[PATCH 1/2-V2] AM3517: Enable RTC driver support for AM3517EVM

[PATCH 1/2-V2] AM3517: Enable RTC driver support for AM3517EVM

[hvaibhav]

From: Vaibhav Hiremath <hvaibhav@ti.com>

Add platform hook-up interface to support RTC driver (S35390A).

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
---
 arch/arm/mach-omap2/board-am3517evm.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 247c700..d9f487f 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -174,6 +174,18 @@ struct platform_device am3517_evm_dss_device = {
 		.platform_data	= &am3517_evm_dss_data,
 	},
 };
+/*
+ * RTC - S35390A
+ */
+#define	GPIO_RTCS35390A_IRQ	55
+
+static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("s35390a", 0x30),
+		.type		= "s35390a",
+	},
+};
+

 static int __init am3517_evm_i2c_init(void)
 {
@@ -235,6 +247,19 @@ static void __init am3517_evm_init(void)
 	usb_ehci_init(&ehci_pdata);
 	/* DSS */
 	am3517_evm_display_init();
+
+	/* RTC - S35390A */
+	omap_mux_init_gpio(55, OMAP_PIN_INPUT_PULLUP);
+	if (gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq") < 0)
+		printk(KERN_WARNING "failed to request GPIO#%d\n",
+				GPIO_RTCS35390A_IRQ);
+	if (gpio_direction_input(GPIO_RTCS35390A_IRQ))
+		printk(KERN_WARNING "GPIO#%d cannot be configured as "
+				"input\n", GPIO_RTCS35390A_IRQ);
+	am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+
+	i2c_register_board_info(1, am3517evm_i2c_boardinfo,
+				ARRAY_SIZE(am3517evm_i2c_boardinfo));
 }

 static void __init am3517_evm_map_io(void)
--
1.6.2.4

Re: [PATCH 1/2-V2] AM3517: Enable RTC driver support for AM3517EVM

[Tony Lindgren]

* hvaibhav@ti.com <hvaibhav@ti.com> [100211 00:09]:
> From: Vaibhav Hiremath <hvaibhav@ti.com>
> 
> Add platform hook-up interface to support RTC driver (S35390A).
> 
> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
> ---
>  arch/arm/mach-omap2/board-am3517evm.c |   25 +++++++++++++++++++++++++
>  1 files changed, 25 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
> index 247c700..d9f487f 100644
> --- a/arch/arm/mach-omap2/board-am3517evm.c
> +++ b/arch/arm/mach-omap2/board-am3517evm.c
> @@ -174,6 +174,18 @@ struct platform_device am3517_evm_dss_device = {
>  		.platform_data	= &am3517_evm_dss_data,
>  	},
>  };
> +/*
> + * RTC - S35390A
> + */
> +#define	GPIO_RTCS35390A_IRQ	55

Please change this into standard

#define GPIO_RTCS35390A_IRQ     55

instead of having a tab between #define and GPIO...

> +static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
> +	{
> +		I2C_BOARD_INFO("s35390a", 0x30),
> +		.type		= "s35390a",
> +	},
> +};
> +
> 
>  static int __init am3517_evm_i2c_init(void)
>  {
> @@ -235,6 +247,19 @@ static void __init am3517_evm_init(void)
>  	usb_ehci_init(&ehci_pdata);
>  	/* DSS */
>  	am3517_evm_display_init();
> +
> +	/* RTC - S35390A */
> +	omap_mux_init_gpio(55, OMAP_PIN_INPUT_PULLUP);
> +	if (gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq") < 0)
> +		printk(KERN_WARNING "failed to request GPIO#%d\n",
> +				GPIO_RTCS35390A_IRQ);

Here you need to check the return value before trying to change
the GPIO value. In general it's preferred to use:

	int err;

	err = gpio_request()
	if (err < 0)
		return err;
	...


> +	if (gpio_direction_input(GPIO_RTCS35390A_IRQ))
> +		printk(KERN_WARNING "GPIO#%d cannot be configured as "
> +				"input\n", GPIO_RTCS35390A_IRQ);

And only after that call gpio_direction_input.

Regards,

Tony

> +	am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
> +
> +	i2c_register_board_info(1, am3517evm_i2c_boardinfo,
> +				ARRAY_SIZE(am3517evm_i2c_boardinfo));
>  }
> 
>  static void __init am3517_evm_map_io(void)
> --
> 1.6.2.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html