Re: Strange boot messages on mainline + omap3_defconfig

[Tony Lindgren <tony@atomide.com>]

* Romit Dasgupta <romit@ti.com> [091218 04:35]:
> Gadiyar, Anand wrote:
> > I get some "mux: Unknown ball ..." messages booting
> > v2.6.33-rc1 from Linux' tree (built with the omap3_defconfig).
> > 
> > This was on a 3630 SDP.
> > 
> > Won't be looking at this for a while, so just reporting it.
> > 
> > - Anand
> > 
> > 0x588
> > [    0.000000] mux: Unknown ball offset 0x58a
> > [    0.000000] mux: Unknown ball offset 0x58c
> > [    0.000000] mux: Unknown ball offset 0x58e
> > [    0.000000] mux: Unknown ball offset 0x590
> > [    0.000000] mux: Unknown ball offset 0x578
> > [    0.000000] mux: Unknown ball offset 0x57a
> > [    0.000000] mux: Unknown ball offset 0x57c
> > [    0.000000] mux: Unknown ball offset 0x57e
> > [    0.000000] mux: Unknown ball offset 0x580
> > [    0.000000] mux: Unknown ball offset 0x582
> > [    0.000000] mux: Unknown ball offset 0x584
> > [    0.000000] mux: Unknown ball offset 0x586
> > [    0.000000] mux: Unknown ball offset 0x570
> > [    0.000000] mux: Unknown ball offset 0x572
> > [    0.000000] mux: Unknown ball offset 0x40
> > [    0.000000] mux: Unknown ball offset 0x0
> > [    0.000000] mux: Unknown ball offset 0x2
> > 
> > ....
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Try this in you .config
> CONFIG_OMAP_PACKAGE_CBB=y
> CONFIG_OMAP_PACKAGE_CUS=y
> CONFIG_OMAP_PACKAGE_CBP=y

Sounds like the select statement for your the package your
board is using is missing from arch/arm/mach-omap2/Kconfig.

Also looks like we're missing some checks that should be
in place trying to use a non-existing package..

Regards,

Tony