Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register

[Tony Lindgren <tony@atomide.com>]

* Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> [091116 15:13]:
> The patch corrects the issue introduced with my previous patch:
>         "OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set"
> as pointed out by OMAP subsystem maintainer.
> 
> Created and tested against linux-omap for-next,
> commit 155a75d9725e66e5ec8a383822957dee52427057
> 
> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
> 
> ---
> Monday 16 November 2009 23:25:18 Tony Lindgren wrote:
> > Oops, looks like this needs one more update. This breaks building
> > for mach-omap2 machines:
> >
> > arch/arm/plat-omap/dma.c: In function 'omap_dma_running':
> > arch/arm/plat-omap/dma.c:1132: error: 'OMAP_LCDC_CONTROL' undeclared (first
> > use in this function) arch/arm/plat-omap/dma.c:1132: error: (Each
> > undeclared identifier is reported only once arch/arm/plat-omap/dma.c:1132:
> > error: for each function it appears in.) arch/arm/plat-omap/dma.c:1132:
> > error: 'OMAP_LCDC_CTRL_LCD_EN' undeclared (first use in this function)
> >
> > So removing from omap for-next.
> 
> This time, compile tested with omap_generic_2420_defconfig as well.
> Once again, sorry for that noise :(.
> 
> Thanks,
> Janusz
> 
> diff -uprN a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
> --- a/arch/arm/mach-omap1/include/mach/lcdc.h	1970-01-01 01:00:00.000000000 +0100
> +++ b/arch/arm/mach-omap1/include/mach/lcdc.h	2009-11-16 21:13:33.000000000 +0100
> @@ -0,0 +1,59 @@
> +/*
> + * Heder file for OMAP1 internal LCD controller
> + *
> + * Extracted from drivers/video/omap/lcdc.c
> + *
> + * Copyright (C) 2004 Nokia Corporation
> + * Author: Imre Deak <imre.deak@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
> + */
> +
> +#ifndef __ARCH_OMAP_LCDC_H__
> +#define __ARCH_OMAP_LCDC_H__
> +
> +#define OMAP_LCDC_BASE			0xfffec000
> +#define OMAP_LCDC_SIZE			256
> +#define OMAP_LCDC_IRQ			INT_LCD_CTRL
> +
> +#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
> +#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
> +#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
> +#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
> +#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
> +#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
> +#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
> +#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
> +
> +#define OMAP_LCDC_STAT_DONE		(1 << 0)
> +#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
> +#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
> +#define OMAP_LCDC_STAT_ABC		(1 << 3)
> +#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
> +#define OMAP_LCDC_STAT_FUF		(1 << 5)
> +#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
> +
> +#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
> +#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
> +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
> +
> +#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
> +#define OMAP_LCDC_IRQ_DONE		(1 << 3)
> +#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
> +#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
> +#define OMAP_LCDC_IRQ_LINE		(1 << 6)
> +#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
> +
> +#endif
> diff -uprN a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
> --- a/arch/arm/plat-omap/dma.c	2009-11-14 23:48:41.000000000 +0100
> +++ b/arch/arm/plat-omap/dma.c	2009-11-16 23:49:30.000000000 +0100
> @@ -36,6 +36,10 @@
>  
>  #include <plat/tc.h>
>  
> +#ifdef CONFIG_ARCH_OMAP1
> +#include <mach/lcdc.h>
> +#endif
> +
>  #undef DEBUG
>  
>  #ifndef CONFIG_ARCH_OMAP1
> @@ -1124,9 +1128,11 @@ int omap_dma_running(void)
>  	 * On OMAP1510, internal LCD controller will start the transfer
>  	 * when it gets enabled, so assume DMA running if LCD enabled.
>  	 */
> +#ifdef CONFIG_ARCH_OMAP1
>  	if (cpu_is_omap1510())
> -		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
> +		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
>  			return 1;
> +#endif
>  
>  	/* Check if LCD DMA is running */
>  	if (cpu_is_omap16xx())

Hmm, this is getting complicated... How about just add function to
drivers/video/omap/lcdc.c for something like omap_lcdc_get_status()
or similar?

Then you can define that function in some header as:

#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
extern int omap_lcdc_get_status(void);
#else
static inline int omap_lcdc_get_status(void)
{
	return -ENODEV;
}
#endif

That way the defines can stay where they are and you don't need the
ugly ifdefs.

Regards,

Tony


> diff -uprN a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
> --- a/drivers/video/omap/lcdc.c	2009-11-14 23:49:16.000000000 +0100
> +++ b/drivers/video/omap/lcdc.c	2009-11-16 21:10:53.000000000 +0100
> @@ -31,6 +31,7 @@
>  
>  #include <plat/dma.h>
>  #include <plat/omapfb.h>
> +#include <mach/lcdc.h>
>  
>  #include <asm/mach-types.h>
>  
> @@ -38,38 +39,6 @@
>  
>  #define MODULE_NAME			"lcdc"
>  
> -#define OMAP_LCDC_BASE			0xfffec000
> -#define OMAP_LCDC_SIZE			256
> -#define OMAP_LCDC_IRQ			INT_LCD_CTRL
> -
> -#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
> -#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
> -#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
> -#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
> -#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
> -#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
> -#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
> -#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
> -
> -#define OMAP_LCDC_STAT_DONE		(1 << 0)
> -#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
> -#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
> -#define OMAP_LCDC_STAT_ABC		(1 << 3)
> -#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
> -#define OMAP_LCDC_STAT_FUF		(1 << 5)
> -#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
> -
> -#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
> -#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
> -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
> -
> -#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
> -#define OMAP_LCDC_IRQ_DONE		(1 << 3)
> -#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
> -#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
> -#define OMAP_LCDC_IRQ_LINE		(1 << 6)
> -#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
> -
>  #define MAX_PALETTE_SIZE		PAGE_SIZE
>  
>  enum lcdc_load_mode {