From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org
Cc: Vishwanath Sripathy <vishwanath.bs@ti.com>,
Ranjith Lohithakshan <ranjithl@ti.com>
Subject: [PATCH 1/2] OMAP3 clock: reorganize CK_* platform flags
Date: Mon, 14 Dec 2009 13:16:38 -0700 [thread overview]
Message-ID: <20091214201635.370.2758.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091214201431.370.35496.stgit@localhost.localdomain>
Add CK_* flags for the two new Sitara chips, AM3505 and AM3517, and
the OMAP34xx die shrink, OMAP36xx/OMAP37xx. Introduce a new CK_*
flag, CK_3XXX, that marks all clocks that are common to OMAP3 family
chips. CK_343X now refers to clocks that are available only on
OMAP34{1,2,3,4}0 (WTBU) and OMAP35{03,15,25,30} (any version).
At some point, the RATE_IN_* flags should be updated also.
While here, add some documentation describing the chip families
covered by these clock flags.
This patch is partially based on patches from Ranjith Lohithakshan
<ranjithl@ti.com> and Vishwanath Sripathy <vishwanath.bs@ti.com>.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Vishwanath Sripathy <vishwanath.bs@ti.com>
---
arch/arm/mach-omap2/clock34xx_data.c | 4 ++--
arch/arm/plat-omap/include/plat/clkdev_omap.h | 26 ++++++++++++++++---------
2 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 8bdcc9c..d714f84 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -3216,11 +3216,11 @@ int __init omap2_clk_init(void)
/* struct prcm_config *prcm; */
struct omap_clk *c;
/* u32 clkrate; */
- u32 cpu_clkflg;
+ u32 cpu_clkflg = CK_3XXX;
if (cpu_is_omap34xx()) {
cpu_mask = RATE_IN_343X;
- cpu_clkflg = CK_343X;
+ cpu_clkflg |= CK_343X;
/*
* Update this if there are further clock changes between ES2
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 35b36ca..bb937f3 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -25,17 +25,25 @@ struct omap_clk {
}, \
}
-
+/* Platform flags for the clkdev-OMAP integration code */
#define CK_310 (1 << 0)
-#define CK_7XX (1 << 1)
+#define CK_7XX (1 << 1) /* 7xx, 850 */
#define CK_1510 (1 << 2)
-#define CK_16XX (1 << 3)
-#define CK_243X (1 << 4)
-#define CK_242X (1 << 5)
-#define CK_343X (1 << 6)
-#define CK_3430ES1 (1 << 7)
-#define CK_3430ES2 (1 << 8)
-#define CK_443X (1 << 9)
+#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
+#define CK_242X (1 << 4)
+#define CK_243X (1 << 5)
+#define CK_3XXX (1 << 6) /* OMAP3 + AM3 common clocks*/
+#define CK_343X (1 << 7) /* OMAP34xx common clocks */
+#define CK_3430ES1 (1 << 8) /* 34xxES1 only */
+#define CK_3430ES2 (1 << 9) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505 (1 << 10)
+#define CK_3517 (1 << 11)
+#define CK_36XX (1 << 12) /* OMAP36xx/37xx-specific clocks */
+#define CK_443X (1 << 13)
+
+#define CK_AM35XX (CK_3505 | CK_3517) /* all Sitara AM35xx */
+
+
#endif
next prev parent reply other threads:[~2009-12-14 20:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-14 20:16 [PATCH 0/2] OMAP clock: new platform prep + AM35xx clock definitions Paul Walmsley
2009-12-14 20:16 ` Paul Walmsley [this message]
2009-12-14 20:16 ` [PATCH 2/2] AM35xx: Clock table updates for AM3505/17 Paul Walmsley
2009-12-15 11:52 ` Ranjith Lohithakshan
2009-12-15 20:02 ` Paul Walmsley
2009-12-21 6:01 ` Sripathy, Vishwanath
2009-12-21 6:39 ` Ranjith Lohithakshan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091214201635.370.2758.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-omap@vger.kernel.org \
--cc=ranjithl@ti.com \
--cc=vishwanath.bs@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox