[PATCH 0/24] omap4 for 2.6.34

[PATCH 0/24] omap4 for 2.6.34

[Shilimkar, Santosh]

Tony,
Here are some patches towards upcoming 34 merge window. They are generated against 
linux-omap master as you suggested.

I am also copying Ben, Samuel, Liam, Paul and Kevin since some of the changes
are in mfd, regulator, i2c and clocks.

The series enables most of the core driver like WDT, RTC, McBSP, Regulator,
UART,DMA and I2C on omap4 platform. This series also has few fixes towards 
multi-omap build. It would be nice development platform for
upcoming peripheral drivers like MMC, Keyboard, Ethernet, DSS, touch screen,
audio etc.

The series is boot tested with multi-omap build (omap3_defconfig) on omap3430 sdp
and omap4430 sdp. Also regular omap_4430sdp_defconfig and omap_3430sdp_defconfig
boot tested.

The following changes since commit 301f2e037b161c79bf12f4194501c9ff9c12ced3:
  Tony Lindgren (1):
        Linux-omap rebuilt: dss board changes merged

Abhijit Pagare (3):
      omap4: clocks: Make Uart driver's clock calls OMAP4 compatible
      omap4: clokcs: Make gpio driver's clock calls OMAP4 compatible
      omap4: clocks: Make i2c driver's clock calls OMAP4 compatible

Balaji T K (4):
      twl6030: add base addr for ID0, ID1, ID2
      omap4: add i2c1 peripherals data
      omap4: add regulator board data for TWL6030
      omap4: Enable RTC and regulator support

Rajendra Nayak (1):
      twl6030: Fix vsel calculations in set/get voltage api's

Santosh Shilimkar (16):
      omap 3/4: uart: fix full-fifo write abort
      omap2/3/4: ioremap omap_globals module
      omap4: sdma: Enable the idle modes on omap4
      omap: sdma: Limit the secure reserve channel fix for omap3
      omap4: Add needed IRQ line into irqs.h
      omap4: Fix omap_type() for omap4
      omap 3/4: Remove overlapping mapping of L4_WKUP io space
      omap4: clocks: Make mcbsp driver's clock calls OMAP4 compatible
      omap4: clocks: Make watchdog driver's clock calls OMAP4 compatible
      omap4: clocks: Make dmtimer clocks calls OMAP4 compatible
      omap4: clocks: Remove clock hacks from timer-gp.c
      omap4: Enable WDT and McBSP support
      omap4: clocks: Convert i2c clocks data to fclks
      omap4: Add i2c support on omap4 platform
      omap4: Add i2c board support for omap4 platform
      omap4: multi-omap: Allow build to work

 arch/arm/configs/omap_4430sdp_defconfig   |   46 ++++++-
 arch/arm/mach-omap2/board-4430sdp.c       |  186 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/clock44xx_data.c      |    8 +-
 arch/arm/mach-omap2/control.c             |    6 +-
 arch/arm/mach-omap2/id.c                  |    2 +
 arch/arm/mach-omap2/io.c                  |   12 --
 arch/arm/mach-omap2/prcm.c                |   16 ++-
 arch/arm/mach-omap2/sdrc.c                |   11 ++-
 arch/arm/mach-omap2/serial.c              |   55 +++++++--
 arch/arm/mach-omap2/timer-gp.c            |    5 -
 arch/arm/plat-omap/common.c               |   38 +++---
 arch/arm/plat-omap/dma.c                  |    5 +-
 arch/arm/plat-omap/dmtimer.c              |   25 +++-
 arch/arm/plat-omap/gpio.c                 |    7 +-
 arch/arm/plat-omap/i2c.c                  |   17 ++-
 arch/arm/plat-omap/include/plat/common.h  |   12 +-
 arch/arm/plat-omap/include/plat/control.h |    3 +
 arch/arm/plat-omap/include/plat/io.h      |    9 --
 arch/arm/plat-omap/include/plat/irqs.h    |    5 +
 arch/arm/plat-omap/io.c                   |    4 -
 arch/arm/plat-omap/mcbsp.c                |   13 ++-
 drivers/i2c/busses/i2c-omap.c             |  169 ++++++++++++++++++++------
 drivers/mfd/twl-core.c                    |    7 +-
 drivers/regulator/twl-regulator.c         |   23 +++-
 drivers/usb/musb/musb_core.c              |    4 +
 drivers/watchdog/Kconfig                  |    6 +-
 drivers/watchdog/omap_wdt.c               |   39 ++++--
 include/linux/i2c/twl.h                   |    5 +
 28 files changed, 576 insertions(+), 162 deletions(-)


Regards,
Santsoh

RE: [PATCH 0/24] omap4 for 2.6.34

[Shilimkar, Santosh]

Resending with correct patch numbers. 

> -----Original Message-----
> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-owner@vger.kernel.org] On Behalf Of
> Shilimkar, Santosh
> Sent: Tuesday, February 16, 2010 9:06 PM
> To: Tony Lindgren
> Cc: Ben Dooks; Samuel Ortiz; Kevin Hilman; Paul Walmsley; lrg@slimlogic.co.uk; linux-
> omap@vger.kernel.org
> Subject: [PATCH 0/24] omap4 for 2.6.34
> 
> Tony,
> Here are some patches towards upcoming 34 merge window. They are generated against
> linux-omap master as you suggested.
> 
> I am also copying Ben, Samuel, Liam, Paul and Kevin since some of the changes
> are in mfd, regulator, i2c and clocks.
> 
> The series enables most of the core driver like WDT, RTC, McBSP, Regulator,
> UART,DMA and I2C on omap4 platform. This series also has few fixes towards
> multi-omap build. It would be nice development platform for
> upcoming peripheral drivers like MMC, Keyboard, Ethernet, DSS, touch screen,
> audio etc.
> 
> The series is boot tested with multi-omap build (omap3_defconfig) on omap3430 sdp
> and omap4430 sdp. Also regular omap_4430sdp_defconfig and omap_3430sdp_defconfig
> boot tested.
> 
> The following changes since commit 301f2e037b161c79bf12f4194501c9ff9c12ced3:
>   Tony Lindgren (1):
>         Linux-omap rebuilt: dss board changes merged
> 
> Abhijit Pagare (3):
>       omap4: clocks: Make Uart driver's clock calls OMAP4 compatible
>       omap4: clokcs: Make gpio driver's clock calls OMAP4 compatible
>       omap4: clocks: Make i2c driver's clock calls OMAP4 compatible
> 
> Balaji T K (4):
>       twl6030: add base addr for ID0, ID1, ID2
>       omap4: add i2c1 peripherals data
>       omap4: add regulator board data for TWL6030
>       omap4: Enable RTC and regulator support
> 
> Rajendra Nayak (1):
>       twl6030: Fix vsel calculations in set/get voltage api's
> 
> Santosh Shilimkar (16):
>       omap 3/4: uart: fix full-fifo write abort
>       omap2/3/4: ioremap omap_globals module
>       omap4: sdma: Enable the idle modes on omap4
>       omap: sdma: Limit the secure reserve channel fix for omap3
>       omap4: Add needed IRQ line into irqs.h
>       omap4: Fix omap_type() for omap4
>       omap 3/4: Remove overlapping mapping of L4_WKUP io space
>       omap4: clocks: Make mcbsp driver's clock calls OMAP4 compatible
>       omap4: clocks: Make watchdog driver's clock calls OMAP4 compatible
>       omap4: clocks: Make dmtimer clocks calls OMAP4 compatible
>       omap4: clocks: Remove clock hacks from timer-gp.c
>       omap4: Enable WDT and McBSP support
>       omap4: clocks: Convert i2c clocks data to fclks
>       omap4: Add i2c support on omap4 platform
>       omap4: Add i2c board support for omap4 platform
>       omap4: multi-omap: Allow build to work
> 
>  arch/arm/configs/omap_4430sdp_defconfig   |   46 ++++++-
>  arch/arm/mach-omap2/board-4430sdp.c       |  186 +++++++++++++++++++++++++++++
>  arch/arm/mach-omap2/clock44xx_data.c      |    8 +-
>  arch/arm/mach-omap2/control.c             |    6 +-
>  arch/arm/mach-omap2/id.c                  |    2 +
>  arch/arm/mach-omap2/io.c                  |   12 --
>  arch/arm/mach-omap2/prcm.c                |   16 ++-
>  arch/arm/mach-omap2/sdrc.c                |   11 ++-
>  arch/arm/mach-omap2/serial.c              |   55 +++++++--
>  arch/arm/mach-omap2/timer-gp.c            |    5 -
>  arch/arm/plat-omap/common.c               |   38 +++---
>  arch/arm/plat-omap/dma.c                  |    5 +-
>  arch/arm/plat-omap/dmtimer.c              |   25 +++-
>  arch/arm/plat-omap/gpio.c                 |    7 +-
>  arch/arm/plat-omap/i2c.c                  |   17 ++-
>  arch/arm/plat-omap/include/plat/common.h  |   12 +-
>  arch/arm/plat-omap/include/plat/control.h |    3 +
>  arch/arm/plat-omap/include/plat/io.h      |    9 --
>  arch/arm/plat-omap/include/plat/irqs.h    |    5 +
>  arch/arm/plat-omap/io.c                   |    4 -
>  arch/arm/plat-omap/mcbsp.c                |   13 ++-
>  drivers/i2c/busses/i2c-omap.c             |  169 ++++++++++++++++++++------
>  drivers/mfd/twl-core.c                    |    7 +-
>  drivers/regulator/twl-regulator.c         |   23 +++-
>  drivers/usb/musb/musb_core.c              |    4 +
>  drivers/watchdog/Kconfig                  |    6 +-
>  drivers/watchdog/omap_wdt.c               |   39 ++++--
>  include/linux/i2c/twl.h                   |    5 +
>  28 files changed, 576 insertions(+), 162 deletions(-)
> 
> 
> Regards,
> Santsoh
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/24] omap4 for 2.6.34

[Tony Lindgren]

Hi,

* Shilimkar, Santosh <santosh.shilimkar@ti.com> [100216 07:33]:
> Tony,
> Here are some patches towards upcoming 34 merge window. They are generated against 
> linux-omap master as you suggested.
> 
> I am also copying Ben, Samuel, Liam, Paul and Kevin since some of the changes
> are in mfd, regulator, i2c and clocks.

Thanks. Can you please split this into several smaller sets?

1. Core omap changes done against linux-omap master branch
   Send to linux-omap list with linux-arm-kernel Cc'd.

2. Clock framework dummy_ck changes done against linux-omap master branch.
   This should leave out most of the driver changes in your series.
   Send to linux-omap list with linux-arm-kernel Cc'd.

3. I2C changes against done against 2.6.33-rc8 + "Add support for 16-bit registers"
   Send to Ben and i2c list with linux-omap list Cc'd.

4. MFD changes done against 2.6.33-rc8
   Send to Samuel with linux-omap list Cc'd.

Regards,

Tony 

RE: [PATCH 0/24] omap4 for 2.6.34

[Shilimkar, Santosh]

Tony,

> -----Original Message-----
> From: Tony Lindgren [mailto:tony@atomide.com]
> Sent: Wednesday, February 17, 2010 12:33 AM
> To: Shilimkar, Santosh
> Cc: Ben Dooks; Samuel Ortiz; Kevin Hilman; Paul Walmsley; lrg@slimlogic.co.uk; linux-
> omap@vger.kernel.org
> Subject: Re: [PATCH 0/24] omap4 for 2.6.34
> 
> Hi,
> 
> * Shilimkar, Santosh <santosh.shilimkar@ti.com> [100216 07:33]:
> > Tony,
> > Here are some patches towards upcoming 34 merge window. They are generated against
> > linux-omap master as you suggested.
> >
> > I am also copying Ben, Samuel, Liam, Paul and Kevin since some of the changes
> > are in mfd, regulator, i2c and clocks.
> 
> Thanks. Can you please split this into several smaller sets?
> 
> 1. Core omap changes done against linux-omap master branch
>    Send to linux-omap list with linux-arm-kernel Cc'd.
ok 
> 2. Clock framework dummy_ck changes done against linux-omap master branch.
>    This should leave out most of the driver changes in your series.
>    Send to linux-omap list with linux-arm-kernel Cc'd.
Will do. Some clock node names are changed and since we do clk_get based on clock node
names, such drivers need to change. 
> 3. I2C changes against done against 2.6.33-rc8 + "Add support for 16-bit registers"
>    Send to Ben and i2c list with linux-omap list Cc'd.
ok
> 4. MFD changes done against 2.6.33-rc8
>    Send to Samuel with linux-omap list Cc'd.
Sounds good.
I sent this series just to ensure that we all are aligned on
dependancies and also just to highlight that all of these 
should get merged together.

Thanks for feedback.

Regards,
Santosh

Re: [PATCH 0/24] omap4 for 2.6.34

[Tony Lindgren]

* Shilimkar, Santosh <santosh.shilimkar@ti.com> [100216 21:14]:
> 
> > 2. Clock framework dummy_ck changes done against linux-omap master branch.
> >    This should leave out most of the driver changes in your series.
> >    Send to linux-omap list with linux-arm-kernel Cc'd.
> Will do. Some clock node names are changed and since we do clk_get based on clock node
> names, such drivers need to change. 

Hmm, that does not sound right, the clock users need to stay generic.

Can't you use an alias for those clocks in omap44xx_clks[]?

Regards,

Tony