From: Mikko Rapeli <ext-mikko.rapeli@nokia.com>
To: "De-Schrijver Peter (Nokia-MS/Helsinki)" <Peter.De-Schrijver@nokia.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"mturquette@ti.com" <mturquette@ti.com>,
"sameo@linux.intel.com" <sameo@linux.intel.com>
Subject: Re: [PATCH] twl4030 reboot workaround
Date: Thu, 29 Jul 2010 09:06:45 +0300 [thread overview]
Message-ID: <20100729060645.GE12063@edollo> (raw)
In-Reply-To: <20100728101811.GA543@nokia.com>
On Wed, Jul 28, 2010 at 12:18:11PM +0200, De-Schrijver Peter
(Nokia-MS/Helsinki) wrote:
> On Wed, Jul 28, 2010 at 11:41:32AM +0200, Rapeli Mikko (EXT-Ixonos/Oulu)
> wrote:
> > From: Mikko Rapeli <ext-mikko.rapeli@nokia.com>
> >
> > Original patch: http://marc.info/?l=linux-omap&m=126522625032441&w=2
> >
> > "Removes TWL4030 sleep script prior to rebooting, only on OMAP3. This is
> > necessary since DPLL3 reset causes SYS_OFFMODE pin to go low, resulting
> > in the sleep script being executed on TWL4030. This usually results in
> > VDD1 & VDD2 voltage collapse while ROM code is executing, followed by an
> > MPU Watch Dog reset or worse, an irrecoverable hang."
> >
> > Original patch resulted in a crash due to sleeping i2c calls late in the
> > reboot sequence. Here's how to trigger the crash:
> >
> > # cat /dev/urandom > /foo &
> > sync();
> > reboot(LINUX_REBOOT_CMD_RESTART2);
> >
> > Kernel trace from 2.6.32:
> >
> > Unable to handle kernel NULL pointer dereference at virtual address 00000000
> > pgd = c0004000
> > [00000000] *pgd=00000000
> > Internal error: Oops: 805 [#2] PREEMPT
> > ...
> > [<c00b3210>] (exit_mmap+0x1d4/0x1f8) from [<c006069c>] (mmput+0x34/0x110)
> > [<c006069c>] (mmput+0x34/0x110) from [<c0064a90>] (exit_mm+0x140/0x180)
> > [<c0064a90>] (exit_mm+0x140/0x180) from [<c00668ec>] (do_exit+0x5d8/0x6ac)
> > [<c00668ec>] (do_exit+0x5d8/0x6ac) from [<c0035858>] (die+0x2d4/0x2e0)
> > [<c0035858>] (die+0x2d4/0x2e0) from [<c0035904>] (baddataabort+0x0/0x50)
> > [<c0035904>] (baddataabort+0x0/0x50) from [<c0274ff4>] (i2c_transfer+0xec/0x104)
> > [<c0274ff4>] (i2c_transfer+0xec/0x104) from [<00000001>] (0x1)
> >
> > Fix is to move reboot preparations into a reboot notifier.
> >
>
> And what if we get an OMAP3 watchdog reset ? In this case there is no
> software to remove the script...
Well, I don't know. We have seen boot and reboot failures and this
remove script patch set has helped to reduce those failures.
-Mikko
next prev parent reply other threads:[~2010-07-29 6:07 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-03 19:43 [RFC] OMAP3: PM: disable twl4030 sleep sequence before reboot Mike Turquette
2010-02-03 19:43 ` [PATCH 1/2] MFD: TWL4030: introduce remove_script function Mike Turquette
2010-02-03 19:43 ` [PATCH 2/2] OMAP3: PM: remove TWL4030 A2S script before reboot Mike Turquette
2010-02-09 22:35 ` Tony Lindgren
2010-07-28 9:41 ` [PATCH] twl4030 reboot workaround Mikko Rapeli
2010-07-28 10:07 ` Gopinath, Thara
2010-07-29 6:07 ` Mikko Rapeli
2010-07-28 10:18 ` Peter 'p2' De Schrijver
2010-07-29 6:06 ` Mikko Rapeli [this message]
2010-07-28 15:47 ` Mike Turquette
2010-07-29 6:16 ` Mikko Rapeli
2010-07-29 6:41 ` [PATCH v2] " Mikko Rapeli
2010-07-29 19:10 ` Mike Rapoport
2010-07-30 5:48 ` Mikko Rapeli
2010-07-30 6:35 ` Gopinath, Thara
2010-07-30 18:39 ` Mike Turquette
2010-07-30 19:11 ` Gopinath, Thara
2010-08-01 6:31 ` Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100729060645.GE12063@edollo \
--to=ext-mikko.rapeli@nokia.com \
--cc=Peter.De-Schrijver@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@ti.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).