public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Ladislav Michl <ladis@linux-mips.org>
Cc: linux-omap@vger.kernel.org,
	Alexander Shishkin <virtuoso@slind.org>,
	Kevin Hilman <khilman@deeprootsystems.com>
Subject: Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
Date: Tue, 20 Oct 2009 15:15:44 -0700	[thread overview]
Message-ID: <20091020221543.GL12576@atomide.com> (raw)
In-Reply-To: <20091020233115.GA7363@localhost.localdomain>

* Ladislav.Michl@seznam.cz <Ladislav.Michl@seznam.cz> [091020 14:53]:
> On Fri, Oct 09, 2009 at 06:46:23PM -0400, Tony Lindgren wrote:
> > This patch has been applied to the linux-omap
> > by youw fwiendly patch wobot.
> > 
> > Branch in linux-omap: omap2-upstream
> > 
> > Initial commit ID (Likely to change): 439d2c69335a28ffdb5a9795ff384b6755ca0f7f
> > 
> > PatchWorks
> > http://patchwork.kernel.org/patch/52477/
> > 
> > Git (Likely to change, and takes a while to get mirrored)
> > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=439d2c69335a28ffdb5a9795ff384b6755ca0f7f
> 
> This patch broke all OMAP1 boards. NULL terminator entry for omap1
> serial_platform_data cannot be removed just because serial driver uses
> is as last entry marker. Without it we end this way:
> Unable to handle kernel NULL pointer dereference at virtual address 00000028
> pgd = c0004000
> [00000028] *pgd=00000000
> Internal error: Oops: 80000005 [#1]
> last sysfs file:
> Modules linked in:
> CPU: 0    Not tainted  (2.6.32-rc5-06314-g4155da6-dirty #12)
> PC is at 0x28
> LR is at serial8250_config_port+0x184/0xc34
> (...etc...)
> 
> Please consider following fix (and while there fix OMAP2 too as patch broke
> it as well (untested))

Thanks, I already refreshed the original patch with the same fix few
days ago :) It should be there in for-next branch and master branch.

Tony
 
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> 
> diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
> index 9c59332..0392ff5 100644
> --- a/arch/arm/mach-omap1/serial.c
> +++ b/arch/arm/mach-omap1/serial.c
> @@ -86,7 +86,9 @@ static struct plat_serial8250_port serial_platform_data[] = {
>  		.iotype		= UPIO_MEM,
>  		.regshift	= 2,
>  		.uartclk	= OMAP16XX_BASE_BAUD * 16,
> -	},
> +	}, {
> +	}
> +
>  };
>  
>  static struct platform_device serial_device = {
> @@ -119,7 +121,7 @@ void __init omap_serial_init(void)
>  		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
>  	}
>  
> -	for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) {
> +	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
>  		unsigned char reg;
>  
>  		/* Static mapping, never released */
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index dabc089..ca69ffa 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -585,7 +585,7 @@ void __init omap_serial_early_init(void)
>  	 * if not needed.
>  	 */
>  
> -	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
> +	for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) {
>  		struct omap_uart_state *uart = &omap_uart[i];
>  		struct platform_device *pdev = &uart->pdev;
>  		struct device *dev = &pdev->dev;
> @@ -637,7 +637,7 @@ void __init omap_serial_init(void)
>  {
>  	int i;
>  
> -	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
> +	for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) {
>  		struct omap_uart_state *uart = &omap_uart[i];
>  		struct platform_device *pdev = &uart->pdev;
>  		struct device *dev = &pdev->dev;

  reply	other threads:[~2009-10-20 22:15 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-08  9:59 [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS virtuoso
2009-10-09 16:38 ` Kevin Hilman
2009-10-09 22:46 ` [APPLIED] " Tony Lindgren
2009-10-20 23:53   ` Ladislav.Michl
2009-10-20 22:15     ` Tony Lindgren [this message]
2009-10-20 23:01       ` Tony Lindgren
2009-10-21  0:40         ` Tony Lindgren
2009-10-21  9:48           ` Ladislav.Michl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091020221543.GL12576@atomide.com \
    --to=tony@atomide.com \
    --cc=khilman@deeprootsystems.com \
    --cc=ladis@linux-mips.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=virtuoso@slind.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox