From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Jarkko Nikula <jhnikula@gmail.com>,
linux-omap@vger.kernel.org,
Eduardo Valentin <eduardo.valentin@nokia.com>
Subject: [PATCH 07/13] omap: rx51: Use REGULATOR_SUPPLY macro when initializingregulator consumers
Date: Wed, 07 Jul 2010 12:44:23 +0300 [thread overview]
Message-ID: <20100707094423.2562.78977.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100707094308.2562.91921.stgit@baageli.muru.com>
From: Jarkko Nikula <jhnikula@gmail.com>
There is REGULATOR_SUPPLY macro available for initializing the struct
regulator_consumer_supply so use it where applicable (all other supplies
than vdds_sdi) as it improves the readability.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 43 +++++++-------------------
1 files changed, 11 insertions(+), 32 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e350f0b..b4c3dd7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -301,48 +301,27 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
-static struct regulator_consumer_supply rx51_vmmc1_supply = {
- .supply = "vmmc",
- .dev_name = "mmci-omap-hs.0",
-};
+static struct regulator_consumer_supply rx51_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
-static struct regulator_consumer_supply rx51_vaux3_supply = {
- .supply = "vmmc",
- .dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vaux3_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
-static struct regulator_consumer_supply rx51_vsim_supply = {
- .supply = "vmmc_aux",
- .dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vsim_supply =
+ REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
/* tlv320aic3x analog supplies */
- {
- .supply = "AVDD",
- .dev_name = "2-0018",
- },
- {
- .supply = "DRVDD",
- .dev_name = "2-0018",
- },
+ REGULATOR_SUPPLY("AVDD", "2-0018"),
+ REGULATOR_SUPPLY("DRVDD", "2-0018"),
/* Keep vmmc as last item. It is not iterated for newer boards */
- {
- .supply = "vmmc",
- .dev_name = "mmci-omap-hs.1",
- },
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
};
static struct regulator_consumer_supply rx51_vio_supplies[] = {
/* tlv320aic3x digital supplies */
- {
- .supply = "IOVDD",
- .dev_name = "2-0018"
- },
- {
- .supply = "DVDD",
- .dev_name = "2-0018"
- },
+ REGULATOR_SUPPLY("IOVDD", "2-0018"),
+ REGULATOR_SUPPLY("DVDD", "2-0018"),
};
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
next prev parent reply other threads:[~2010-07-07 9:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-07 9:43 [PATCH 00/13] omap2/3/4 board updates for 2.6.36 merge window Tony Lindgren
2010-07-07 9:43 ` [PATCH 01/13] omap: zoom2: wlan board muxing Tony Lindgren
2010-07-07 9:44 ` [PATCH 02/13] omap: zoom3: " Tony Lindgren
2010-07-07 9:44 ` [PATCH 03/13] omap3: pandora: update gpio-keys data Tony Lindgren
2010-07-07 9:44 ` [PATCH 04/13] omap3: pandora: add NAND and wifi support Tony Lindgren
2010-07-07 9:44 ` [PATCH 05/13] omap: rx51: Set regulator V28 always on Tony Lindgren
2010-07-07 9:44 ` [PATCH 06/13] omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber Tony Lindgren
2010-07-07 9:44 ` Tony Lindgren [this message]
2010-07-07 9:44 ` [PATCH 08/13] omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier Tony Lindgren
2010-07-07 9:44 ` [PATCH 09/13] tsl2563 ALS support for Nokia N900 Tony Lindgren
2010-07-08 13:01 ` Ameya Palande
2010-07-09 8:35 ` Tony Lindgren
2010-07-07 9:44 ` [PATCH 10/13] omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp Tony Lindgren
2010-07-07 9:44 ` [PATCH 11/13] omap4: Board changes for 4430sdp tmp105 temperature sensor Tony Lindgren
2010-07-07 9:44 ` [PATCH 12/13] OMAP4: Add GPIO LED support for SDP board Tony Lindgren
2010-07-07 9:44 ` [PATCH 13/13] Add OMAP4 Panda Support Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100707094423.2562.78977.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=eduardo.valentin@nokia.com \
--cc=jhnikula@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).