From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 1/9] omap: Move multi-omap ifdeffery into it's own header file
Date: Fri, 29 Jan 2010 18:01:23 -0800 [thread overview]
Message-ID: <20100130020123.10590.29024.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100130020036.10590.78028.stgit@baageli.muru.com>
This way we can include it easily as needed also for .S files.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/include/plat/cpu.h | 70 -----------------------
arch/arm/plat-omap/include/plat/multi.h | 94 +++++++++++++++++++++++++++++++
2 files changed, 95 insertions(+), 69 deletions(-)
create mode 100644 arch/arm/plat-omap/include/plat/multi.h
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 995466d..b80151c 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -31,6 +31,7 @@
#define __ASM_ARCH_OMAP_CPU_H
#include <linux/bitops.h>
+#include <plat/multi.h>
/*
* Omap device type i.e. EMU/HS/TST/GP/BAD
@@ -76,75 +77,6 @@ unsigned int omap_rev(void);
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730, OMAP850
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
new file mode 100644
index 0000000..f235d32
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -0,0 +1,94 @@
+/*
+ * Support for compiling in multiple OMAP processors
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PLAT_OMAP_MULTI_H
+#define __PLAT_OMAP_MULTI_H
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+# error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3430
+# endif
+#endif
+
+#endif /* __PLAT_OMAP_MULTI_H */
next prev parent reply other threads:[~2010-01-30 2:01 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-30 2:01 [PATCH 0/9] Initial multi-omap support for omap4 Tony Lindgren
2010-01-30 2:01 ` Tony Lindgren [this message]
2010-01-30 2:01 ` [PATCH 2/9] omap2/3/4: Clean up defines for entry-macro.S Tony Lindgren
2010-01-30 2:01 ` [PATCH 3/9] omap4: Use get_irqnr_preamble Tony Lindgren
2010-01-30 2:01 ` [PATCH 4/9] omap2/3/4: Clean up entry-macro.s for adding support for omap4 multiboot Tony Lindgren
2010-01-30 2:01 ` [PATCH 5/9] omap2/3/4: Allow booting omap4 with multi-omap configuration Tony Lindgren
2010-01-30 2:01 ` [PATCH 6/9] omap3/4: Fix compile for multi-omap for clkops_noncore_dpll_ops Tony Lindgren
2010-02-01 20:20 ` Paul Walmsley
2010-01-30 2:01 ` [PATCH 7/9] omap: Fix gpio.c for multi-omap for omap4 Tony Lindgren
2010-01-30 2:01 ` [PATCH 8/9] omap2/3/4: Fix mach-omap2/serial.c for multiboot Tony Lindgren
2010-01-30 2:01 ` [PATCH 9/9] omap2/3/4: Add omap4 into omap3_defconfnig Tony Lindgren
2010-01-30 11:09 ` [PATCH 0/9] Initial multi-omap support for omap4 Shilimkar, Santosh
2010-01-30 16:18 ` Tony Lindgren
2010-01-30 12:51 ` Shilimkar, Santosh
2010-01-30 16:24 ` Tony Lindgren
2010-01-30 17:54 ` Shilimkar, Santosh
2010-02-01 19:11 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100130020123.10590.29024.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox