Re: [PATCH 2/3] ASoC: OMAP4: Add support for McPDM

[Felipe Balbi <felipe.balbi@nokia.com>]

Hi,

On Sun, Dec 20, 2009 at 03:19:41PM +0100, Balbi Felipe (Nokia-D/Helsinki) wrote:
>Hi,
>
>On Fri, Dec 18, 2009 at 06:01:19PM +0100, ext Candelaria Villareal, Jorge wrote:
>>Mmm... But it _does_ have some breaks. Besides, I am still unsure that
>>if structure should be used here. Code would be duplicated, for example,
>>DN_IRQ_FULL and DN_IRQ_EMPTY share the same procedure to acknowledge
>>the request.
>
>quoting your switch for irq here:
>
>> +       switch (irq_status) {
>> +       case DN_IRQ_FULL:
>> +       case DN_IRQ_EMTPY:
>> +               dev_err(mcpdm_irq->dev, "DN FIFO error %x\n", irq_status);
>> +               omap_mcpdm_reset(MCPDM_DOWNLINK, 1);
>> +               omap_mcpdm_set_downlink(mcpdm_irq->downlink);
>> +               omap_mcpdm_reset(MCPDM_DOWNLINK, 0);
>> +               break;
>> +       case DN_IRQ:
>> +               dev_dbg(mcpdm_irq->dev, "DN write request\n");
>> +               break;
>> +       case UP_IRQ_FULL:
>> +       case UP_IRQ_EMPTY:
>> +               dev_err(mcpdm_irq->dev, "UP FIFO error %x\n", irq_status);
>> +               omap_mcpdm_reset(MCPDM_UPLINK, 1);
>> +               omap_mcpdm_set_uplink(mcpdm_irq->uplink);
>> +               omap_mcpdm_reset(MCPDM_UPLINK, 0);
>> +               break;
>> +       case UP_IRQ:
>> +               dev_dbg(mcpdm_irq->dev, "UP write request\n");
>> +               break;
>> +       }
>
>what happens if you have both DN_IRQ_FULL and DN_IRQ_EMPTY at the same
>time ?


probably DN_IRQ_FULL and DN_IRQ_EMPTY won't happen at the same time, but 
maybe DN_IRQ_FULL and DN_IRQ. The point is that if two bits are enabled 
in the irq status register, the switch won't work.

-- 
balbi