[PATCH 0/5] Few more omap fixes for 2.6.31

[PATCH 0/5] Few more omap fixes for 2.6.31

[Tony Lindgren]

Hi all,

Here are few more fixes for omap for review.

Regards,

Tony

---

Janboe Ye (1):
      OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size

Roger Quadros (2):
      OMAP3: RX51: Define TWL4030 USB transceiver in board file
      OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs

Sergio Aguirre (1):
      OMAP3: Overo: Fix smsc911x platform device resource value

Vikram Pandita (1):
      OMAP2/3: DMA errata correction


 arch/arm/mach-omap2/board-overo.c            |    2 -
 arch/arm/mach-omap2/board-rx51-peripherals.c |    5 ++
 arch/arm/plat-omap/dma.c                     |    4 +-
 arch/arm/plat-omap/gpio.c                    |   68 ++++++++++++++++++++++++--
 arch/arm/plat-omap/sram.c                    |    4 +-
 5 files changed, 75 insertions(+), 8 deletions(-)

-- 
Signature

[PATCH 1/5] OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs

[Tony Lindgren]

From: Roger Quadros <ext-roger.quadros@nokia.com>

gpio_get() should return DATAIN register value when the GPIO
is configured as input whereas it should return DATAOUT register
value when the GPIO is configured as output.
Now /sys/kernel/debug/gpio shows proper values for output GPIOs

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c |   68 ++++++++++++++++++++++++++++++++++++++++++---
 1 files changed, 64 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c..e702b88 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-	struct gpio_bank *bank;
 	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
 			& (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set)	\
 do {	\
 	int l = __raw_readl(base + reg); \
@@ -1350,9 +1395,24 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask);
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __omap_get_gpio_datain(chip->base + offset);
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)

Re: [PATCH 1/5] OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs, v3

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 84 bytes --]

Here's an update from Roger for this one that builds without
CONFIG_DEBUG_FS.

Tony

[-- Attachment #2: gpio-data-v3.patch --]
[-- Type: text/x-diff, Size: 4331 bytes --]

>From b37c45b8c27c049dc44673e40fd63820fd9a9d91 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Wed, 5 Aug 2009 16:53:24 +0300
Subject: [PATCH] OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs

gpio_get() should return DATAIN register value when the GPIO
is configured as input whereas it should return DATAOUT register
value when the GPIO is configured as output.
Now /sys/kernel/debug/gpio shows proper values for output GPIOs

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c..9c16ca8 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-	struct gpio_bank *bank;
 	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
 			& (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set)	\
 do {	\
 	int l = __raw_readl(base + reg); \
@@ -1350,9 +1395,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+	}
+	return __raw_readl(reg) & mask;
+}
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __omap_get_gpio_datain(chip->base + offset);
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1886,34 +1971,6 @@ arch_initcall(omap_gpio_sysinit);
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
-		break;
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-	}
-	return __raw_readl(reg) & mask;
-}
-
-
 static int dbg_gpio_show(struct seq_file *s, void *unused)
 {
 	unsigned	i, j, gpio;

[PATCH 2/5] OMAP2/3: DMA errata correction

[Tony Lindgren]

From: Vikram Pandita <vikram.pandita@ti.com>

This errata is valid for:
OMAP2420 Errata 1.85 Impacts all 2420 ES rev
OMAP2430 Errata 1.10 Impacts only ES1.0
Description: DMA may hang when several channels are used in parallel
OMAP3430: Not impacted, so remove the errata fix for omap3

Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Reviewed-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7677a4a..e3ac94f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -946,7 +946,9 @@ void omap_start_dma(int lch)
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-	} else if (cpu_class_is_omap2()) {
+	} else if (cpu_is_omap242x() ||
+		(cpu_is_omap243x() &&  omap_type() <= OMAP2430_REV_ES1_0)) {
+
 		/* Errata: Need to write lch even if not using chaining */
 		dma_write(lch, CLNK_CTRL(lch));
 	}

[PATCH 1.5/5] OMAP: Fix testing of cpu defines for mach-omap1

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 136 bytes --]

Looks like this is needed before the 2/5 patch for DMA workaround patch to
keep compile working on mach-omap1 machines.

Regards,

Tony

[-- Attachment #2: cpu-remove-ifdef.patch --]
[-- Type: text/x-diff, Size: 1246 bytes --]

>From f60e4730feab2b3d0101d059534123e04fc26862 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 10 Aug 2009 14:04:15 +0300
Subject: [PATCH] OMAP: Fix testing of cpu defines for mach-omap1

There's no need to keep these defines limited in the ifdef block
for mach-omap2. It will just cause problems testing for the CPU
revision in the common code, like the next patch does for the DMA
errata.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 285eaa3..11e73d9 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
 				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
-
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
 #define OMAP2420_REV_ES1_0	0x24200024
@@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */

[PATCH 3/5] OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size

[Tony Lindgren]

From: Janboe Ye <yuan-bo.ye@motorola.com>

commit e85c205ac1427f2405021a36f083280ff0d0a35e increase vmalloc size.
vmalloc space will overlap with OMAP3 sram virtual address.

Signed-off-by: Li Hong Mei <hong-mei.li@motorola.com>
Signed-off-by: Janboe Ye <yuan-bo.ye@motorola.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/sram.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4ea7380..2890b11 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -44,9 +44,9 @@
 #define OMAP2_SRAM_VA		0xe3000000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_VA           0xe3000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
-#define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
 #define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
 #define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 

[PATCH 4/5] OMAP3: Overo: Fix smsc911x platform device resource value

[Tony Lindgren]

From: Sergio Aguirre <saaguirre@ti.com>

Fixes a wrong setting of resource parameter list in
SMSC911x platform driver data structure for Overo case.

This fixes folowing warning when compiling for Overo board:

	warning: initialization from incompatible pointer type

Introduced since commit id:
	commit 172ef275444efa12d834fb9d1b1acdac92db47f7
	Author: Steve Sakoman <sakoman@gmail.com>
	Date:   Mon Feb 2 06:27:49 2009 +0000

	    ARM: Add SMSC911X support to Overo platform (V2)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-overo.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528..fec1bb1 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -146,7 +146,7 @@ static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
-	.resource	= &overo_smsc911x_resources,
+	.resource	= overo_smsc911x_resources,
 	.dev		= {
 		.platform_data = &overo_smsc911x_config,
 	},

[PATCH 5/5] OMAP3: RX51: Define TWL4030 USB transceiver in board file

[Tony Lindgren]

From: Roger Quadros <ext-roger.quadros@nokia.com>

Add OTG transceiver to RX51 platform data to prevent kernel NULL pointer
dereference during MUSB initialisation.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a0bf67..56d931a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
 
+static struct twl4030_usb_data rx51_usb_data = {
+	.usb_mode		= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data rx51_twldata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
@@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
+	.usb			= &rx51_usb_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,

[PATCH 5/5] OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 37 bytes --]

One more patch I missed below.

Tony

[-- Attachment #2: mmc-free-regulators.patch --]
[-- Type: text/x-diff, Size: 1350 bytes --]

>From 8b28d125dcfa4a250a897baa2425d1f30dd56219 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Thu, 6 Aug 2009 09:49:18 +0300
Subject: [PATCH] OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up

twl_mmc_cleanup() must free up the regulators that were
allocated by twl_mmc_late_init().
This eliminates the below error when 'omap_hsmmc' module is
repeatedly loaded and unloaded.

"sysfs: cannot create duplicate filename '/devices/platform
 /mmci-omap-hs.0/microamps_requested_vmmc'"

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 1541fd4..3c04c2f 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev)
 				if (i != 0)
 					break;
 				ret = PTR_ERR(reg);
+				hsmmc[i].vcc = NULL;
 				goto err;
 			}
 			hsmmc[i].vcc = reg;
@@ -165,8 +166,13 @@ done:
 static void twl_mmc_cleanup(struct device *dev)
 {
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
 
 	gpio_free(mmc->slots[0].switch_pin);
+	for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		regulator_put(hsmmc[i].vcc);
+		regulator_put(hsmmc[i].vcc_aux);
+	}
 }
 
 #ifdef CONFIG_PM

Re: [PATCH 6/5] OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [090806 09:53]:
> One more patch I missed below.

And it should be numbered 6/5, not 5/5.

Tony

[PATCH 7/5] OMAP3: RX51: Updated rx51_defconfig

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 22 bytes --]

Just one more..

Tony

[-- Attachment #2: rx51-boots.patch --]
[-- Type: text/x-diff, Size: 1652 bytes --]

>From a46c20070f08759cfbd42c05fe7debb178d896cb Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Thu, 6 Aug 2009 11:07:46 +0300
Subject: [PATCH] OMAP3: RX51: Updated rx51_defconfig

Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots.

Note that the regulator code should be moved from mmc-twl4030.c
to omap_hsmmc.c so it can be a module.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index eb2cb31..f238df6 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 

Git pull request for omap fixes for 2.6.31

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 52 bytes --]

Hi Russell,

Here's the pull request for you.

Tony

[-- Attachment #2: pull.txt --]
[-- Type: text/plain, Size: 1234 bytes --]

The following changes since commit ed680c4ad478d0fee9740f7d029087f181346564:
  Linus Torvalds (1):
        Linux 2.6.31-rc5

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-fixes

Janboe Ye (1):
      OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size

Roger Quadros (4):
      OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs
      OMAP3: RX51: Define TWL4030 USB transceiver in board file
      OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up
      OMAP3: RX51: Updated rx51_defconfig

Sergio Aguirre (1):
      OMAP3: Overo: Fix smsc911x platform device resource value

Vikram Pandita (1):
      OMAP2/3: DMA errata correction

 arch/arm/configs/rx51_defconfig              |    7 ++-
 arch/arm/mach-omap2/board-overo.c            |    2 +-
 arch/arm/mach-omap2/board-rx51-peripherals.c |    5 ++
 arch/arm/mach-omap2/mmc-twl4030.c            |    6 ++
 arch/arm/plat-omap/dma.c                     |    4 +-
 arch/arm/plat-omap/gpio.c                    |   68 ++++++++++++++++++++++++--
 arch/arm/plat-omap/sram.c                    |    4 +-
 7 files changed, 85 insertions(+), 11 deletions(-)

Re: Git pull request for omap fixes for 2.6.31

[Russell King - ARM Linux]

On Fri, Aug 07, 2009 at 12:01:48PM +0300, Tony Lindgren wrote:
> Here's the pull request for you.

I'll hold off merging this for a bit - I've sent Linus two pull requests
over the last couple of weeks, both of which so far haven't produced a
reaction. It would be unfair for me to merge more stuff onto that branch
until Linus has pulled.

Re: Git pull request for omap fixes for 2.6.31

[Tony Lindgren]

* Russell King - ARM Linux <linux@arm.linux.org.uk> [090807 12:06]:
> On Fri, Aug 07, 2009 at 12:01:48PM +0300, Tony Lindgren wrote:
> > Here's the pull request for you.
> 
> I'll hold off merging this for a bit - I've sent Linus two pull requests
> over the last couple of weeks, both of which so far haven't produced a
> reaction. It would be unfair for me to merge more stuff onto that branch
> until Linus has pulled.

OK thanks.

Tony

Git pull request for omap fixes for 2.6.31, v2

[Tony Lindgren]

[-- Attachment #1: Type: text/plain, Size: 668 bytes --]

* Tony Lindgren <tony@atomide.com> [090807 12:14]:
> * Russell King - ARM Linux <linux@arm.linux.org.uk> [090807 12:06]:
> > On Fri, Aug 07, 2009 at 12:01:48PM +0300, Tony Lindgren wrote:
> > > Here's the pull request for you.
> > 
> > I'll hold off merging this for a bit - I've sent Linus two pull requests
> > over the last couple of weeks, both of which so far haven't produced a
> > reaction. It would be unfair for me to merge more stuff onto that branch
> > until Linus has pulled.
> 
> OK thanks.

Looks like I did not test this series enough.. I've updated it now for the
two patches as posted here earlier today. Updated pull request below.

Regards,

Tony


[-- Attachment #2: pull.txt --]
[-- Type: text/plain, Size: 1362 bytes --]

The following changes since commit ed680c4ad478d0fee9740f7d029087f181346564:
  Linus Torvalds (1):
        Linux 2.6.31-rc5

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-fixes

Janboe Ye (1):
      OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size

Roger Quadros (4):
      OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs
      OMAP3: RX51: Define TWL4030 USB transceiver in board file
      OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up
      OMAP3: RX51: Updated rx51_defconfig

Sergio Aguirre (1):
      OMAP3: Overo: Fix smsc911x platform device resource value

Tony Lindgren (1):
      OMAP: Fix testing of cpu defines for mach-omap1

Vikram Pandita (1):
      OMAP2/3: DMA errata correction

 arch/arm/configs/rx51_defconfig              |    7 +-
 arch/arm/mach-omap2/board-overo.c            |    2 +-
 arch/arm/mach-omap2/board-rx51-peripherals.c |    5 +
 arch/arm/mach-omap2/mmc-twl4030.c            |    6 ++
 arch/arm/plat-omap/dma.c                     |    4 +-
 arch/arm/plat-omap/gpio.c                    |  121 +++++++++++++++++++-------
 arch/arm/plat-omap/include/mach/cpu.h        |    5 -
 arch/arm/plat-omap/sram.c                    |    4 +-
 8 files changed, 110 insertions(+), 44 deletions(-)