From: Paul Walmsley <paul@pwsan.com>
To: nm@ti.com
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 01/12] OMAP OPP: remove some unnecessary variables
Date: Thu, 17 Dec 2009 17:47:32 -0700 [thread overview]
Message-ID: <20091218004730.7694.17270.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091218004617.7694.84525.stgit@localhost.localdomain>
No need to allocate new variables; the passed-in OPP list pointers do nicely
as iterators.
---
arch/arm/plat-omap/include/plat/opp.h | 2 +
arch/arm/plat-omap/opp.c | 52 +++++++++++++++------------------
2 files changed, 24 insertions(+), 30 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/opp.h b/arch/arm/plat-omap/include/plat/opp.h
index 5d5d21b..f340928 100644
--- a/arch/arm/plat-omap/include/plat/opp.h
+++ b/arch/arm/plat-omap/include/plat/opp.h
@@ -60,7 +60,7 @@ unsigned long opp_get_freq(const struct omap_opp *opp);
* This functions returns the number of opps if there are any OPPs enabled,
* else returns corresponding error value.
*/
-int opp_get_opp_count(const struct omap_opp *oppl);
+int opp_get_opp_count(struct omap_opp *oppl);
/**
* opp_find_freq_exact() - search for an exact frequency
diff --git a/arch/arm/plat-omap/opp.c b/arch/arm/plat-omap/opp.c
index c4dc07b..4c581c7 100644
--- a/arch/arm/plat-omap/opp.c
+++ b/arch/arm/plat-omap/opp.c
@@ -62,21 +62,19 @@ unsigned long opp_get_freq(const struct omap_opp *opp)
return opp->rate;
}
-int opp_get_opp_count(const struct omap_opp *oppl)
+int opp_get_opp_count(struct omap_opp *oppl)
{
- struct omap_opp *opp;
u8 n = 0;
if (unlikely(!oppl || IS_ERR(oppl))) {
pr_err("%s: Invalid parameters being passed\n", __func__);
return -EINVAL;
}
- opp = (struct omap_opp *)oppl;
- opp++; /* skip initial terminator */
- while (!OPP_TERM(opp)) {
- if (opp->enabled)
+ oppl++; /* skip initial terminator */
+ while (!OPP_TERM(oppl)) {
+ if (oppl->enabled)
n++;
- opp++;
+ oppl++;
}
return n;
}
@@ -84,54 +82,50 @@ int opp_get_opp_count(const struct omap_opp *oppl)
struct omap_opp *opp_find_freq_exact(struct omap_opp *oppl,
unsigned long freq, bool enabled)
{
- struct omap_opp *opp = (struct omap_opp *)oppl;
-
if (unlikely(!oppl || IS_ERR(oppl))) {
pr_err("%s: Invalid parameters being passed\n", __func__);
return ERR_PTR(-EINVAL);
}
/* skip initial terminator */
- if (OPP_TERM(opp))
- opp++;
- while (!OPP_TERM(opp)) {
- if ((opp->rate == freq) && (opp->enabled == enabled))
+ if (OPP_TERM(oppl))
+ oppl++;
+ while (!OPP_TERM(oppl)) {
+ if ((oppl->rate == freq) && (oppl->enabled == enabled))
break;
- opp++;
+ oppl++;
}
- return OPP_TERM(opp) ? ERR_PTR(-ENOENT) : opp;
+ return OPP_TERM(oppl) ? ERR_PTR(-ENOENT) : oppl;
}
struct omap_opp *opp_find_freq_approx(struct omap_opp *oppl,
unsigned long *freq, u8 dir_flag)
{
- struct omap_opp *opp = (struct omap_opp *)oppl;
-
if (unlikely(!oppl || IS_ERR(oppl) || !freq || IS_ERR(freq))) {
pr_err("%s: Invalid parameters being passed\n", __func__);
return ERR_PTR(-EINVAL);
}
/* skip initial terminator */
- if (OPP_TERM(opp)) {
- opp++;
+ if (OPP_TERM(oppl)) {
+ oppl++;
/* If searching init list for a high val, skip to very top */
if (dir_flag == OPP_SEARCH_LOW)
- while (!OPP_TERM(opp + 1))
- opp++;
+ while (!OPP_TERM(oppl + 1))
+ oppl++;
}
- while (!OPP_TERM(opp)) {
- if (opp->enabled &&
- (((dir_flag == OPP_SEARCH_HIGH) && (opp->rate >= *freq)) ||
- ((dir_flag == OPP_SEARCH_LOW) && (opp->rate <= *freq))))
+ while (!OPP_TERM(oppl)) {
+ if (oppl->enabled &&
+ (((dir_flag == OPP_SEARCH_HIGH) && (oppl->rate >= *freq)) ||
+ ((dir_flag == OPP_SEARCH_LOW) && (oppl->rate <= *freq))))
break;
- opp += (dir_flag == OPP_SEARCH_LOW) ? -1 : 1;
+ oppl += (dir_flag == OPP_SEARCH_LOW) ? -1 : 1;
}
- if (OPP_TERM(opp))
+ if (OPP_TERM(oppl))
return ERR_PTR(-ENOENT);
- *freq = opp->rate;
- return opp;
+ *freq = oppl->rate;
+ return oppl;
}
/* wrapper to reuse converting opp_def to opp struct */
next parent reply other threads:[~2009-12-18 0:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20091218004617.7694.84525.stgit@localhost.localdomain>
2009-12-18 0:47 ` Paul Walmsley [this message]
2009-12-18 17:28 ` [PATCH 01/12] OMAP OPP: remove some unnecessary variables Kevin Hilman
2009-12-18 0:47 ` [PATCH 02/12] OMAP OPP: split opp_find_freq_approx() into opp_find_freq_{floor, ceil}() Paul Walmsley
2009-12-18 0:47 ` [PATCH 03/12] OMAP OPP: only traverse opp_find_freq_floor() once Paul Walmsley
2009-12-19 12:10 ` Menon, Nishanth
2009-12-18 0:47 ` [PATCH 04/12] OMAP TWL/TPS OPP: move TWL/TPS-specific code to its own file Paul Walmsley
2009-12-19 12:14 ` Menon, Nishanth
2009-12-18 0:47 ` [PATCH 05/12] OMAP TWL/TPS OPP: vsel rounding belongs in opp_twl_tps.c Paul Walmsley
2009-12-19 12:16 ` Menon, Nishanth
2009-12-18 0:47 ` [PATCH 06/12] OMAP OPP: add microvolts DC ("u_volt") field into struct omap_opp Paul Walmsley
2009-12-18 0:47 ` [PATCH 07/12] OMAP OPP: add opp_find_opp_by_opp_id() Paul Walmsley
2009-12-18 0:47 ` [PATCH 08/12] OMAP SR/SRF: use opp_find_opp_by_opp_id() Paul Walmsley
2009-12-18 0:47 ` [PATCH 09/12] OMAP OPP: remove vsel Paul Walmsley
2009-12-18 0:47 ` [PATCH 10/12] OMAP OPP: remove "initial terminators" from OPP lists Paul Walmsley
2009-12-18 19:08 ` Kevin Hilman
2009-12-18 0:47 ` [PATCH 11/12] OMAP OPP: use kzalloc() rather than kmalloc() Paul Walmsley
2009-12-18 0:47 ` [PATCH 12/12] OMAP3 OPP: move CPUFreq table init code to OPP layer Paul Walmsley
2009-12-19 12:22 ` Menon, Nishanth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091218004730.7694.17270.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox