[PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[Vikram Pandita]

Pass irqflags to 8250 driver from zoom2 board file
Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq

This patch is dependent on 8250 driver changes getting accepted upstream:
Refer: http://patchwork.kernel.org/patch/31884/

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
---

Warning: 
could cause compilation break if 8250 patch is not integrated first

 arch/arm/mach-omap2/board-zoom-debugboard.c |    2 ++
 arch/arm/mach-omap2/serial.c                |    2 +-
 2 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bac5c43..f546063 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/gpmc.h>
 
@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x10000000,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
 		.iotype		= UPIO_MEM,
 		.regshift	= 1,
 		.uartclk	= QUART_CLK,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15..45d4884 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -429,7 +429,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		omap_ctrl_writew(v, uart->padconf);
 	}
 
-	p->flags |= UPF_SHARE_IRQ;
+	p->irqflags |= IRQF_SHARED;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
-- 
1.6.0.3.613.g9f8f13

Re: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[Tony Lindgren]

* Vikram Pandita <vikram.pandita@ti.com> [090623 02:29]:
> Pass irqflags to 8250 driver from zoom2 board file
> Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq
> 
> This patch is dependent on 8250 driver changes getting accepted upstream:
> Refer: http://patchwork.kernel.org/patch/31884/

FYI, I'll archive this for now, please resubmit once the related changes
are integrated. Or if resubmitting the related changes, please submit this
too via the serial list.

Acked-by: Tony Lindgren <tony@atomide.com>

 
> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
> ---
> 
> Warning: 
> could cause compilation break if 8250 patch is not integrated first
> 
>  arch/arm/mach-omap2/board-zoom-debugboard.c |    2 ++
>  arch/arm/mach-omap2/serial.c                |    2 +-
>  2 files changed, 3 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
> index bac5c43..f546063 100644
> --- a/arch/arm/mach-omap2/board-zoom-debugboard.c
> +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
> @@ -12,6 +12,7 @@
>  #include <linux/gpio.h>
>  #include <linux/serial_8250.h>
>  #include <linux/smsc911x.h>
> +#include <linux/interrupt.h>
>  
>  #include <mach/gpmc.h>
>  
> @@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
>  		.mapbase	= 0x10000000,
>  		.irq		= OMAP_GPIO_IRQ(102),
>  		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
> +		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
>  		.iotype		= UPIO_MEM,
>  		.regshift	= 1,
>  		.uartclk	= QUART_CLK,
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index b094c15..45d4884 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -429,7 +429,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
>  		omap_ctrl_writew(v, uart->padconf);
>  	}
>  
> -	p->flags |= UPF_SHARE_IRQ;
> +	p->irqflags |= IRQF_SHARED;
>  	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
>  			  "serial idle", (void *)uart);
>  	WARN_ON(ret);
> -- 
> 1.6.0.3.613.g9f8f13
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[Pandita, Vikram]

>-----Original Message-----
>From: Tony Lindgren [mailto:tony@atomide.com]
>Sent: Monday, August 10, 2009 11:39 AM
>To: Pandita, Vikram
>Cc: linux-omap@vger.kernel.org
>Subject: Re: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver
>
>* Vikram Pandita <vikram.pandita@ti.com> [090623 02:29]:
>> Pass irqflags to 8250 driver from zoom2 board file
>> Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq
>>
>> This patch is dependent on 8250 driver changes getting accepted upstream:
>> Refer: http://patchwork.kernel.org/patch/31884/
>
>FYI, I'll archive this for now, please resubmit once the related changes
>are integrated. Or if resubmitting the related changes, please submit this
>too via the serial list.

Looks like the dependency patch is already in linux-next tree at [1].
The dependency patch is already lined up stream. 

So looks like you can line this irqflag change for zoom2.

[1] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7

>
>Acked-by: Tony Lindgren <tony@atomide.com>
>
>
>> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
>> ---
>>
>> Warning:
>> could cause compilation break if 8250 patch is not integrated first
>>
>>  arch/arm/mach-omap2/board-zoom-debugboard.c |    2 ++
>>  arch/arm/mach-omap2/serial.c                |    2 +-
>>  2 files changed, 3 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-
>debugboard.c
>> index bac5c43..f546063 100644
>> --- a/arch/arm/mach-omap2/board-zoom-debugboard.c
>> +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
>> @@ -12,6 +12,7 @@
>>  #include <linux/gpio.h>
>>  #include <linux/serial_8250.h>
>>  #include <linux/smsc911x.h>
>> +#include <linux/interrupt.h>
>>
>>  #include <mach/gpmc.h>
>>
>> @@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
>>  		.mapbase	= 0x10000000,
>>  		.irq		= OMAP_GPIO_IRQ(102),
>>  		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
>> +		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
>>  		.iotype		= UPIO_MEM,
>>  		.regshift	= 1,
>>  		.uartclk	= QUART_CLK,
>> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
>> index b094c15..45d4884 100644
>> --- a/arch/arm/mach-omap2/serial.c
>> +++ b/arch/arm/mach-omap2/serial.c
>> @@ -429,7 +429,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
>>  		omap_ctrl_writew(v, uart->padconf);
>>  	}
>>
>> -	p->flags |= UPF_SHARE_IRQ;
>> +	p->irqflags |= IRQF_SHARED;
>>  	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
>>  			  "serial idle", (void *)uart);
>>  	WARN_ON(ret);
>> --
>> 1.6.0.3.613.g9f8f13
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[Tony Lindgren]

* Pandita, Vikram <vikram.pandita@ti.com> [090810 23:20]:
> 
> 
> >-----Original Message-----
> >From: Tony Lindgren [mailto:tony@atomide.com]
> >Sent: Monday, August 10, 2009 11:39 AM
> >To: Pandita, Vikram
> >Cc: linux-omap@vger.kernel.org
> >Subject: Re: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver
> >
> >* Vikram Pandita <vikram.pandita@ti.com> [090623 02:29]:
> >> Pass irqflags to 8250 driver from zoom2 board file
> >> Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq
> >>
> >> This patch is dependent on 8250 driver changes getting accepted upstream:
> >> Refer: http://patchwork.kernel.org/patch/31884/
> >
> >FYI, I'll archive this for now, please resubmit once the related changes
> >are integrated. Or if resubmitting the related changes, please submit this
> >too via the serial list.
> 
> Looks like the dependency patch is already in linux-next tree at [1].
> The dependency patch is already lined up stream. 
> 
> So looks like you can line this irqflag change for zoom2.

OK, thanks, will queue to omap3-upstream queue.

Tony

> 
> [1] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7
> 
> >
> >Acked-by: Tony Lindgren <tony@atomide.com>
> >
> >
> >> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
> >> ---
> >>
> >> Warning:
> >> could cause compilation break if 8250 patch is not integrated first
> >>
> >>  arch/arm/mach-omap2/board-zoom-debugboard.c |    2 ++
> >>  arch/arm/mach-omap2/serial.c                |    2 +-
> >>  2 files changed, 3 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-
> >debugboard.c
> >> index bac5c43..f546063 100644
> >> --- a/arch/arm/mach-omap2/board-zoom-debugboard.c
> >> +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
> >> @@ -12,6 +12,7 @@
> >>  #include <linux/gpio.h>
> >>  #include <linux/serial_8250.h>
> >>  #include <linux/smsc911x.h>
> >> +#include <linux/interrupt.h>
> >>
> >>  #include <mach/gpmc.h>
> >>
> >> @@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
> >>  		.mapbase	= 0x10000000,
> >>  		.irq		= OMAP_GPIO_IRQ(102),
> >>  		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
> >> +		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
> >>  		.iotype		= UPIO_MEM,
> >>  		.regshift	= 1,
> >>  		.uartclk	= QUART_CLK,
> >> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> >> index b094c15..45d4884 100644
> >> --- a/arch/arm/mach-omap2/serial.c
> >> +++ b/arch/arm/mach-omap2/serial.c
> >> @@ -429,7 +429,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
> >>  		omap_ctrl_writew(v, uart->padconf);
> >>  	}
> >>
> >> -	p->flags |= UPF_SHARE_IRQ;
> >> +	p->irqflags |= IRQF_SHARED;
> >>  	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
> >>  			  "serial idle", (void *)uart);
> >>  	WARN_ON(ret);
> >> --
> >> 1.6.0.3.613.g9f8f13
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> >> the body of a message to majordomo@vger.kernel.org
> >> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

RE: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[Pandita, Vikram]

tony

>-----Original Message-----
>From: Pandita, Vikram
>>-----Original Message-----
>>From: Tony Lindgren [mailto:tony@atomide.com]
>>Subject: Re: [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver
>>
>>* Vikram Pandita <vikram.pandita@ti.com> [090623 02:29]:
>>> Pass irqflags to 8250 driver from zoom2 board file
>>> Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq
>>>
>>> This patch is dependent on 8250 driver changes getting accepted upstream:
>>> Refer: http://patchwork.kernel.org/patch/31884/
>>
>>FYI, I'll archive this for now, please resubmit once the related changes
>>are integrated. Or if resubmitting the related changes, please submit this
>>too via the serial list.
>
>Looks like the dependency patch is already in linux-next tree at [1].
>The dependency patch is already lined up stream.
>
>So looks like you can line this irqflag change for zoom2.
>
>[1] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-
>next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7
>
>>
>>Acked-by: Tony Lindgren <tony@atomide.com>

Would you be able to line this zoom2 patch as well in your omap3-boards branch?
This patch is missing from your branch.

>>
>>
>>> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
>>> ---
>>>
>>> Warning:
>>> could cause compilation break if 8250 patch is not integrated first
>>>
>>>  arch/arm/mach-omap2/board-zoom-debugboard.c |    2 ++
>>>  arch/arm/mach-omap2/serial.c                |    2 +-
>>>  2 files changed, 3 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-
>>debugboard.c
>>> index bac5c43..f546063 100644
>>> --- a/arch/arm/mach-omap2/board-zoom-debugboard.c
>>> +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
>>> @@ -12,6 +12,7 @@
>>>  #include <linux/gpio.h>
>>>  #include <linux/serial_8250.h>
>>>  #include <linux/smsc911x.h>
>>> +#include <linux/interrupt.h>
>>>
>>>  #include <mach/gpmc.h>
>>>
>>> @@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
>>>  		.mapbase	= 0x10000000,
>>>  		.irq		= OMAP_GPIO_IRQ(102),
>>>  		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
>>> +		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
>>>  		.iotype		= UPIO_MEM,
>>>  		.regshift	= 1,
>>>  		.uartclk	= QUART_CLK,
>>> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
>>> index b094c15..45d4884 100644
>>> --- a/arch/arm/mach-omap2/serial.c
>>> +++ b/arch/arm/mach-omap2/serial.c
>>> @@ -429,7 +429,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
>>>  		omap_ctrl_writew(v, uart->padconf);
>>>  	}
>>>
>>> -	p->flags |= UPF_SHARE_IRQ;
>>> +	p->irqflags |= IRQF_SHARED;
>>>  	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
>>>  			  "serial idle", (void *)uart);
>>>  	WARN_ON(ret);
>>> --
>>> 1.6.0.3.613.g9f8f13
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[APPLIED] [PATCH v2] OMAP2: Zoom2: Pass irqflags to 8250 driver

[Tony Lindgren]

This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Branch in linux-omap: omap3-upstream

Initial commit ID (Likely to change): 577736be2190198b88c9f3868b75f8de3b98e3e6

PatchWorks
http://patchwork.kernel.org/patch/31888/

Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=577736be2190198b88c9f3868b75f8de3b98e3e6