From mboxrd@z Thu Jan 1 00:00:00 1970 From: Olof Johansson Subject: [PATCH] omap2: ehci: Make Overo compile again Date: Tue, 22 Sep 2009 10:04:14 -0500 Message-ID: <20090922150414.GA8975@lixom.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from lixom.net ([66.141.50.11]:56695 "EHLO mail.lixom.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756774AbZIVOsV (ORCPT ); Tue, 22 Sep 2009 10:48:21 -0400 Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: Ajay Kumar Gupta , tony@atomide.com Overo needs the same changes as the other boards do for the ehci changes. Signed-off-by: Olof Johansson diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 17f2318..3994974 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -384,6 +384,19 @@ static struct platform_device *overo_devices[] __initdata = { &overo_lcd_device, }; +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .chargepump = false, + .phy_reset = true, + .reset_gpio_port[0] = 183, + .reset_gpio_port[1] = -EINVAL, + .reset_gpio_port[2] = -EINVAL +}; + + static void __init overo_init(void) { overo_i2c_init(); @@ -391,7 +404,7 @@ static void __init overo_init(void) omap_serial_init(); overo_flash_init(); usb_musb_init(); - usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, 183, -EINVAL); + usb_ehci_init(&ehci_pdata); overo_ads7846_init(); overo_init_smsc911x();