From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] omap: zoom3: enable ehci support Date: Mon, 28 Dec 2009 16:04:10 -0800 Message-ID: <20091229000410.GT3512@atomide.com> References: <1261165300-25985-1-git-send-email-vikram.pandita@ti.com> <5A47E75E594F054BAF48C5E4FC4B92AB031DB9AC76@dbde02.ent.ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-01-ewr.mailhop.org ([204.13.248.71]:50711 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752252AbZL2AEP (ORCPT ); Mon, 28 Dec 2009 19:04:15 -0500 Content-Disposition: inline In-Reply-To: <5A47E75E594F054BAF48C5E4FC4B92AB031DB9AC76@dbde02.ent.ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "Gadiyar, Anand" Cc: "Pandita, Vikram" , "linux-omap@vger.kernel.org" * Gadiyar, Anand [091219 03:12]: > > Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy. > > GPIO_64 is connected to the PHY reset pin. > > > > Signed-off-by: Vikram Pandita > > Cc: Gadiyar, Anand > > Except for one comment (see below), > > Acked-by: Anand Gadiyar > > > --- > > arch/arm/mach-omap2/board-zoom3.c | 16 ++++++++++++++++ > > 1 files changed, 16 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c > > index a9fe918..a5e8036 100644 > > --- a/arch/arm/mach-omap2/board-zoom3.c > > +++ b/arch/arm/mach-omap2/board-zoom3.c > > @@ -20,6 +20,8 @@ > > > > #include > > #include > > +#include > > +#include > > I don't think you need plat/mux.h here? > > The omap_mux_init_gpio() call that you added, is declared > in mux.h, that's included on the next line. Correct, plat/mux.h should not be included for omap3 any longer. It will also disappear for omap2 over next few weeks once I get around fixing omap2 to use the new mux code. Regards, Tony > > > > #include "mux.h" > > #include "sdram-hynix-h8mbx00u0mer-0em.h" > > @@ -51,11 +53,25 @@ static struct omap_board_mux board_mux[] __initdata = { > > #define board_mux NULL > > #endif > > > > +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { > > + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, > > + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, > > + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, > > + > > + .phy_reset = true, > > + .reset_gpio_port[0] = -EINVAL, > > + .reset_gpio_port[1] = 64, > > + .reset_gpio_port[2] = -EINVAL > > +}; > > + > > static void __init omap_zoom_init(void) > > { > > omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); > > zoom_peripherals_init(); > > zoom_debugboard_init(); > > + > > + omap_mux_init_gpio(64, OMAP_PIN_OUTPUT); > > + usb_ehci_init(&ehci_pdata); > > } > > > > MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") > > -- > > 1.6.6.rc0.66.ge160d > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html