public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Tiago Maluta <tiago.maluta@gmail.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [RFC][PATCH] Allow change timing values to wait slow devices bring up before try register an interface to IP-Config (used on some drivers using Multi-purpose USB Networking Framework)
Date: Tue, 9 Feb 2010 14:20:35 -0800	[thread overview]
Message-ID: <20100209222035.GI21755@atomide.com> (raw)
In-Reply-To: <600adaf51002061530o700378aaq75ff83b04d977958@mail.gmail.com>

Hi,

* Tiago Maluta <tiago.maluta@gmail.com> [100206 15:28]:
> I'd like to know if this patch could be considered an general use or
> an particular case.

This is Linux generic, so it should get sent to linux-usb and net
lists instead.

Regards,

Tony

> 
> --tm
> 
> Signed-off-by: Tiago Maluta <maluta@unifei.edu.br>
> ---
>  drivers/net/usb/Kconfig |   17 +++++++++++++++++
>  net/ipv4/ipconfig.c     |    4 ++--
>  2 files changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
> index 32d9356..5b84e57 100644
> --- a/drivers/net/usb/Kconfig
> +++ b/drivers/net/usb/Kconfig
> @@ -127,6 +127,23 @@ config USB_USBNET
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called usbnet.
> 
> +
> +config USB_USBNETDEVICE_DELAY_PRE
> +	int "Define the friendly delay before opening net devices "
> +	depends on USB_USBNET
> +	default 500
> +	help
> +	    Some devices may not work due to a delay from hardware bring the interface
> +	    up. This value added a delay before search and register the interface.
> +
> +config USB_USBNETDEVICE_DELAY_POST
> +	int "Define the friendly delay after opening net devices "
> +	depends on USB_USBNET
> +	default 1
> +	help
> +	    Some devices may not work due to a delay from hardware bring the interface
> +	    up. This value added a delay before search and register the interface.
> +
>  config USB_NET_AX8817X
>  	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
>  	depends on USB_USBNET
> diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
> index 10a6a60..3faac07 100644
> --- a/net/ipv4/ipconfig.c
> +++ b/net/ipv4/ipconfig.c
> @@ -86,8 +86,8 @@
>  #endif
> 
>  /* Define the friendly delay before and after opening net devices */
> -#define CONF_PRE_OPEN		500	/* Before opening: 1/2 second */
> -#define CONF_POST_OPEN		1	/* After opening: 1 second */
> +#define CONF_PRE_OPEN		CONFIG_USB_USBNETDEVICE_DELAY_PRE	/* Before
> opening. Default 1/2 second */
> +#define CONF_POST_OPEN		CONFIG_USB_USBNETDEVICE_DELAY_POST	/* After
> opening. Default 1 second */
> 
>  /* Define the timeout for waiting for a DHCP/BOOTP/RARP reply */
>  #define CONF_OPEN_RETRIES 	2	/* (Re)open devices twice */
> -- 
> 1.6.4.2
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

      reply	other threads:[~2010-02-09 22:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-06 23:30 [RFC][PATCH] Allow change timing values to wait slow devices bring up before try register an interface to IP-Config (used on some drivers using Multi-purpose USB Networking Framework) Tiago Maluta
2010-02-09 22:20 ` Tony Lindgren [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100209222035.GI21755@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=tiago.maluta@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox