From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCHv3 4/4] [OMAP] HTCHERALD: MMC, I2C, HTCPLD and related devices Date: Tue, 6 Jul 2010 11:44:25 +0300 Message-ID: <20100706084421.GD3192@atomide.com> References: <1275110887-2918-1-git-send-email-darkstar6262@gmail.com> <1275407698-12945-1-git-send-email-darkstar6262@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mho-02-ewr.mailhop.org ([204.13.248.72]:63311 "EHLO mho-02-ewr.mailhop.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752069Ab0GFIob (ORCPT ); Tue, 6 Jul 2010 04:44:31 -0400 Content-Disposition: inline In-Reply-To: <1275407698-12945-1-git-send-email-darkstar6262@gmail.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Cory Maccarrone Cc: linux-omap@vger.kernel.org, linwizard-devel@lists.sf.net * Cory Maccarrone [100601 18:49]: > This change adds in MMC and I2C support to the HTC Herald board, as well > as adding the HTCPLD driver for the PLD used on this phone. It also > adds in the gpio-keys entries for the front directional keys and > selector and the cursor keys on the slide-out keyboard, and gpio-leds > support for the LEDs attached to the htcpld. > > The Kconfig was also modified to add 64 GPIOs and IRQs to the default > maximum number of each for the HTC herald. This is needed because the > HTCPLD chip on this board exposes an additional 32 gpios and 16 irqs > that would not fit in the default limits. > > The defconfig has been updated to reflect the changes. This one needs to be updated too to leave out the defconfig changes. Thanks, Tony