From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jarkko Nikula Subject: Re: Audio capture not working with AIC23/McBSP1 on OMAP3517 Date: Fri, 28 Aug 2009 13:51:03 +0300 Message-ID: <20090828135103.63ca2343.jhnikula@gmail.com> References: <5A47E75E594F054BAF48C5E4FC4B92AB0309E9D82D@dbde02.ent.ti.com> <5A47E75E594F054BAF48C5E4FC4B92AB0309E9DB24@dbde02.ent.ti.com> <20090827141253.9f772f31.jhnikula@gmail.com> <200908280955.01382.peter.ujfalusi@nokia.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200908280955.01382.peter.ujfalusi@nokia.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Peter Ujfalusi Cc: "Aggarwal, Anuj" , "alsa-devel@alsa-project.org" , Mark Brown , "linux-omap@vger.kernel.org" List-Id: linux-omap@vger.kernel.org On Fri, 28 Aug 2009 09:55:01 +0300 Peter Ujfalusi wrote: > > Can you, Peter or who has access to 2420 and 2430 TRMs to verify is the > > DEVCONF0 bits 3 and 4 selecting there also the McBSP1 CLKR and FSR > > sources like my patch is now assuming for all OMAP2-3. > > On OMAP2: > DEVCONF:3 MCBSP1_CLKR > DEVCONF:4 MCBSP1_FSR > > So it is correct for both OMAP2 and OMAP3. > Good :-) Are you Mark fine with the patch [] where the snd_soc_dai_set_sysclk is used to specify source pin for CLKR and FSR? -- Jarkko 1. http://mailman.alsa-project.org/pipermail/alsa-devel/2009-August/020771.html