunter
2009-07-10 12:43 ` [PATCH 27/32] omap_hsmmc: pass host capabilities for SD only and MMC only Adrian Hunter
2009-07-10 12:43 ` [PATCH 28/32] omap_hsmmc: code refactoring Adrian Hunter
2009-07-10 12:43 ` [PATCH 29/32] omap_hsmmc: protect the card when the cover is open Adrian Hunter
2009-07-10 12:43 ` [PATCH 30/32] omap_hsmmc: ensure all clock enables and disables are paired Adrian Hunter
2009-07-10 12:43 ` [PATCH 31/32] omap_hsmmc: set a large data timeout for commands with busy signal Adrian Hunter
2009-07-10 12:43 ` [PATCH 32/32] ARM: OMAP: RX51: set MMC capabilities and power-saving flag Adrian Hunter
2009-07-25 23:53 ` Matt Fleming
2009-07-27 7:58 ` Adrian Hunter
2009-07-27 8:27 ` Matt Fleming
2009-07-27 8:58 ` Adrian Hunter
2009-07-27 9:15 ` Matt Fleming
[not found] ` <20090727102111.GI12665@console-pimps.org>
2009-07-27 11:02 ` Adrian Hunter
2009-07-27 18:14 ` Andrew Morton
2009-07-27 19:32 ` Matt Fleming
2009-07-26 19:57 ` [PATCH 0/32] mmc and omap_hsmmc patches Matt Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090710124108.1262.91177.sendpatchset@ahunter-tower \
--to=adrian.hunter@nokia.com \
--cc=ext-denis.2.karpov@nokia.com \
--cc=jarkko.lavinen@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pierre@ossman.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox