Re: [PATCH] mmc-omap: Add support for 16-bit and 32-bit registers

[Tony Lindgren <tony@atomide.com>]

* Andrew Morton <akpm@linux-foundation.org> [100513 12:36]:
> On Thu, 13 May 2010 12:29:35 -0700
> Tony Lindgren <tony@atomide.com> wrote:
> 
> > * Cory Maccarrone <darkstar6262@gmail.com> [100307 09:44]:
> > > From: Marek Belisko <marek.belisko@open-nandra.com>
> > > 
> > > The omap850 and omap730 use 16-bit registers instead of 32-bit, requiring
> > > a modification of the register addresses in the mmc-omap driver.  To resolve
> > > this, a bit shift is performed on base register addresses, either by 1 or 2
> > > bits depending on the CPU in use.  This yields the correct registers for
> > > each CPU.
> > > 
> > > Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
> > > Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
> > > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > 
> > Can you please queue this patch too? Ben's comments in this thread
> > were for the i2c-omap, not for this MMC patch. We've had this patch
> > in the omap tree for testing for quite a while now.
> > 
> > The patch is also available in at:
> > 
> > https://patchwork.kernel.org/patch/83971/
> > 
> > with the direct link to the mbox being:
> > 
> > https://patchwork.kernel.org/patch/83971/mbox/
> 
> I already have that, as mmc-omap-add-support-for-16-bit-and-32-bit-registers.patch

OK, thanks. I should have checked your queue first.

Tony