From: Tony Lindgren <tony@atomide.com>
To: Ladislav Michl <ladis@linux-mips.org>
Cc: linux-omap@vger.kernel.org, Imre Deak <imre.deak@nokia.com>,
Brian Swetland <swetland@google.com>,
Kevin Hilman <kjh@hilman.org>,
"Syed Mohammed, Khasim" <khasim@ti.com>,
Paul Mundt <lethal@linux-sh.org>,
Dirk Behme <dirk.behme@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>
Subject: Re: [RFC] use physmap-flash
Date: Mon, 7 Dec 2009 10:02:00 -0800 [thread overview]
Message-ID: <20091207180200.GC24013@atomide.com> (raw)
In-Reply-To: <20091206003527.GA13977@localhost.localdomain>
* Ladislav Michl <Ladislav.Michl@seznam.cz> [091205 15:34]:
> Hi!
>
> and sorry for touching ancient stuff again... Also sorry for long Cc list,
> which is not even complete, because some projects seem to be dead now.
>
> So, are there any objections to remove drivers/mtd/maps/omap_nor.c entirely
> in favour of physmap-flash?
Absolutely no objections from me!
Regards,
Tony
> $ rgrep omapflash arch/arm | sed "s/:.*//" | sort | uniq
> arch/arm/mach-omap1/board-fsample.c
> arch/arm/mach-omap1/board-h2.c
> arch/arm/mach-omap1/board-h3.c
> arch/arm/mach-omap1/board-innovator.c
> arch/arm/mach-omap1/board-osk.c
> arch/arm/mach-omap1/board-palmte.c
> arch/arm/mach-omap1/board-palmtt.c
> arch/arm/mach-omap1/board-palmz71.c
> arch/arm/mach-omap1/board-perseus2.c
> arch/arm/mach-omap1/board-sx1.c
> arch/arm/mach-omap2/board-2430sdp.c
> arch/arm/mach-omap2/board-h4.c
>
> Note that list is missing board-voiceblue.c, which is converted by patch bellow.
> Function omap_set_vpp should be probably moved somewhere to plat-omap.
> Suggestions?
>
> diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
> index 35c75c1..30e6d0d 100644
> --- a/arch/arm/mach-omap1/board-voiceblue.c
> +++ b/arch/arm/mach-omap1/board-voiceblue.c
> @@ -22,11 +22,11 @@
> #include <linux/reboot.h>
> #include <linux/serial_8250.h>
> #include <linux/serial_reg.h>
> +#include <linux/mtd/physmap.h>
>
> #include <mach/hardware.h>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> -#include <asm/mach/flash.h>
> #include <asm/mach/map.h>
>
> #include <plat/common.h>
> @@ -85,9 +85,31 @@ static int __init ext_uart_init(void)
> }
> arch_initcall(ext_uart_init);
>
> -static struct flash_platform_data voiceblue_flash_data = {
> - .map_name = "cfi_probe",
> +static void omap_set_vpp(struct map_info *map, int enable)
> +{
> + static int count;
> + u32 l;
> +
> + if (cpu_class_is_omap1()) {
> + if (enable) {
> + if (count++ == 0) {
> + l = omap_readl(EMIFS_CONFIG);
> + l |= OMAP_EMIFS_CONFIG_WP;
> + omap_writel(l, EMIFS_CONFIG);
> + }
> + } else {
> + if (count && (--count == 0)) {
> + l = omap_readl(EMIFS_CONFIG);
> + l &= ~OMAP_EMIFS_CONFIG_WP;
> + omap_writel(l, EMIFS_CONFIG);
> + }
> + }
> + }
> +}
> +
> +static struct physmap_flash_data voiceblue_flash_data = {
> .width = 2,
> + .set_vpp = omap_set_vpp,
> };
>
> static struct resource voiceblue_flash_resource = {
> @@ -97,7 +119,7 @@ static struct resource voiceblue_flash_resource = {
> };
>
> static struct platform_device voiceblue_flash_device = {
> - .name = "omapflash",
> + .name = "physmap-flash",
> .id = 0,
> .dev = {
> .platform_data = &voiceblue_flash_data,
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2009-12-07 18:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-06 0:35 [RFC] use physmap-flash Ladislav Michl
2009-12-07 18:02 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091207180200.GC24013@atomide.com \
--to=tony@atomide.com \
--cc=dirk.behme@gmail.com \
--cc=imre.deak@nokia.com \
--cc=khasim@ti.com \
--cc=kjh@hilman.org \
--cc=ladis@linux-mips.org \
--cc=lethal@linux-sh.org \
--cc=linux-omap@vger.kernel.org \
--cc=marek.vasut@gmail.com \
--cc=swetland@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox