[PATCH 2/2] smc91x: remove OMAP specific bits

[Ladislav Michl <Ladislav.Michl@seznam.cz>]

Now that all OMAP boards are using the board resources, we don't need
to keep the arch/board specific crap in the driver header.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 3911be7..bfc53eb 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -206,21 +206,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 	}
 }
 
-#elif	defined(CONFIG_ARCH_OMAP)
-
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-#define	SMC_IRQ_FLAGS		(-1)	/* from resource */
-
 #elif	defined(CONFIG_SH_SH4202_MICRODEV)
 
 #define SMC_CAN_USE_8BIT	0