Re: [APPLIED] [PATCH v2] omap: zoom3: enable ehci support

[Tony Lindgren <tony@atomide.com>]

* Tony Lindgren <tony@atomide.com> [100111 15:35]:
> This patch has been applied to the linux-omap
> by youw fwiendly patch wobot.
> 
> Branch in linux-omap: for-next
> 
> Initial commit ID (Likely to change): 426d2accc2b9c0392b2be9b8daed5699a08d8822
> 
> PatchWorks
> http://patchwork.kernel.org/patch/71641/
> 
> Git (Likely to change, and takes a while to get mirrored)
> http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=426d2accc2b9c0392b2be9b8daed5699a08d8822

I've updated the patch with following cosmetic clean-up:

diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index b691340..6512b21 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -53,14 +53,13 @@ static struct omap_board_mux board_mux[] __initdata = {
 #endif
 
 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 64,
-	.reset_gpio_port[2]  = -EINVAL
+	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset		= true,
+	.reset_gpio_port[0]	= -EINVAL,
+	.reset_gpio_port[1]	= 64,
+	.reset_gpio_port[2]	= -EINVAL,
 };
 
 static void __init omap_zoom_init(void)

Regards,

Tony