From: Adrian Hunter <adrian.hunter@nokia.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-mmc Mailing List <linux-mmc@vger.kernel.org>,
Adrian Hunter <adrian.hunter@nokia.com>,
linux-omap Mailing List <linux-omap@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Madhusudhan Chikkature <madhu.cr@ti.com>
Subject: [PATCH 4/8] omap_hsmmc: set DVFS/PM constraints
Date: Wed, 13 Jan 2010 13:40:41 +0200 [thread overview]
Message-ID: <20100113114041.7615.830.sendpatchset@ahunter-work.research.nokia.com> (raw)
In-Reply-To: <20100113114010.7615.84920.sendpatchset@ahunter-work.research.nokia.com>
>From afab8b432b37ae1f42b281e58989c8d607ed7183 Mon Sep 17 00:00:00 2001
From: Denis Karpov <ext-denis.2.karpov@nokia.com>
Date: Wed, 8 Jul 2009 16:15:08 +0200
Subject: [PATCH] omap_hsmmc: set DVFS/PM constraints
Set constraint for MPU minimal frequency to maintain good
I/O performance.
The constraint is set in MMC host 'ENABLED' state and dropped
when MMC host enters 'DISABLED' state which currently happens
upon 100ms of inactivity.
Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 18 ++++++++++++++++++
arch/arm/mach-omap2/hsmmc.c | 2 ++
arch/arm/mach-omap2/hsmmc.h | 2 ++
arch/arm/plat-omap/include/plat/mmc.h | 3 +++
drivers/mmc/host/omap_hsmmc.c | 17 +++++++++++++++++
5 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ab07ca2..b6318b1 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -209,6 +209,22 @@ static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
+#if defined(CONFIG_BRIDGE_DVFS)
+/*
+ * This handler can be used for setting other DVFS/PM constraints:
+ * intr latency, wakeup latency, DMA start latency, bus throughput
+ * according to API in mach/omap-pm.h. Currently we only set constraints
+ * for MPU frequency.
+ */
+#define MMC_MIN_MPU_FREQUENCY 500000000 /* S500M at OPP3 */
+static void rx51_mmc_set_pm_constraints(struct device *dev, int on)
+{
+ omap_pm_set_min_mpu_freq(dev, (on ? MMC_MIN_MPU_FREQUENCY : 0));
+}
+#else
+#define rx51_mmc_set_pm_constraints NULL
+#endif
+
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
@@ -218,6 +234,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.gpio_cd = 160,
.gpio_wp = -EINVAL,
.power_saving = true,
+ .set_pm_constraints = rx51_mmc_set_pm_constraints,
},
{
.name = "internal",
@@ -227,6 +244,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
+ .set_pm_constraints = rx51_mmc_set_pm_constraints,
},
{} /* Terminator */
};
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 76a1f6c..1211d15 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -76,6 +76,8 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
mmc->get_context_loss_count = hsmmc_get_context_loss;
+ mmc->set_pm_constraints = c->set_pm_constraints;
+
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].gpio_wp = c->gpio_wp;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index e946b5f..ad437f3 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -19,6 +19,8 @@ struct omap2_hsmmc_info {
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
int ocr_mask; /* temporary HACK */
+ /* Set/drop DVFS/PM constraints */
+ void (*set_pm_constraints)(struct device *dev, int on);
};
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 6af87b0..c3e0c34 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -69,6 +69,9 @@ struct omap_mmc_platform_data {
/* Return context loss count due to PM states changing */
int (*get_context_loss_count)(struct device *dev);
+ /* Set/drop DVFS/PM constraints */
+ void (*set_pm_constraints)(struct device *dev, int on);
+
u64 dma_mask;
struct omap_mmc_slot_data {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 63d24df..e2f63a5 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1677,7 +1677,13 @@ enum {ENABLED = 0, DISABLED, CARDSLEEP, REGSLEEP, OFF};
static int omap_hsmmc_enabled_to_disabled(struct omap_hsmmc_host *host)
{
omap_hsmmc_context_save(host);
+
clk_disable(host->fclk);
+
+ /* Drop PM/DVFS constraints */
+ if (host->pdata->set_pm_constraints)
+ host->pdata->set_pm_constraints(host->dev, 0);
+
host->dpm_state = DISABLED;
dev_dbg(mmc_dev(host->mmc), "ENABLED -> DISABLED\n");
@@ -1768,6 +1774,10 @@ static int omap_hsmmc_disabled_to_enabled(struct omap_hsmmc_host *host)
return err;
omap_hsmmc_context_restore(host);
+
+ if (host->pdata->set_pm_constraints)
+ host->pdata->set_pm_constraints(host->dev, 1);
+
host->dpm_state = ENABLED;
dev_dbg(mmc_dev(host->mmc), "DISABLED -> ENABLED\n");
@@ -1792,6 +1802,9 @@ static int omap_hsmmc_sleep_to_enabled(struct omap_hsmmc_host *host)
dev_dbg(mmc_dev(host->mmc), "%s -> ENABLED\n",
host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP");
+ if (host->pdata->set_pm_constraints)
+ host->pdata->set_pm_constraints(host->dev, 1);
+
host->dpm_state = ENABLED;
mmc_release_host(host->mmc);
@@ -1808,6 +1821,9 @@ static int omap_hsmmc_off_to_enabled(struct omap_hsmmc_host *host)
omap_hsmmc_conf_bus_power(host);
mmc_power_restore_host(host->mmc);
+ if (host->pdata->set_pm_constraints)
+ host->pdata->set_pm_constraints(host->dev, 1);
+
host->dpm_state = ENABLED;
dev_dbg(mmc_dev(host->mmc), "OFF -> ENABLED\n");
@@ -1834,6 +1850,7 @@ static int omap_hsmmc_enable(struct mmc_host *mmc)
dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n");
return -EINVAL;
}
+
}
/*
--
1.6.0.4
next prev parent reply other threads:[~2010-01-13 11:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-13 11:40 [PATCH 0/8] omap_hsmmc changes Adrian Hunter
2010-01-13 11:40 ` [PATCH 1/8] omap_hsmmc: move gpio and regulator control from board file Adrian Hunter
2010-01-13 18:54 ` Tony Lindgren
2010-01-14 7:58 ` Adrian Hunter
2010-01-13 22:28 ` Madhusudhan
2010-01-14 8:17 ` Adrian Hunter
2010-01-13 11:40 ` [PATCH 2/8] OMAP: rename mmc-twl4030 to hsmmc Adrian Hunter
2010-01-13 11:40 ` [PATCH 3/8] OMAP: reconnect hsmmc context loss count Adrian Hunter
2010-01-14 19:55 ` Paul Walmsley
2010-01-13 11:40 ` Adrian Hunter [this message]
2010-01-13 22:53 ` [PATCH 4/8] omap_hsmmc: set DVFS/PM constraints Paul Walmsley
2010-01-14 8:28 ` Adrian Hunter
2010-01-14 19:53 ` Paul Walmsley
2010-01-15 9:04 ` Adrian Hunter
2010-01-13 11:40 ` [PATCH 5/8] omap_hsmmc: RX51: set padconfs to pull down when powering off eMMC Adrian Hunter
2010-01-13 20:37 ` Tony Lindgren
2010-01-13 20:39 ` Tony Lindgren
2010-01-13 21:00 ` Tony Lindgren
2010-01-13 23:30 ` Nishanth Menon
2010-01-14 7:57 ` Adrian Hunter
2010-01-15 13:11 ` Adrian Hunter
2010-01-13 11:40 ` [PATCH 6/8] omap_hsmmc: allow for power saving without going off Adrian Hunter
2010-01-13 11:41 ` [PATCH 7/8] omap_hsmmc: fix disable timeouts Adrian Hunter
2010-01-13 11:41 ` [PATCH 8/8] omap_hsmmc: allow for a shared VccQ Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100113114041.7615.830.sendpatchset@ahunter-work.research.nokia.com \
--to=adrian.hunter@nokia.com \
--cc=akpm@linux-foundation.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=madhu.cr@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox