* [PATCH 0/4] omap_udc fixes for omap7xx
@ 2009-10-05 14:48 Cory Maccarrone
2009-11-11 0:33 ` Tony Lindgren
0 siblings, 1 reply; 3+ messages in thread
From: Cory Maccarrone @ 2009-10-05 14:48 UTC (permalink / raw)
To: linux-omap
The following four patches patch the OMAP UDC subsystem to allow
omap7xx-based systems to operate with USB in client mode.
Cory Maccarrone (4):
[OMAP] Clocks: Add omap7xx-specific USB clock configuration
[OMAP] omap_udc: Updates for omap7xx IRQs and config
[OMAP] omap_udc: Add clocking and disable vbus sense for omap7xx
[OMAP1] Make ARCH_OMAP850 select ARCH_OMAP_OTG
arch/arm/mach-omap1/Kconfig | 1 +
arch/arm/mach-omap1/clock.c | 3 ++-
arch/arm/mach-omap1/clock.h | 10 ++++++++++
arch/arm/plat-omap/usb.c | 20 ++++++++++++++------
drivers/usb/gadget/omap_udc.c | 19 +++++++++++++++++--
5 files changed, 44 insertions(+), 9 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 0/4] omap_udc fixes for omap7xx
2009-10-05 14:48 [PATCH 0/4] omap_udc fixes for omap7xx Cory Maccarrone
@ 2009-11-11 0:33 ` Tony Lindgren
2009-11-14 18:16 ` Cory Maccarrone
0 siblings, 1 reply; 3+ messages in thread
From: Tony Lindgren @ 2009-11-11 0:33 UTC (permalink / raw)
To: Cory Maccarrone; +Cc: linux-omap
* Cory Maccarrone <darkstar6262@gmail.com> [091005 07:51]:
> The following four patches patch the OMAP UDC subsystem to allow
> omap7xx-based systems to operate with USB in client mode.
>
> Cory Maccarrone (4):
> [OMAP] Clocks: Add omap7xx-specific USB clock configuration
> [OMAP] omap_udc: Updates for omap7xx IRQs and config
> [OMAP] omap_udc: Add clocking and disable vbus sense for omap7xx
> [OMAP1] Make ARCH_OMAP850 select ARCH_OMAP_OTG
>
> arch/arm/mach-omap1/Kconfig | 1 +
> arch/arm/mach-omap1/clock.c | 3 ++-
> arch/arm/mach-omap1/clock.h | 10 ++++++++++
> arch/arm/plat-omap/usb.c | 20 ++++++++++++++------
> drivers/usb/gadget/omap_udc.c | 19 +++++++++++++++++--
Pushing these as a single patch to omap for-next today. Please
check and patch as needed.
BTW, had to unwrap some of these manually..
Tony
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 0/4] omap_udc fixes for omap7xx
2009-11-11 0:33 ` Tony Lindgren
@ 2009-11-14 18:16 ` Cory Maccarrone
0 siblings, 0 replies; 3+ messages in thread
From: Cory Maccarrone @ 2009-11-14 18:16 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap
On Tue, Nov 10, 2009 at 4:33 PM, Tony Lindgren <tony@atomide.com> wrote:
>
> * Cory Maccarrone <darkstar6262@gmail.com> [091005 07:51]:
> > The following four patches patch the OMAP UDC subsystem to allow
> > omap7xx-based systems to operate with USB in client mode.
> >
> > Cory Maccarrone (4):
> > [OMAP] Clocks: Add omap7xx-specific USB clock configuration
> > [OMAP] omap_udc: Updates for omap7xx IRQs and config
> > [OMAP] omap_udc: Add clocking and disable vbus sense for omap7xx
> > [OMAP1] Make ARCH_OMAP850 select ARCH_OMAP_OTG
> >
> > arch/arm/mach-omap1/Kconfig | 1 +
> > arch/arm/mach-omap1/clock.c | 3 ++-
> > arch/arm/mach-omap1/clock.h | 10 ++++++++++
> > arch/arm/plat-omap/usb.c | 20 ++++++++++++++------
> > drivers/usb/gadget/omap_udc.c | 19 +++++++++++++++++--
>
> Pushing these as a single patch to omap for-next today. Please
> check and patch as needed.
>
> BTW, had to unwrap some of these manually..
>
> Tony
This looks good, thanks! I'll need to investigate why the wrapping is
happening -- I've been using gmail on plain-text mode for this.
Perhaps I should use Evolution.
- Cory
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-11-14 18:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-05 14:48 [PATCH 0/4] omap_udc fixes for omap7xx Cory Maccarrone
2009-11-11 0:33 ` Tony Lindgren
2009-11-14 18:16 ` Cory Maccarrone
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox