Re: MUSB regression in 2.6.31-rc6

[Felipe Balbi <felipe.balbi@nokia.com>]

On Sat, Aug 15, 2009 at 05:07:01PM +0200, ext Jarkko Nikula wrote:
> On Sat, 15 Aug 2009 20:19:17 +0530
> "Gadiyar, Anand" <gadiyar@ti.com> wrote:
> 
> > > diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
> > > index 803adcb..e27ed96 100644
> > > --- a/drivers/usb/musb/Kconfig
> > > +++ b/drivers/usb/musb/Kconfig
> > > @@ -13,6 +13,7 @@ config USB_MUSB_HDRC
> > >         select NOP_USB_XCEIV if ARCH_DAVINCI
> > >         select TWL4030_USB if MACH_OMAP_3430SDP
> > >         select NOP_USB_XCEIV if MACH_OMAP3EVM
> > > +       select NOP_USB_XCEIV if MACH_OMAP3_BEAGLE
> > 
> > Shouldn't we be selecting TWL4030_USB if MACH_OMAP3_BEAGLE.
> > The beagleboard does use the PHY in the TWL4030, and not
> > a transparent PHY.
> > 
> Could be. I have no very much idea of these :-)
> 
> I happened to have both of these below enabled and 2.6.31-rc5 was still
> booting.
> 
> CONFIG_TWL4030_USB=y
> CONFIG_NOP_USB_XCEIV=y
> 
> But anyway, I don't get Beagle booting with 2.6.31-rc6 if I disable any
> of them and IRCC another oops will follow if both are disabled.

There's a patch from me adding back the twl4030_usb pdata to beagle
board-file and another one from Paul which changed the defconfig.

It should be easy to find on the archives. Eduardo Valentin reported
that to me so I was asking him to test the stuff for me.

-- 
balbi