Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@nokia.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>,
	Adrian Hunter <adrian.hunter@nokia.com>,
	linux-omap Mailing List <linux-omap@vger.kernel.org>,
	Pierre Ossman <pierre@ossman.eu>,
	Denis Karpov <ext-denis.2.karpov@nokia.com>,
	Matt Fleming <matt@console-pimps.org>,
	lkml <linux-kernel@vger.kernel.org>
Subject: [PATCH V2 3/32] mmc: add MMC_CAP_NONREMOVABLE host capability
Date: Tue, 28 Jul 2009 13:38:56 +0300	[thread overview]
Message-ID: <20090728103856.2371.60598.sendpatchset@ahunter-laptop> (raw)
In-Reply-To: <20090728103834.2371.65809.sendpatchset@ahunter-laptop>

>From 447937e379db91975b4e834f19dfb1805d813fc4 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Mon, 11 May 2009 10:03:41 +0300
Subject: [PATCH] mmc: add MMC_CAP_NONREMOVABLE host capability

eMMC's are not removable, so unsafe resume is OK always.

To permit this a new host capability MMC_CAP_NONREMOVABLE
has been added and suspend / resume updated accordingly.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
 drivers/mmc/core/mmc.c   |   41 ++++++++++++++++++++++++++++++++++-------
 drivers/mmc/core/sd.c    |   41 ++++++++++++++++++++++++++++++++++-------
 include/linux/mmc/host.h |    1 +
 3 files changed, 69 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 06084db..3e35075 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -507,8 +507,6 @@ static void mmc_detect(struct mmc_host *host)
 	}
 }
 
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-
 /*
  * Suspend callback from host.
  */
@@ -551,20 +549,49 @@ static void mmc_resume(struct mmc_host *host)
 
 }
 
-#else
+#ifdef CONFIG_MMC_UNSAFE_RESUME
 
-#define mmc_suspend NULL
-#define mmc_resume NULL
+static const struct mmc_bus_ops mmc_ops = {
+	.remove = mmc_remove,
+	.detect = mmc_detect,
+	.suspend = mmc_suspend,
+	.resume = mmc_resume,
+};
 
-#endif
+static void mmc_attach_bus_ops(struct mmc_host *host)
+{
+	mmc_attach_bus(host, &mmc_ops);
+}
+
+#else
 
 static const struct mmc_bus_ops mmc_ops = {
 	.remove = mmc_remove,
 	.detect = mmc_detect,
+	.suspend = NULL,
+	.resume = NULL,
+};
+
+static const struct mmc_bus_ops mmc_ops_unsafe = {
+	.remove = mmc_remove,
+	.detect = mmc_detect,
 	.suspend = mmc_suspend,
 	.resume = mmc_resume,
 };
 
+static void mmc_attach_bus_ops(struct mmc_host *host)
+{
+	const struct mmc_bus_ops *bus_ops;
+
+	if (host->caps & MMC_CAP_NONREMOVABLE)
+		bus_ops = &mmc_ops_unsafe;
+	else
+		bus_ops = &mmc_ops;
+	mmc_attach_bus(host, bus_ops);
+}
+
+#endif
+
 /*
  * Starting point for MMC card init.
  */
@@ -575,7 +602,7 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	mmc_attach_bus(host, &mmc_ops);
+	mmc_attach_bus_ops(host);
 
 	/*
 	 * We need to get OCR a different way for SPI.
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index cd81c39..80cccd2 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -561,8 +561,6 @@ static void mmc_sd_detect(struct mmc_host *host)
 	}
 }
 
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-
 /*
  * Suspend callback from host.
  */
@@ -605,20 +603,49 @@ static void mmc_sd_resume(struct mmc_host *host)
 
 }
 
-#else
+#ifdef CONFIG_MMC_UNSAFE_RESUME
 
-#define mmc_sd_suspend NULL
-#define mmc_sd_resume NULL
+static const struct mmc_bus_ops mmc_sd_ops = {
+	.remove = mmc_sd_remove,
+	.detect = mmc_sd_detect,
+	.suspend = mmc_sd_suspend,
+	.resume = mmc_sd_resume,
+};
 
-#endif
+static void mmc_sd_attach_bus_ops(struct mmc_host *host)
+{
+	mmc_attach_bus(host, &mmc_sd_ops);
+}
+
+#else
 
 static const struct mmc_bus_ops mmc_sd_ops = {
 	.remove = mmc_sd_remove,
 	.detect = mmc_sd_detect,
+	.suspend = NULL,
+	.resume = NULL,
+};
+
+static const struct mmc_bus_ops mmc_sd_ops_unsafe = {
+	.remove = mmc_sd_remove,
+	.detect = mmc_sd_detect,
 	.suspend = mmc_sd_suspend,
 	.resume = mmc_sd_resume,
 };
 
+static void mmc_sd_attach_bus_ops(struct mmc_host *host)
+{
+	const struct mmc_bus_ops *bus_ops;
+
+	if (host->caps & MMC_CAP_NONREMOVABLE)
+		bus_ops = &mmc_sd_ops_unsafe;
+	else
+		bus_ops = &mmc_sd_ops;
+	mmc_attach_bus(host, bus_ops);
+}
+
+#endif
+
 /*
  * Starting point for SD card init.
  */
@@ -629,7 +656,7 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
-	mmc_attach_bus(host, &mmc_sd_ops);
+	mmc_sd_attach_bus_ops(host);
 
 	/*
 	 * We need to get OCR a different way for SPI.
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 631a2fe..bb867d2 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -148,6 +148,7 @@ struct mmc_host {
 #define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
 #define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
 #define MMC_CAP_DISABLE		(1 << 7)	/* Can the host be disabled */
+#define MMC_CAP_NONREMOVABLE	(1 << 8)	/* Nonremovable e.g. eMMC */
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
-- 
1.5.6.3


  parent reply	other threads:[~2009-07-28 10:38 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-28 10:38 [PATCH V2 0/32] mmc and omap_hsmmc patches Adrian Hunter
2009-07-28 10:38 ` [PATCH V2 1/32] mmc: add 'enable' and 'disable' methods to mmc host Adrian Hunter
2009-07-28 10:38 ` [PATCH V2 2/32] mmc: allow host claim / release nesting Adrian Hunter
2009-07-28 10:38 ` Adrian Hunter [this message]
2009-07-28 10:39 ` [PATCH V2 4/32] mmc: add ability to save power by powering off cards Adrian Hunter
2009-07-30  1:05   ` Madhusudhan
2009-07-30  7:16     ` Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 5/32] mmc: add mmc card sleep and awake support Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 6/32] mmc: power off once at removal Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 7/32] mmc: add host capabilities for SD only and MMC only Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 8/32] mmc: check status after MMC SWITCH command Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 9/32] omap_hsmmc: add debugfs entry (host registers) Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 10/32] omap_hsmmc: make use of new enable/disable interface Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 11/32] ARM: OMAP: mmc-twl4030: add context loss counter support Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 12/32] omap_hsmmc: keep track of power mode Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 13/32] omap_hsmmc: context save/restore support Adrian Hunter
2009-07-30  2:00   ` Madhusudhan
2009-07-30  7:40     ` Adrian Hunter
2009-07-30 19:12       ` Madhusudhan
2009-07-30 19:33         ` Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 14/32] omap_hsmmc: set open drain bit correctly Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 15/32] omap_hsmmc: ensure workqueues are empty before suspend Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 16/32] omap_hsmmc: fix scatter-gather list sanity checking Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 17/32] omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 18/32] omap_hsmmc: support for deeper power saving states Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 19/32] ARM: OMAP: mmc-twl4030: add regulator sleep / wake function Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 20/32] omap_hsmmc: put MMC regulator to sleep Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 21/32] omap_hsmmc: add mmc card sleep and awake support Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 22/32] omap_hsmmc: fix NULL pointer dereference Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 23/32] omap_hsmmc: cleanup macro usage Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 24/32] omap_hsmmc: clear interrupt status after init sequence Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 25/32] omap_hsmmc: cater for weird CMD6 behaviour Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 26/32] omap_hsmmc: prevent races with irq handler Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 27/32] omap_hsmmc: pass host capabilities for SD only and MMC only Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 28/32] omap_hsmmc: code refactoring Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 29/32] omap_hsmmc: protect the card when the cover is open Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 30/32] omap_hsmmc: ensure all clock enables and disables are paired Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 31/32] omap_hsmmc: set a large data timeout for commands with busy signal Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 32/32] ARM: OMAP: RX51: set MMC capabilities and power-saving flag Adrian Hunter
2009-07-29 11:13 ` [PATCH V2 0/32] mmc and omap_hsmmc patches Matt Fleming
2009-07-31  0:52   ` Madhusudhan
2009-08-13 15:27     ` Madhusudhan
2009-08-13 16:29       ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090728103856.2371.60598.sendpatchset@ahunter-laptop \
    --to=adrian.hunter@nokia.com \
    --cc=akpm@linux-foundation.org \
    --cc=ext-denis.2.karpov@nokia.com \
    --cc=jarkko.lavinen@nokia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=matt@console-pimps.org \
    --cc=pierre@ossman.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox