From: Tony Lindgren <tony@atomide.com>
To: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: linux-omap@vger.kernel.org, felipe.balbi@nokia.com, david-b@pacbell.net
Subject: Re: [PATCH 4/9] ehci: fix phy_reset init in ehci probe
Date: Mon, 21 Sep 2009 18:02:03 -0700 [thread overview]
Message-ID: <20090922010203.GI27699@atomide.com> (raw)
In-Reply-To: <1249560460-16306-4-git-send-email-ajay.gupta@ti.com>
* Ajay Kumar Gupta <ajay.gupta@ti.com> [090806 05:11]:
> phy_reset is not getting updated from platform_data.
Adding to ehci branch.
Tony
> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
> ---
> drivers/usb/host/ehci-omap.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index 0058f03..55e5259 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -33,7 +33,6 @@
> * - add suspend/resume
> * - move workarounds to board-files
> * - differentiate between ES2.x and ES3.x
> - * - make it enumerate devices
> */
>
> #include <linux/platform_device.h>
> @@ -590,6 +589,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, omap);
> omap->dev = &pdev->dev;
> + omap->phy_reset = pdata->phy_reset;
> omap->reset_gpio_port1 = pdata->reset_gpio_port1;
> omap->reset_gpio_port2 = pdata->reset_gpio_port2;
> omap->phy_mode = pdata->phy_mode;
> --
> 1.6.2.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-09-22 1:02 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-06 12:07 [PATCH 1/9] ehci: fix ehci pin mux init Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 2/9] ehci: adding mux pin for EHCI phy reset line Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 3/9] ehci: correct EHCI init parameters on OMAP3EVM Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 4/9] ehci: fix phy_reset init in ehci probe Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 5/9] ehci: increase timeout to fix ehci failure Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 6/9] ehci: portwise configurations Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 7/9] omap3: Add CHIP_GE_OMAP3430ES3 for HSUSB Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 8/9] ehci: Support for ES3.x Ajay Kumar Gupta
2009-08-06 12:07 ` [PATCH 9/9] ehci: update driver with generic change Ajay Kumar Gupta
2009-08-06 13:07 ` [PATCH 7/9] omap3: Add CHIP_GE_OMAP3430ES3 for HSUSB Felipe Balbi
2009-08-06 13:13 ` Tony Lindgren
2009-09-22 1:10 ` [PATCH 5/9] ehci: increase timeout to fix ehci failure Tony Lindgren
2009-09-22 13:10 ` Gupta, Ajay Kumar
2009-09-22 17:10 ` Tony Lindgren
2009-09-22 1:02 ` Tony Lindgren [this message]
2009-08-06 12:43 ` [PATCH 3/9] ehci: correct EHCI init parameters on OMAP3EVM Tony Lindgren
2009-08-07 9:06 ` Gupta, Ajay Kumar
2009-09-22 0:59 ` Tony Lindgren
2009-09-22 0:55 ` [PATCH 2/9] ehci: adding mux pin for EHCI phy reset line Tony Lindgren
2009-08-06 12:40 ` [PATCH 1/9] ehci: fix ehci pin mux init Tony Lindgren
2009-08-06 13:45 ` Gupta, Ajay Kumar
2009-08-06 14:02 ` Gadiyar, Anand
2009-08-06 14:31 ` Gupta, Ajay Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090922010203.GI27699@atomide.com \
--to=tony@atomide.com \
--cc=ajay.gupta@ti.com \
--cc=david-b@pacbell.net \
--cc=felipe.balbi@nokia.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox