From: Adrian Hunter <adrian.hunter@nokia.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>,
Adrian Hunter <adrian.hunter@nokia.com>,
linux-omap Mailing List <linux-omap@vger.kernel.org>,
Pierre Ossman <pierre@ossman.eu>,
Denis Karpov <ext-denis.2.karpov@nokia.com>,
Matt Fleming <matt@console-pimps.org>,
lkml <linux-kernel@vger.kernel.org>
Subject: [PATCH V2 29/32] omap_hsmmc: protect the card when the cover is open
Date: Tue, 28 Jul 2009 13:42:08 +0300 [thread overview]
Message-ID: <20090728104208.2371.2569.sendpatchset@ahunter-laptop> (raw)
In-Reply-To: <20090728103834.2371.65809.sendpatchset@ahunter-laptop>
>From f1228758121aab11ba2265f2c6fe37f65b3aae03 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Fri, 22 May 2009 16:53:49 +0300
Subject: [PATCH] omap_hsmmc: protect the card when the cover is open
Depending on the manufacturer, there is a small possibility that
removing a card while it is being written to, can render the
card permanently unusable. To prevent that, the card is made
inaccessible when the cover is open.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
drivers/mmc/host/omap_hsmmc.c | 63 +++++++++++++++++++++++++++++++++++++++-
1 files changed, 61 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index c2b334d..32d5aef 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -165,6 +165,8 @@ struct omap_hsmmc_host {
int context_loss;
int dpm_state;
int vdd;
+ int protect_card;
+ int reqs_blocked;
struct omap_mmc_platform_data *pdata;
};
@@ -349,6 +351,9 @@ static void send_init_stream(struct omap_hsmmc_host *host)
int reg = 0;
unsigned long timeout;
+ if (host->protect_card)
+ return;
+
disable_irq(host->irq);
OMAP_HSMMC_WRITE(host->base, CON,
OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
@@ -779,6 +784,30 @@ err:
return ret;
}
+/* Protect the card while the cover is open */
+static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
+{
+ if (!mmc_slot(host).get_cover_state)
+ return;
+
+ host->reqs_blocked = 0;
+ if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
+ if (host->protect_card) {
+ printk(KERN_INFO "%s: cover is closed, "
+ "card is now accessible\n",
+ mmc_hostname(host->mmc));
+ host->protect_card = 0;
+ }
+ } else {
+ if (!host->protect_card) {
+ printk(KERN_INFO "%s: cover is open, "
+ "card is now inaccessible\n",
+ mmc_hostname(host->mmc));
+ host->protect_card = 1;
+ }
+ }
+}
+
/*
* Work Item to notify the core about card insertion/removal
*/
@@ -796,8 +825,10 @@ static void omap_hsmmc_detect(struct work_struct *work)
if (slot->card_detect)
carddetect = slot->card_detect(slot->card_detect_irq);
- else
+ else {
+ omap_hsmmc_protect_card(host);
carddetect = -ENOSYS;
+ }
if (carddetect) {
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
@@ -1033,8 +1064,32 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
* interrupts, but not if we are already in interrupt context i.e.
* retries.
*/
- if (!in_interrupt())
+ if (!in_interrupt()) {
spin_lock_irqsave(&host->irq_lock, host->flags);
+ /*
+ * Protect the card from I/O if there is a possibility
+ * it can be removed.
+ */
+ if (host->protect_card) {
+ if (host->reqs_blocked < 3) {
+ /*
+ * Ensure the controller is left in a consistent
+ * state by resetting the command and data state
+ * machines.
+ */
+ omap_hsmmc_reset_controller_fsm(host, SRD);
+ omap_hsmmc_reset_controller_fsm(host, SRC);
+ host->reqs_blocked += 1;
+ }
+ req->cmd->error = -EBADF;
+ if (req->data)
+ req->data->error = -EBADF;
+ spin_unlock_irqrestore(&host->irq_lock, host->flags);
+ mmc_request_done(mmc, req);
+ return;
+ } else if (host->reqs_blocked)
+ host->reqs_blocked = 0;
+ }
WARN_ON(host->mrq != NULL);
host->mrq = req;
err = omap_hsmmc_prepare_data(host, req);
@@ -1728,6 +1783,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
mmc_host_lazy_disable(host->mmc);
+ omap_hsmmc_protect_card(host);
+
mmc_add_host(mmc);
if (mmc_slot(host).name != NULL) {
@@ -1893,6 +1950,8 @@ static int omap_hsmmc_resume(struct platform_device *pdev)
"Unmask interrupt failed\n");
}
+ omap_hsmmc_protect_card(host);
+
/* Notify the core to resume the host */
ret = mmc_resume_host(host->mmc);
if (ret == 0)
--
1.5.6.3
next prev parent reply other threads:[~2009-07-28 10:42 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-28 10:38 [PATCH V2 0/32] mmc and omap_hsmmc patches Adrian Hunter
2009-07-28 10:38 ` [PATCH V2 1/32] mmc: add 'enable' and 'disable' methods to mmc host Adrian Hunter
2009-07-28 10:38 ` [PATCH V2 2/32] mmc: allow host claim / release nesting Adrian Hunter
2009-07-28 10:38 ` [PATCH V2 3/32] mmc: add MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 4/32] mmc: add ability to save power by powering off cards Adrian Hunter
2009-07-30 1:05 ` Madhusudhan
2009-07-30 7:16 ` Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 5/32] mmc: add mmc card sleep and awake support Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 6/32] mmc: power off once at removal Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 7/32] mmc: add host capabilities for SD only and MMC only Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 8/32] mmc: check status after MMC SWITCH command Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 9/32] omap_hsmmc: add debugfs entry (host registers) Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 10/32] omap_hsmmc: make use of new enable/disable interface Adrian Hunter
2009-07-28 10:39 ` [PATCH V2 11/32] ARM: OMAP: mmc-twl4030: add context loss counter support Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 12/32] omap_hsmmc: keep track of power mode Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 13/32] omap_hsmmc: context save/restore support Adrian Hunter
2009-07-30 2:00 ` Madhusudhan
2009-07-30 7:40 ` Adrian Hunter
2009-07-30 19:12 ` Madhusudhan
2009-07-30 19:33 ` Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 14/32] omap_hsmmc: set open drain bit correctly Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 15/32] omap_hsmmc: ensure workqueues are empty before suspend Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 16/32] omap_hsmmc: fix scatter-gather list sanity checking Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 17/32] omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 18/32] omap_hsmmc: support for deeper power saving states Adrian Hunter
2009-07-28 10:40 ` [PATCH V2 19/32] ARM: OMAP: mmc-twl4030: add regulator sleep / wake function Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 20/32] omap_hsmmc: put MMC regulator to sleep Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 21/32] omap_hsmmc: add mmc card sleep and awake support Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 22/32] omap_hsmmc: fix NULL pointer dereference Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 23/32] omap_hsmmc: cleanup macro usage Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 24/32] omap_hsmmc: clear interrupt status after init sequence Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 25/32] omap_hsmmc: cater for weird CMD6 behaviour Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 26/32] omap_hsmmc: prevent races with irq handler Adrian Hunter
2009-07-28 10:41 ` [PATCH V2 27/32] omap_hsmmc: pass host capabilities for SD only and MMC only Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 28/32] omap_hsmmc: code refactoring Adrian Hunter
2009-07-28 10:42 ` Adrian Hunter [this message]
2009-07-28 10:42 ` [PATCH V2 30/32] omap_hsmmc: ensure all clock enables and disables are paired Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 31/32] omap_hsmmc: set a large data timeout for commands with busy signal Adrian Hunter
2009-07-28 10:42 ` [PATCH V2 32/32] ARM: OMAP: RX51: set MMC capabilities and power-saving flag Adrian Hunter
2009-07-29 11:13 ` [PATCH V2 0/32] mmc and omap_hsmmc patches Matt Fleming
2009-07-31 0:52 ` Madhusudhan
2009-08-13 15:27 ` Madhusudhan
2009-08-13 16:29 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090728104208.2371.2569.sendpatchset@ahunter-laptop \
--to=adrian.hunter@nokia.com \
--cc=akpm@linux-foundation.org \
--cc=ext-denis.2.karpov@nokia.com \
--cc=jarkko.lavinen@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=matt@console-pimps.org \
--cc=pierre@ossman.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox