From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org, Grazvydas Ignotas <notasas@gmail.com>
Subject: [PATCH 06/23] omap3: pandora: update regulator setup
Date: Wed, 17 Feb 2010 17:32:05 -0800 [thread overview]
Message-ID: <20100218013205.32075.22933.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100218013012.32075.43788.stgit@baageli.muru.com>
From: Grazvydas Ignotas <notasas@gmail.com>
Update pandora's regulator setup:
- add new regulators: VAUX2, VAUX4 and VSIM
- add new consumers: ads7846, nub controllers, USB PHY, audio DAC
- use dev names instead of struct device pointers
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-omap3pandora.c | 111 +++++++++++++++++++++---------
1 files changed, 78 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7ea3894..a0acf8d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -227,27 +227,6 @@ static struct platform_device pandora_dss_device = {
},
};
-static struct regulator_consumer_supply pandora_vcc_lcd_supply = {
- .supply = "vcc",
- .dev = &pandora_lcd_device.dev,
-};
-
-static struct regulator_consumer_supply pandora_vdda_dac_supply = {
- .supply = "vdda_dac",
- .dev = &pandora_dss_device.dev,
-};
-
-static struct regulator_consumer_supply pandora_vdds_supplies[] = {
- {
- .supply = "vdds_sdi",
- .dev = &pandora_dss_device.dev,
- },
- {
- .supply = "vdds_dsi",
- .dev = &pandora_dss_device.dev,
- },
-};
-
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
@@ -273,14 +252,6 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{} /* Terminator */
};
-static struct regulator_consumer_supply pandora_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply = {
- .supply = "vmmc",
-};
-
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -289,10 +260,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
omap3pandora_mmc[1].gpio_cd = gpio + 1;
omap2_hsmmc_init(omap3pandora_mmc);
- /* link regulators to MMC adapters */
- pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
- pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
-
return 0;
}
@@ -303,6 +270,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.setup = omap3pandora_twl_gpio_setup,
};
+static struct regulator_consumer_supply pandora_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply pandora_vmmc2_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply pandora_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply pandora_vdds_supplies[] = {
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply pandora_vcc_lcd_supply =
+ REGULATOR_SUPPLY("vcc", "display0");
+
+static struct regulator_consumer_supply pandora_usb_phy_supply =
+ REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+
+/* ads7846 on SPI and 2 nub controllers on I2C */
+static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+ REGULATOR_SUPPLY("vcc", "3-0066"),
+ REGULATOR_SUPPLY("vcc", "3-0067"),
+};
+
+static struct regulator_consumer_supply pandora_adac_supply =
+ REGULATOR_SUPPLY("vcc", "soc-audio");
+
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
.constraints = {
@@ -378,6 +375,51 @@ static struct regulator_init_data pandora_vaux1 = {
.consumer_supplies = &pandora_vcc_lcd_supply,
};
+/* VAUX2 for USB host PHY */
+static struct regulator_init_data pandora_vaux2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_usb_phy_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data pandora_vaux4 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vaux4_supplies),
+ .consumer_supplies = pandora_vaux4_supplies,
+};
+
+/* VSIM for audio DAC */
+static struct regulator_init_data pandora_vsim = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_adac_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -402,6 +444,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.vdac = &pandora_vdac,
.vpll2 = &pandora_vpll2,
.vaux1 = &pandora_vaux1,
+ .vaux2 = &pandora_vaux2,
+ .vaux4 = &pandora_vaux4,
+ .vsim = &pandora_vsim,
.keypad = &pandora_kp_data,
};
next prev parent reply other threads:[~2010-02-18 1:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-18 1:31 [PATCH 00/23] Series short description Tony Lindgren
2010-02-18 1:31 ` [PATCH 01/23] omap: zoom3: enable ehci support Tony Lindgren
2010-02-18 1:31 ` [PATCH 02/23] omap3evm: Add mux settings for keypad Tony Lindgren
2010-02-18 1:31 ` [PATCH 03/23] omap3evm: Fixes after moving to matrix_keypad Tony Lindgren
2010-02-18 1:31 ` [PATCH 04/23] omap3evm: Configure GPIO175 for touchscreen PEN_IRQ Tony Lindgren
2010-02-18 1:32 ` [PATCH 05/23] OMAP: pandora: add DSS2 support and related regulators Tony Lindgren
2010-02-18 1:32 ` Tony Lindgren [this message]
2010-02-18 1:32 ` [PATCH 07/23] omap3: pandora: update defconfig Tony Lindgren
2010-02-18 1:32 ` [PATCH 08/23] omap3: Add platform data for the twl4030_codec MFD on IGEP v2 Tony Lindgren
2010-02-18 1:32 ` [PATCH 09/23] omap3: Fix typo on IGEP v2 board Tony Lindgren
2010-02-18 1:32 ` [PATCH 10/23] omap3: Add platform init code for EHCI driver on IGEP v2 Tony Lindgren
2010-02-18 1:32 ` [PATCH 11/23] omap3: Enable DSS2 for IGEP v2 board Tony Lindgren
2010-02-18 1:32 ` [PATCH 12/23] omap3: Add support for flash on " Tony Lindgren
2010-02-18 1:32 ` [PATCH 13/23] ARM: OMAP3: SDRC: add timing data for Numonyx M65KxxxxAM Tony Lindgren
2010-02-18 1:32 ` [PATCH 14/23] omap3: Use timing data for omap2_init_common_hw on IGEP v2 Tony Lindgren
2010-02-18 1:32 ` [PATCH 15/23] omap3: Update defconfig for IGEP v2 to allow new drivers andfeatures Tony Lindgren
2010-02-18 1:32 ` [PATCH 16/23] IGEPv2: Added WIFI support Tony Lindgren
2010-02-18 1:32 ` [PATCH 17/23] IGEPv2: Use Red Led1 as Heartbeat if configured Tony Lindgren
2010-02-18 1:32 ` [PATCH 18/23] AM3517: Enable basic I2C Support Tony Lindgren
2010-02-18 1:32 ` [PATCH 19/23] AM3517: Enable RTC driver support for AM3517EVM Tony Lindgren
2010-02-18 1:32 ` [PATCH 20/23] AM3517: Enable I2C-GPIO Expander " Tony Lindgren
2010-02-18 1:32 ` [PATCH 21/23] Add minimal support for DevKit8000 Tony Lindgren
2010-02-18 1:32 ` [PATCH 22/23] Add devkit8000_defconfig Tony Lindgren
2010-02-18 1:32 ` [PATCH 23/23] OMAP3EVM: PM: Update defconfig Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100218013205.32075.22933.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=notasas@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox