Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards

Tony Lindgren
2009-12-03T20:19:08Z

* Vimal Singh <vimal.newwork@gmail.com> [091202 06:09]:
> >> >> From 8bc97108cf9c78216f1ea5407ccbd900e6b63dc2 Mon Sep 17 00:00:00 2001
> >> >> From: Vimal Singh <vimalsingh@ti.com>
> >> >> Date: Thu, 19 Nov 2009 19:28:11 +0530
> >> >>
> >> >> This patch series adds flash support for NAND (in sdp, zoom and ldp),
> >> >> OneNAND and NOR (in sdp)
> >> >>
> >> >> Tested on Zoom2 and 3430SDP
> >> >>
> >> >> Vimal Singh (4):
> >> >> [PATCH-v6 1/4] OMAP2/3: Add support for flash on SDP boards
> >> >> [PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards
> >> >> [PATCH-v6 3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig
> >> >> [PATCH-v6 4/4] OMAP: 3430SDP: Enable NAND in defconfig
> >> >
>
> I am going to re-post this patch series again and this time I have
> divided this into 3 (for more convenience in reviewing) . Something
> like this:
>
> 1st series:
> This patch series will introduce generic gpmc-nand.c for nand device
> related gpmc init.
>
> 2nd series:
> This patch series will introduce 'board-sdp-flash.c', for flash
> devices init on SDP
> boards. And will give an example of using 'gpmc-nand.c' and
> 'board-sdp-flash.c' by
> adding flash support to 3430SDP board.
>
> 3rd:
> This series introduces 'board-zoom-flash.c' for NAND init in ZOOM boards.
> Other patches will add NAND support for ZOOM2, ZOOM3 and LDP.
>
> Tony,
> Is it ok with you?

Sounds pretty good to me. Also the patches you just posted look
nice to me, will take a closer look. Thanks for doing the generic
gpmc-nand.c, that should make it a lot easier to bring up new
omap boards.

Regards,

Tony