Re: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E

[Tony Lindgren <tony@atomide.com>]

Hi,

* Ajay Kumar Gupta <ajay.gupta@ti.com> [091028 16:12]:
> OMAP3EVM (Rev >= E) has EHCI port on main board itself. Apart from this
> there is a slot to connect Mistral Daughter Card (MDC) to it which also
> has one EHCI port. Only one EHCI port can be used at a time and we can
> choose the port using GPIO61.
> 
> These are the new GPIO lines used for different purpose on EHCI interface.
> 	- GPIO21 - EHCI phy reset
> 	- GPIO22 - EHCI VBUS enable
> 	- GPIO61 - Selects EHCI port either on main board or on Mistral
> 	  Daughter Card (MDC).

Let's put this on hold until we have the new mux framework. Should be
trivial to do then.

Tony
 
> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
> 
> ---
> arch/arm/mach-omap2/mux.c             |    7 +++++++
>  arch/arm/plat-omap/include/plat/mux.h |    5 +++++
>  2 files changed, 12 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
> index 32c953e..00ad592 100644
> --- a/arch/arm/mach-omap2/mux.c
> +++ b/arch/arm/mach-omap2/mux.c
> @@ -551,6 +551,13 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
>  MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
>  		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
>  		OMAP34XX_MUX_MODE0)
> +/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
> +MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
> +	OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
> +	OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
> +	OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
>  };
>  
>  #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
> diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
> index f3c1d8a..8316d4f 100644
> --- a/arch/arm/plat-omap/include/plat/mux.h
> +++ b/arch/arm/plat-omap/include/plat/mux.h
> @@ -840,6 +840,11 @@ enum omap34xx_index {
>  
>  	/* SYS_NIRQ T2 INT1 */
>  	AF26_34XX_SYS_NIRQ,
> +
> +	/* EHCI GPIO's for OMAP3EVM (Rev >= E) */
> +	AH14_34XX_GPIO21,
> +	AF9_34XX_GPIO22,
> +	U3_34XX_GPIO61,
>  };
>  
>  struct omap_mux_cfg {