public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>,
	linux-omap@vger.kernel.org
Subject: [PATCH 13/23] ARM: OMAP3: SDRC: add timing data for Numonyx M65KxxxxAM
Date: Wed, 17 Feb 2010 17:32:23 -0800	[thread overview]
Message-ID: <20100218013223.32075.60686.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100218013012.32075.43788.stgit@baageli.muru.com>

From: Enric Balletbo i Serra <eballetbo@iseebcn.com>

Add timing data for the Numonyx M65KxxxxAM SDRAM chip, used on the
IGEP v2 board.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h |   51 ++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h

diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
new file mode 100644
index 0000000..cd43529
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -0,0 +1,51 @@
+/*
+ * SDRC register values for the Numonyx M65KXXXXAM
+ *
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+
+#include <plat/sdrc.h>
+
+/* Numonyx  M65KXXXXAM */
+static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
+	[0] = {
+		.rate		= 200000000,
+		.actim_ctrla	= 0xe321d4c6,
+		.actim_ctrlb	= 0x00022328,
+		.rfr_ctrl	= 0x0005e601,
+		.mr		= 0x00000032,
+	},
+	[1] = {
+		.rate		= 166000000,
+		.actim_ctrla	= 0xba9dc485,
+		.actim_ctrlb	= 0x00022321,
+		.rfr_ctrl	= 0x0004dc01,
+		.mr		= 0x00000032,
+	},
+	[2] = {
+		.rate		= 133000000,
+		.actim_ctrla	= 0x9a19b485,
+		.actim_ctrlb	= 0x0002231b,
+		.rfr_ctrl	= 0x0003de01,
+		.mr		= 0x00000032,
+	},
+	[3] = {
+		.rate		= 83000000,
+		.actim_ctrla	= 0x594ca242,
+		.actim_ctrlb	= 0x00022310,
+		.rfr_ctrl	= 0x00025501,
+		.mr		= 0x00000032,
+	},
+	[4] = {
+		.rate			= 0
+	},
+};
+
+#endif


  parent reply	other threads:[~2010-02-18  1:31 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-18  1:31 [PATCH 00/23] Series short description Tony Lindgren
2010-02-18  1:31 ` [PATCH 01/23] omap: zoom3: enable ehci support Tony Lindgren
2010-02-18  1:31 ` [PATCH 02/23] omap3evm: Add mux settings for keypad Tony Lindgren
2010-02-18  1:31 ` [PATCH 03/23] omap3evm: Fixes after moving to matrix_keypad Tony Lindgren
2010-02-18  1:31 ` [PATCH 04/23] omap3evm: Configure GPIO175 for touchscreen PEN_IRQ Tony Lindgren
2010-02-18  1:32 ` [PATCH 05/23] OMAP: pandora: add DSS2 support and related regulators Tony Lindgren
2010-02-18  1:32 ` [PATCH 06/23] omap3: pandora: update regulator setup Tony Lindgren
2010-02-18  1:32 ` [PATCH 07/23] omap3: pandora: update defconfig Tony Lindgren
2010-02-18  1:32 ` [PATCH 08/23] omap3: Add platform data for the twl4030_codec MFD on IGEP v2 Tony Lindgren
2010-02-18  1:32 ` [PATCH 09/23] omap3: Fix typo on IGEP v2 board Tony Lindgren
2010-02-18  1:32 ` [PATCH 10/23] omap3: Add platform init code for EHCI driver on IGEP v2 Tony Lindgren
2010-02-18  1:32 ` [PATCH 11/23] omap3: Enable DSS2 for IGEP v2 board Tony Lindgren
2010-02-18  1:32 ` [PATCH 12/23] omap3: Add support for flash on " Tony Lindgren
2010-02-18  1:32 ` Tony Lindgren [this message]
2010-02-18  1:32 ` [PATCH 14/23] omap3: Use timing data for omap2_init_common_hw on IGEP v2 Tony Lindgren
2010-02-18  1:32 ` [PATCH 15/23] omap3: Update defconfig for IGEP v2 to allow new drivers andfeatures Tony Lindgren
2010-02-18  1:32 ` [PATCH 16/23] IGEPv2: Added WIFI support Tony Lindgren
2010-02-18  1:32 ` [PATCH 17/23] IGEPv2: Use Red Led1 as Heartbeat if configured Tony Lindgren
2010-02-18  1:32 ` [PATCH 18/23] AM3517: Enable basic I2C Support Tony Lindgren
2010-02-18  1:32 ` [PATCH 19/23] AM3517: Enable RTC driver support for AM3517EVM Tony Lindgren
2010-02-18  1:32 ` [PATCH 20/23] AM3517: Enable I2C-GPIO Expander " Tony Lindgren
2010-02-18  1:32 ` [PATCH 21/23] Add minimal support for DevKit8000 Tony Lindgren
2010-02-18  1:32 ` [PATCH 22/23] Add devkit8000_defconfig Tony Lindgren
2010-02-18  1:32 ` [PATCH 23/23] OMAP3EVM: PM: Update defconfig Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100218013223.32075.60686.stgit@baageli.muru.com \
    --to=tony@atomide.com \
    --cc=eballetbo@iseebcn.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox